Table of Contents
Toilet seats often wobble because the holes in the toilet-bowl rim are larger than the diameter of the bolts, allowing movement that eventually makes the nuts loose. One is to buy a kit containing rubber or plastic bushings that fit over the top of the bolt, filling the space around the bolt and preventing the motion.
How do I stop my toilet seat from moving sideways?
Related Articles Lower the seat and locate the two screw covers at the back of the seat. Put the flat-head screwdriver in the screw slot and hold it steady while you unscrew the nut from underneath the bowl. Remove the nut and bolt and take the seat off the bowl. Insert the screw back in the holes.
How do you tighten a toilet seat?
Using your fingers or a broad tip screwdriver, turn the bolts clockwise to tighten. If the bolts spin and don’t tighten, you’ll need to use pliers to grip the nut on the underside of the toilet while turning the top of the bolt with a screwdriver. Tighten until the seat stops wiggling.
Is there a tool for tightening toilet seats?
From under the bowl, turn the toilet seat nuts clockwise until they are tight. A ratchet wrench with a deep socket is usually the easiest way to tighten these bolts, but an adjustable wrench can also be used.
Why does my toilet seat not stay up?
The most common reason toilet seats won’t stay up is because the seat was installed too far back towards the tank. Unscrew the seat, pull it as far forward as you can, and retighten. This should give your seat the extra angle it needs to stay upright.
Are all toilet seat hinges the same?
There are two main types of hinge fixings, top fixing and bottom fitting, and it is worth noting that not all hinges are suitable for all toilets. Bottom fixing toilet seat hinges feature a traditional style fixing which includes fitting two bolts down into your pan and then tightening them from underneath.
Can you fix a soft closing toilet seat?
You can make adjustments to the bolts that hold the seat in place to fix a loose toilet seat. The only reason you would need to adjust soft-close hinges is if your soft-close seat is not closing at the right speed. Lift the toilet seat straight up off the hinges from the upright position.
How should a toilet seat fit?
Make sure that your seat sits evenly on the perimeter of your toilet bowl and centre it. Use your hands or pliers to secure the wingnuts once you’re happy with the seat’s position. Be careful not to over-tighten them as you may want to adjust them once the new toilet seat is fitted.
Are toilet seat fixing holes Standard?
Modern toilets have standard hole centres. Replacement toilet seat kits usually have adjustment to allow fitting to the older or non standard types as well. These are the key measurements that you need, although most seats are adjustable so that they will fit the most common toilet bowl shapes.
What is a toilet seat hinge?
Among the parts of a toilet seat that wear with time are the toilet seat hinges. These hinges are located at the rear of the toilet seat. They serve to raise and lower the seat.
Why do soft close toilet seats stop working?
Slow Close Seat Not Working. In most cases, a slow close seat that is coming down too fast just needs to be cleaned. This means from the inside out. Over time, particles from usage can become lodged in and around the moving parts of the hinge.
What is bottom fixing toilet seat?
A bottom fixing is a more traditional style fixing, with two bolts that fit down into your pan and are then tightened from underneath. Top fixing hinges are used when there is no access to the bottom of the pan, like in some back to wall toilets, or modern one-piece style toilets.
How do you move a toilet seat forward?
Position it correctly. For fine tuning, rotate the hinge plate so allow you to get the fixing bolts into their holes. To move the entire toilet seat either forward or backward so that you can rest the seat against the cistern without falling, you can turn the hinge plates through 180 degrees.
Are toilet seat fittings different?
There are two types of toilet seat fixings: Bottom Fixings and Top Fixings. Top fixing toilets seats work by feeding two bolts into the pan which are then tightened from the top. Bottom toilet seat fixings are fitted from the top and then tightened from underneath, often with wing nuts.
Is there different toilet seats?
Toilet seats don’t come in sizes, but they do come in two different shapes: round toilet seats and elongated toilet seats, each of which correspond to two different toilet bowl shapes. Round toilet seats are still the standard in most homes, and they’re the toilet seats you typically see most often.
How often should you replace your toilet seat?
Q. Why should I replace my toilet seat? While a toilet typically lasts at least 15 years, toilet seats last only about 5 to 7 years before they begin to crack or become stained to the point that, no matter how hard you scrub, they no longer appear clean. That’s when it’s time to consider replacement.
How do you remove top fix toilet seat fittings?
To remove ,the screw locates Into the nut ,one turn. Then press down on the screw. This pushes the coned nut down and releases the expansion / pressure. Then pull the whole thing upward ,with a wiggle, and out.
Does it matter what toilet seat to buy?
Types of Toilet Seats For most people buying a toilet seat, your choice between the two will be easy – you should go with whatever fits your toilet.
What material is best for toilet seat?
Material. When selecting a toilet seat, you can choose the material for the bolts, the hinges, and the seat itself. The hinge material selection should focus on durability—with stainless steel and zinc-plated options being the most durable and plastic being the least durable.
