Table of Contents
If the batteries are dying, your thermostat could be blinking the “Cool On” message. When your thermostat doesn’t have enough power, it won’t be able to start the cooling or heating process. To properly check your batteries, look for the “Battery Low Indicator” message on the thermostat display.
Why is my Honeywell thermostat blinking?
One of the most common causes of thermostat blinking is a power outage. When there is no power supply, it may lead to the blinking of your Honeywell thermostat once the compressor restarts when the power returns. During the restarting process, the pressure on the compressor causes blinking.
Why is my thermostat in delay mode?
A delay is used to protect your heating and cooling equipment from coming on too quickly (known as short cycling), which can cause damage. The thermostat has a built-in compressor protection (minimum off timer) that prevents the compressor from restarting too early after a shutdown.
What does cool on blinking mean?
If the “cool on” or the snowflake icon is flashing, the thermostat is in delay mode, which can take up to 5 minutes. This delay is to protect your equipment from short cycling.
Why does my thermostat blink?
If you see a flashing light on your thermostat, that’s a signal that there’s a problem with your outdoor unit. Thing is, that signal doesn’t mean your indoor unit is made aware of the problem. Your indoor unit will probably continue running, and the thermostat will keep blinking until the problem is fixed.
How do I get my Honeywell thermostat off wait?
First, turn off your thermostat and HVAC equipment. Then locate then controls for your equipment and switch them off. Wait for a few moments (10-30 seconds) before turning them back on, in reverse order.
How do you reset a Honeywell thermostat?
Resetting a Honeywell Thermostat Power off the thermostat and remove the batteries. Put the batteries in the wrong way, with negative to positive and positive to negative. Wait ten seconds and put them back in the correct way. Your thermostat will be reset to factory settings.
Why my Honeywell thermostat is not working?
One of the most common issues with digital thermostats is that there is no display. Another common issue for not having a display on your Honeywell thermostat is because the circuit breaker may have been tripped. HVAC systems typically have their own circuit breaker, so check the box to make sure the switch is on.
Why is cool flashing on my thermostat Braeburn?
Most newer Braeburn thermostat models will flash the word HEAT or COOL when the thermostat is calling for your heating or cooling system to run. When the call for heating or cooling is over, the word HEAT or COOL will become solid.
How do I reset my AC thermostat?
Reset the Thermostat The method to reset your thermostat will vary depending on the model. Common methods for resetting a thermostat include installing the battery backward for five seconds, pushing a recessed reset button with a pin or paper clip, or shutting off the breaker to the thermostat for 30 seconds.
Why do lights blink when AC turns on?
This is because your AC requires a large amount of electricity to initially start up. When it starts, it temporarily drains power from other appliances like your lights, causing them to flicker slightly.
How do I get my Honeywell thermostat to work?
A few tips and tricks you may want to try to get your Honeywell thermostat to turn on include: Replace the Batteries. You should start with the easy and obvious solution first. Check the Air Filter. Check the Circuit Breaker. Check the Wiring for Any Loose Connections. Reset Your Thermostat To Factory Settings.
What does it mean when Honeywell thermostat says wait?
The “Wait” message on a Honeywell Thermostat means the thermostat is waiting to activate the HVAC system. This is done to prevent damaging the HVAC system compressor. If the system is working properly, then “Wait” should disappear after a few minutes. It will then resume normal operation.
Why is the air conditioning not cooling?
Perhaps the most common cause of AC issues is clogged filters. Dirt, pet hair, pollen and dust can clog your filters. When filters get clogged, they begin to restrict the flow of air through your AC. The result is that the AC doesn’t cool your indoor air effectively.
How do I reset my Honeywell thermostat without battery?
To manually reset a thermostat, first turn off your thermostat using the power control switch. Then, turn off the breaker on your electrical panel. Wait about a minute, and then turn both back on. This should give the system time to reset.
How long does a Honeywell thermostat last?
The average lifespan of a thermostat is at least 10 years. Dust and aging wiring can cause the thermostats to malfunction after a decade.
How do you know if your Honeywell thermostat is bad?
The most obvious sign that your thermostat might be bad is if it has no power or is unresponsive. If there’s no change in your home’s temperature when you adjust the temperature, or the display is unlit or unresponsive, you might have a broken thermostat on your hands.
How do I fix an unresponsive thermostat?
If the thermostat is still unresponsive, make sure the breaker is shut off and remove the cover. If it looks dirty inside, use canned air or a soft artist brush to clean away accumulated grime that may be affecting its functionality. Then look for issues like loose wiring or terminal screws and tighten them up.
