Table of Contents
What would cause a Whirlpool dryer not to start?
The thermal fuse is the most common problem with Whirlpool dryers not running. The vent being stopped normally causes dryers to overheat. So if your thermal fuse is bad you should check the vent. To check the thermal fuse, first unplug dryer and remove back.
Why won’t my dryer start all of a sudden?
Common dryer issues include a faulty door switch or start switch and control problems such as a broken dryer timer or faulty electronic control board: If the drum light doesn’t turn off, a failed door switch is the likely reason the dryer won’t start. A blown thermal fuse often prevents an electric dryer from starting.
Is there a reset button on a Whirlpool dryer?
You can reset a Whirlpool dryer by pressing and holding the start button for a few seconds. This should start the reset automatically. If it doesn’t you might have you work your way through some of the individual parts of the cycle until it finally will reset on its own.
When I push the start button on my dryer nothing happens?
Dryer: Why won’t my dryer start? You push the start button–and nothing happens. A broken power cord, failed push-to-start switch or a bad timer can also prevent the dryer from starting. Some dryers use a motor relay to control the drive motor, so a broken motor relay can prevent the dryer from starting.
What causes a Whirlpool Duet dryer not to start?
Several factors may cause your whirlpool duet dryer not to start. It may be because of power issues, a faulty motor, problems with the start button, a blown thermal fuse, or a defective door switch. You can troubleshoot most of these problems, but if unsure, please call a professional.
How do I reset my Whirlpool front load dryer?
If your Whirlpool dryer displays a “PF” error code, indicating a recent power failure, the dryer will need to be reset and restarted. This is done by pressing “Start” for a few seconds to restart the dryer. If the dryer does not restart automatically, select a new cycle and any options then press “Start” to begin.
How do you tell if a thermal fuse is blown without a multimeter?
You can use jumper wires to test whether a thermal fuse is faulty if you don’t have a multimeter.Test a Thermal Fuse with Jumper Wires Step 1: Remove the Thermal Fuse. Step 2: Disconnect the Thermal Fuse. Step 3: Replace or Reattach the Thermal Fuse.
How do I reset my Whirlpool?
Rotate your dial until you have the following three lights illuminated: RINSE, WASH, and STOP. Then turn off your washer and unplug it for ten seconds. When you turn it back on it should be reset.
Does a Whirlpool dryer have a fuse?
Remove the back access panel on the dryer, and look for the exhaust duct near the bottom of the unit. The thermal fuse is either circular or oblong, often white plastic with black material in the center and two wire leads. The thermal fuse is mounted on the exhaust duct.
How do you reset a dryer circuit breaker?
Find the breaker for the dryer circuit in the main panel. It’s a double-gang breaker — meaning that it consists of two breakers connected by a bar — and if it has tripped, you’ll see the orange warning flag on both breakers. Reset it by flipping the bar all the way off and then flipping it on.
How do I know if my dryer start switch is bad?
As a safety feature, the dryer will not work with an open door. When the switch is broken, it is unable to tell the control panel the door is shut, so the dryer will not turn on. The only way to tell if the switch is faulty is to take it out of the dryer and test it with a multimeter.
How do I reset my Whirlpool Duet dryer?
Check the thermal fuse for continuity. If it checks good do this: Be sure the dryer is in Standby Mode (plugged in and all indicators off). Press the following button sequence: MORE TIME ➔ LESS TIME ➔MORE TIME ➔ LESS TIME – all within 5 seconds.
How do I start my Whirlpool Duet dryer?
On the control panel of the Whirlpool Duet dryer, and similar dryers, you push both a “Power” button and an actual “Start” button to use the dryer. A cycle knob allows you to select your preferred drying cycle, but the “Start” button must be pressed to start the load of laundry.
How much does it cost to replace a dryer thermal fuse?
Other Costs to Fix a Dryer Part Material Cost Total Cost Thermal fuse $5-10 $80-$130 Dryer thermostat $3-20 $180 Bearing $50 $130-$250 Roller $10-30 $90-$230.
Will dryer start if thermal fuse is blown?
Will the dryer run if the thermal fuse is blown? Unlike a thermostat that can reset itself, once a dryer thermal fuse blows, it will need to be replaced with a new one before the dryer will run.
What happens when the thermal fuse goes out?
Symptoms. Many dryers simply will not run once a thermal fuse triggers. On other models, the drum continues to turn and the dryer operates, but the heating element does not. Clothes come out of the dryer wet once the appliance completes its drying cycle.
What does PF mean on Whirlpool dryer?
A PF (Power Failure) error code indicates that the drying cycle has been interrupted by a power failure. Touch and hold START to restart the dryer cycle or press POWER to clear the display.
