Table of Contents
How do I use XAIR?
Power on the X AIR mixer and move the REMOTE switch to ACCESS POINT. Open the Play Store, and search “x air.” When the X AIR app appears, press the INSTALL button and then ACCEPT. Open the Android Settings and select the Connections menu. Open the X AIR app, press Search, and then select your mixer.
How do I setup my XR18?
Apple iPad: Open Settings, then tap on Wi-Fi and turn Wi-Fi on. From the lists of networks, select your X Air mixer’s name (e.g. XR18-19-1B-07). Open the X Air for iPad app and it will show any X Air mixers found in that network with their IP address. Tap on the mixer’s icon to connect the app with your mixer.
How do I connect my iPad to my xr18?
How do I connect my Behringer xr18 to my computer?
PC or Mac via Ethernet Using an Ethernet cable, connect the X AIR mixer’s ETHERNET port to your computer’s Ethernet port. Move the REMOTE switch to ETHERNET and launch the X EDIT app. Click the Setup button and select the Connection tab. Click Rescan, select your mixer, and then click Connect.
How do I download XAIR?
On an Android tablet: You can find the X Air app in Google Play. Simply open Google Play on your Android tablet and search for “X Air.” Once you’ve downloaded and installed the X Air app on your iPad or Android tablet, see this article to learn how to set it up.
How many devices can connect to XR18?
Built-In Tri-Mode Wifi Router Access Point is the easiest way to connect up to 4 clients directly and concurrently (i.e., iPad, Android smartphone/tablet or laptop).
Does XR18 have Bluetooth?
The Behringer X Air is one of only a handful of fully tablet controlled devices and mixers on the market. Sure, there are plenty of desks that have Bluetooth or even allow for direct Android hook-up, but the XR18 has been built specifically for your tablet to run.
How do I install XAIR 12?
Simply download the free app to your iPad, set the BEHRINGER X AIR mixer to Access Point mode and connect your iPad to the XR12 network that will show up. After launching the X AIR app, select the mixer image, and all of your X AIR mixer’s settings can now be adjusted directly from your iPad.
Can you connect two Behringer XR18?
No, you can not daisy chains the Behringer XR18.
Does the Behringer XR18 have phantom power?
Does this model have phantom power? Answer: Yes, The XLR input will give you phantom power look on the mic input for the phantom power button click on or off.
What is Behringer XAIR?
X Air Series 18-channel, 12-bus Stage Box/Rackmount Digital Mixer for iPad/Android Tablets with 16 Gain-Programmable Midas Preamps, Integrated Wi-Fi Module, Multi-channel USB Audio Interface, and Rack Ears.
How do I find my XR18 IP address?
Apple iPad: Start the Settings/Wifi dialog on your iOS. Switch ‘Wifi’ on. Select your X AIR mixer’s name from the list of networks, e.g. “XR18-19-1B-07”. Open your X AIR for iPad app and it will show any X AIR mixers (‘Devices’) found in that network, with their IP address, which in this case is 192.168.
Can you connect XR18 to X32?
A: The XR18 does not have AES50 network ports, therefore the X32 cannot control the XR18. The XR18 is a stand-alone mixing console, and cannot be used as a networked on-stage mixer, despite the fact that it looks like it can be.
What is a good reverb setting for vocals?
Move the pre-delay to about 30-40% or so as a starting point and see how it sounds. With your EQ, maybe set the high-pass around 200Hz and the low-pass at about 12kHz. In a situation like this, you may want to have more body in the reverb. The following example shows a dual-reverb setup.
What is the best type of reverb for vocals?
And in general, that’s why plate reverb works well on vocals. Now, let’s go back to the idea of short decay times, because shorter decay times also work well on vocals, because we don’t want to make the vocal go too far back in the mix.
How can I thicken my live vocals?
Use temporal, tuning, and low level compressing effects to create a vocal that sounds thick, and dense enough to cut through your mix. The idea is to create multiple reflections and voices, that can be combined with and augment the original signal.
What is FX send used for?
Aux sends are sometimes labeled with different names such as “effects send,” “FX send,” MON (short for “monitor”) or even “foldback,” but they all work the same way: They serve as a secondary output from a channel that routes the signal to a place other than the main left and right speakers.
How do FX sends work?
The FX loop sends the post amplified/equalized signal out of the amp (The SEND jack), and into a pedal of your choosing. That signal is then processed through the pedal and fed back into the amp before the Power Amp section of the amplifier (The RETURN jack).
How do aux sends and returns work?
An “Aux Send” is a type of output used on most live sound and recording mixers. Typically, the output of the effects processor will be brought back to a stereo or aux return on the mixer. This allows you to add those effects to an output or channel on your mixer.
Is FX send mono or stereo?
The bus appears at the console’s FX send output and can be fed from there to an external effects device. The return from the effects unit is then brought back into the console on the stereo channels. Each FX send is mono and features up to +15 dB gain.
