Table of Contents
One of the most common reasons your tumble dryer decides to blow out cold air instead of hot is, rather ironically, because it has overheated. If your tumble dryer does not have a reset button it is likely you will need to replace your thermostat and thermal overload cut-out (TOC).
Why would a dryer stop blowing hot air?
If you can’t feel air blowing, then it’s probably clogged. Another possible reason why your clothes dryer is no longer producing hot air is because the heating element is broken. Assuming your exhaust vent isn’t clogged, and the motor/drum are turning properly, a broken heating element is the most likely culprit.
Why is my tumble dryer working but not heating up?
If your tumble dryer isn’t heating up, it’s likely that the heater may have tripped and needs to be reset. The reset button is usually situated under the back panel of your tumble dryer, which you’ll need to remove by unscrewing it. Sometimes it may be on the back panel, so you won’t need to remove it.
How do I fix my dryer from blowing cold air?
To replace them: Dislodge the wires and unscrew the faulty parts. Get your new replacement parts and screw in place of the old parts. Attach the wires to the metal arms on either side of the components. This is their connection to the heating element. Replace the back of your tumble dryer.
How do I stop my dryer vent from blowing cold air?
If cold air comes into your laundry room through the dryer vent, you should be able to stop it fairly easily. The vent should have a flap (or flaps) at the end to stop air infiltration (see photos). Go outside and make sure there’s a flap and that it’s not stuck open. If the flap works well, check the caulking.
How do I know if my dryer heating element is bad?
If the heating element isn’t working properly, the dryer will still spin and the cycle will complete, but it won’t get hot enough to help dry the clothes. Heating elements can naturally wear out over time, but overloading the dryer, not cleaning the lint screen and poor ventilation can all speed up that process.
How do I know if my dryer vent is clogged?
How To Tell If Dryer Vent Is Clogged Excess Dry Times. One of the first signs that your dryer vent is clogged is when your clothes are no longer fully drying during a regular dry cycle. Burning Smell. Have you noticed a burnt odor coming from your dryer whenever you have a load going? Hot Exterior. Sizable Lint.
Why is my dryer cold in the winter?
Cold air drafts in your laundry room are often caused by stuck dryer vent flaps or faulty caulking. The blocker has a floating shuttle on the interior that rises when hot air blows through the dryer vent and closes when the dryer is not in use, which prevents cold air from blowing through the vent and into your home.
How much does it cost to replace a thermostat in a dryer?
Other Costs to Fix a Dryer Part Material Cost Total Cost Dryer thermostat $3-20 $180 Bearing $50 $130-$250 Roller $10-30 $90-$230 Timer $50-$70 $130-$270.
Does cold weather affect dryers?
Cold weather affects your appliances too – particularly those in basements & garages like washers & dryers. When it comes to your washing machine, remember that it’s all about water, making it vulnerable to cold weather.
Can I insulate my dryer vent?
If your dryer air and lint all fully escape your home and crawlspace, then this is likely the case. Insulating dryer vents pipes can be accomplished in two main ways. These use fiberglass batts and tape/twine to thoroughly wrap the duct or purchase a prefabricated dryer vent sleeve.
How do you weather proof a dryer vent?
Apply a 1/4- to 1/3-inch bead of silicone caulk around the inside rim of the dryer vent. Make sure the caulk doesn’t touch the dryer vent tube that goes into the wall. Reinsert the dryer vent in the hole and press around the edges to firmly secure it in place.
How often do dryer heating elements go out?
Bottom Line. If the dryer is well-maintained and the vents and lint traps are kept clean, the heating element can last between 8 and 18 years. If the dryer is used on a daily basis and is not kept well-maintained, the heating element can burn out at any time.
Why is the dryer not drying?
Check the Air Vent and Duct Clogged air vents are a common cause for poor airflow in clothes dryer systems. One way to see if your dryer’s air vent is clogged is by turning on your dryer and going outside to feel the flow of air leaving the vent. If it’s slow and not very warm, your vent may be due for a good cleaning.
How long does a dryer heating element last?
The heating element can last between 8 and 18 years if the dryer is well-maintained and the vent and lint traps are clean. The heating element can burn out if the dryer is not kept well-maintained.
Do all dryers have a reset button?
Many dryers are equipped with a reset button on the control panel. If the motor won’t run, let the dryer cool for about ten minutes. If there are no problems with the motor, switches, or electrical system, this should restart the dryer.
