Table of Contents
A clogged filter is one of the leading reasons for a heater blowing cold air. But even if you swap the air filter with a brand new one, dirt and debris can still be found within the unit. This could eventually lead to overheating. If your furnace looks pretty dirty, call an HVAC provider for a professional clean.
How do you fix a furnace that blows cold air?
How To Troubleshoot Furnace Blowing Cold Air Step 1: Check Thermostat Setting. First and most importantly, make sure your thermostat is set to Heating Mode. Step 2: Evaluate and Adjust Your Vents: Step 3: Assess Furnace Filters and Replace Filters If They Are Dirty. Step 4: Call An HVAC Pro.
Why is my furnace running but no heat?
Dirty filters are the most common cause of furnace problems. Dust and dirt restrict airflow—and if the filter gets too clogged, the heat exchanger will overheat and shut off too quickly, and your house won’t warm up. If the blower is running but no heat is coming out, replace the filter.
Can a bad thermostat cause a furnace to blow cold air?
Problem #1: A thermostat issue One of the most common causes of a furnace blowing cold air is a problem with the thermostat.
Why does cold air come out of the heat vent?
Explanation: Leaks in your ductwork means that cold, unconditioned air from inside your attic gets sucked into your ductwork. That cold air mixes with the warm air from your furnace, causing the air coming from your vents to feel considerably cooler than it should.
What would cause a furnace not to kick on?
The Pilot Light (Faulty Ignition Sensor) The pilot light or ignition sensor is usually the most common issue when your furnace will not ignite. This is typically the problem if you can hear your furnace click on but it does not fire up. If the sensor or ignitor is dirty, it will need to be cleaned.
How do you manually reset a furnace?
Follow these simple steps: First, turn off the power supply to the furnace by turning off the breaker in the circuit box. Locate the reset button on the furnace and press it to reset the furnace. If the button is popped up, press it down. Return the cover to the blower compartment and turn the power on.
How do I fix cold air coming out of my vents?
How to Keep Cold Air Out of Your Vents Install insulation. Poor insulation causes rapid cooling of the air as it moves through your home. Check connections. Over time, the connections in your ductwork can come loose. Update your HVAC. Older HVAC systems are less efficient and require more upkeep than modern models.
Can a bad thermostat cause furnace not to work?
Thermostat Isn’t Working One of the most common furnace problems is a malfunctioning thermostat. This will cause your thermostat battery to run, and cause your furnace to work inefficiently. Check this by setting the fan on auto, and seeing if it is running constantly at all heating settings.
How long does it take for furnace to reset?
Either way, restarting a furnace is a relatively simple task that takes no longer than 10 minutes to complete. Follow these steps to reset your gas furnace: Turn the circuit breaker off and switch the furnace power button off too. Never touch the breaker with wet hands and use only one hand to do it.
Do all furnace blower motors have a reset button?
All furnaces are equipped with a reset button. They are generally red or yellow and are located inside the blower compartment. The reset button is a safety feature that will shut down the furnace when a problem is detected, often a hot or overheating furnace, before it trips the circuit breaker.
Where is the reset button?
Alternatively referred to as the reset switch, the reset button allows devices that utilize it, such as a computer or peripheral to be rebooted. Usually, the button is on the front of the device, next to or near the power button.
What will blocking a cold air return do?
Blocking air return vents causes your system to work harder, as there is less air flow to move the air back to the furnace. This continued strain on the HVAC system can lead to a decrease in performance and more HVAC repairs down the road.
How do you check for clogged air ducts?
A specific duct may be clogged if there’s no improvement. From there, you can inspect your ductwork by first unscrewing the vent covers and checking behind the vent grille for debris. Use a flashlight to check the inside of the ducts, taking note of any damage around the seams and making sure the dampers are open.
What are signs of a bad thermostat?
Signs My Car’s Thermostat Is Going Bad or Has Failed Completely Odd Temperature Gauge Readings. Your temperature gauge should register cold when you first start your car and slowly build up to normal as the engine warms up. Air Temperature Changes. Coolant Leaks. Strange Sounds. Heater Problems.
How do you tell if you need a new thermostat in your house?
Signs You Need a New Thermostat Heating or cooling system will not turn off or on. The temperature reading is incorrect. Recent spike in your energy bill. Frequent temperature fluctuations. Thermostat is 10 years old or older.
How do you know if something is wrong with your furnace?
Signs Your Furnace is Going Out Increasing illnesses. High furnace age. High and unexplained utility bills. Sudden troublesome noises. Pilot flame color. Dry air. Soot. Frequent repairs.
How often should furnace kick?
On average, furnaces should kick on and off anywhere from 3-8 times per hour. However, if your furnace does so more frequently, don’t assume it’s short cycling just yet.
