Table of Contents
If your washer won’t drain or spin, the water level control may be faulty. Open the machine’s control panel and look for a plastic tube attached to the water level valve. If it’s clogged, clear it out with vinegar. If the valve itself is corroded, it may need to be replaced.
What is wrong with my washer if it won’t drain?
There are a few possibilities why your washing machine won’t drain. Your washer may have a clogged drain hose or the pump may be broken. A broken lid switch or belt could also be the culprit. It may even be something as simple as the hose being jammed.
How do I know if the motor is broken on my washing machine?
If the machine is filling and emptying as normal but the drum isn’t turning, or if it’s making some sort of spluttering noise, or if you can see sparking coming from underneath the front of the machine these are all likely to be caused by worn brushes and you’ll need to replace them.
Why are my clothes still wet after spinning?
Overloading can lead to an imbalance that reduces the washer’s spin speed, leaving clothes too wet after spin cycle completes. If the washer leaves clothes soaked after a large load, remove some items, redistribute others and run another rinse and spin cycle.
How do I know if my washing machine drain hose is clogged?
If the hose is clogged, it can prevent the water from being pumped out of the machine. To test this, remove the drain hose attached to the washer and make sure it is clear. An easy way to check that the drain hose is clear is to blow air through it.
Why does water stay in washing machine drum?
The outer drum is stationary and contains the water, the inner drum rotates and holds the clothes for washing and spinning. The water doesn’t drain out the bottom because the regular drain pipe is above the top of the drum – the water will stay until the drain pump is turned on during the drain and spin cycles.
How much does it cost to replace a motor on a washing machine?
A washing machine motor replacement cost runs an average of $300 to $500. When a washing machine motor fails, it may be time to invest in a new machine.
Is it worth replacing a motor in a washing machine?
A relatively new washer may not break down regularly, hence it may be more affordable to repair it. Getting replacement parts for modern machines can be easier than finding components for older models. Washing machine repair is recommended when the repair cost is less than 50 percent of a new machine’s price.
Do washing machine motors burn out?
Any of the bearings in the washing machine’s transmission, the tub bearing or the sleeve bearings in the motor itself can cause early motor burnout. Unfortunately washing machine motors are not designed to be disassembled and repaired, so you have to replace the motor.
How do you position a washing machine drain hose?
In order for the drain hose on your Top Load washer to function properly, the drain must be at least 30″ up from the floor and less than 8 feet high. In order for the drain hose on your Front Load washer to function properly, the drain must be at least 24″ up from the floor and less than 8 feet high.
How do I know if my washing machine drain pump is bad?
Put your finger into the drain outlet and feel the impellers if the pump freely turns. One or more of them may be broken. If so, you’ll be able to feel them while you’re turning the pump flywheel with your other hand. You also may see broken pieces of plastic in the bottom of the pump housing.
Can you pour Drano down washing machine drain?
Can I put Drano down my washing machine drain? Yes. Drano or any drain cleaner can be used to unclog your washing machine drain, but make sure you run your washer without a load of laundry before normal use.
Where is the drain pump on a washing machine?
The drain pump is located at the bottom of your washing machine, but can be easily accessed in order to replace it if need be. If your washing machine is failing to drain during a wash cycle, it could be that there is a problem with the drain pump.
How many years does a washing machine last?
A typical washer should last 10-13 years. Top-loading washers typically last a few years longer than their front-loading brethren. If you use a stacked washer/dryer combo, you may have to replace both if one starts acting up.
Is it worth fixing a 6 year old washing machine?
As a general rule, if it costs less than 50% of the price of a new washing machine to repair your old one, you should choose the repair option. But, you should also consider whether or not there is a warranty coverage on your washer and think about economic realities.
How do I know if my washing machine belt needs replacing?
Diagnosing A Bad Belt Use a couple of bricks or small paint cans to prop up the front edge of the washer. This will allow you to easily see the belt, as well as its motor assembly. If your belt displays any signs of fraying, cracking, or burning, plan to replace it at once.
Is it worth trying to fix a washing machine?
Repair: If the repair would cost less than 50% of the price of a new appliance and your machine still has several expected years of life left, a quick fix could be a cost-effective solution over replacing the entire washer. An active warranty can also make any repair worthwhile.
