Table of Contents
Some of the possible serious reasons for pilot lights to go out include loose or broken gas valves, thermocouples or heat exchangers, faulty venting, low gas pressure, or high winds. If you believe there is a serious problem, don’t hesitate to contact a professional.
Why would my pilot light go out?
Improper Venting & Airflow Sometimes a pilot light can go out as a result of some source of wind or air simply blowing it out. If this happens, there could be an issue with how your flue pipe is set up or how your system is venting.
How do you fix a pilot light that keeps going out?
This is and easy fix, simply let it cool down and brush off the dirt or debris. Your thermocouple might bend. The end that sits near the pilot light flame is what communicates with the gas valve and tells it to open or close. If it is bent away from the flame it won’t register heat and will keep the gas valve closed.
Why does my stove pilot light keep going out?
Sometimes pilot lights go out because the flame is set too low. The owner’s manual provides information for adjusting the flame. Other problems like low gas pressure, a loose or faulty thermocouple or a gas control valve that’s not working right can also cause the pilot light to keep going out.
How much does it cost to replace a thermocouple?
It costs $150 to $250 to replace a thermocouple. It checks to make sure the pilot light is on. It will shut the gas off if it’s not.
How do I know if my thermocouple is broken?
If you can’t get the flame to light at all, and you’re sure the gas is on, there’s probably an obstruction in the pilot tube. If the flame lights and goes out when you release the gas control knob after holding it in for the recommended 20 to 30 seconds, that’s the sign of a thermocouple malfunction.
Can you clean a thermocouple?
Yes, you can clean a thermocouple, but the task must be done with a light touch. Remove the thermocouple from the process assembly, using a steel wool or emery cloth, lightly clean the tip removing any build up.
How long does a thermocouple last?
Thermocouples can last up to 10 years if properly installed and maintained, while furnaces can last 15-20 years, although either may wear out sooner in multifamily units.
Does gas still flow when pilot light goes out?
If your pilot light repeatedly goes out, this is a likely culprit. If this flame sensor should fail, gas will continue to flow even after the pilot light has been extinguished, causing a safety hazard, and requiring immediate repair.
Why does my pilot light keep going out on my natural gas heater?
If your furnace pilot light keeps going out, it’s likely you have a broken thermocouple in your gas furnace. The thermocouple is a rod that comes into physical contact with the flame in your system. When this component is not able to detect the flame, it will close the gas valve to prevent a gas leak in your home.
Why does my pilot light keep going out with a new thermocouple?
Thermocouple Issues Over time, thermocouples can malfunction, accumulate dust buildup, or the device can get bent away from the pilot light’s flame. In either case, the thermocouple will struggle to sense the pilot light and stop the gas supply.
Can I replace a thermocouple myself?
1 cause of pilot lights that won’t stay lit is a worn-out thermocouple. It’s easy to replace and a new one costs $5 to $10. Then detach the thermocouple from the burner and take it with you to the home center or hardware store to ensure you buy the right replacement.
How much does it cost to fix a pilot light?
Pilot light replacement or lighting cost Water heater pilot light replacement costs $50 to $200. The pilot light produces a flame to ignite the gas burner. Plumbers charge $45 to $150 per hour to reignite the pilot light, and the task typically takes 1 hour or less.
How much does it cost to replace a pilot light?
You can replace the thermocouple yourself for around $20. If you hire a contractor to do the work, it will cost $45 to $150. A contractor fixing the thermocouple and the pilot light will usually be able to replace both in one hour, meaning it will be $45 to $150 for both.
Can I bypass a thermocouple?
Realistically, you have just disabled the thermocouple, but you can also reach in and unclip it from its holding bracket where it meets the pilot light. In most cases it will be held on with a gravity clip, but some are held on with a screw that must be removed with a small screwdriver.
What can go wrong with a thermocouple?
Six Common Causes for Thermocouple Temperature Measurement Errors Selecting the Wrong Type of Thermocouple on the Transmitter. Problems Related to the Thermocouple Extension Wire. Inherent Variations in Alloys. Temperature Variations Around the Reference Junction Connection. Thermocouple Grounded at More Than One Location.
How do you clean a thermocouple pilot light?
How to Clean a Pilot Light Cut off the gas to your furnace. Remove the pilot light and thermocouple assembly. Use your pliers or wrench to remove the pilot light and thermocouple from the bracket. Using the wire brush, brush away the carbon buildup and soot from both components.
