Table of Contents
Dirty filters are the most common cause of furnace problems. Dust and dirt restrict airflow—and if the filter gets too clogged, the heat exchanger will overheat and shut off too quickly, and your house won’t warm up. If the blower is running but no heat is coming out, replace the filter.
What causes a furnace not to kick on?
The Pilot Light (Faulty Ignition Sensor) The pilot light or ignition sensor is usually the most common issue when your furnace will not ignite. This is typically the problem if you can hear your furnace click on but it does not fire up. If the sensor or ignitor is dirty, it will need to be cleaned.
Why is my furnace not responding to thermostat?
Loose connections, frayed wires, and aged wires all can cause your thermostat to eventually lose its connection to your A/C and heating system. Inspect your wiring thoroughly, making sure the connections are tight, and replace any wires as deemed necessary by you or an HVAC professional.
How do I reset my furnace?
How to Reset an Electric Furnace First, turn off the power supply to the furnace by turning off the breaker in the circuit box. Locate the reset button on the furnace and press it to reset the furnace. If the button is popped up, press it down. Return the cover to the blower compartment and turn the power on.
How do you tell if you need a new thermostat in your house?
Signs You Need a New Thermostat Heating or cooling system will not turn off or on. The temperature reading is incorrect. Recent spike in your energy bill. Frequent temperature fluctuations. Thermostat is 10 years old or older.
How do I know if my thermostat is broken?
7 Ways to Tell Your Thermostat Is Broken Thermostat Has No Power. AC or Furnace Won’t Turn On. Heater or AC Won’t Turn Off. Thermostat Doesn’t Match Room Temperature. Thermostat Doesn’t Respond. Short Cycling. Thermostat Forgets Programmed Settings.
How long does it take for furnace to reset?
Either way, restarting a furnace is a relatively simple task that takes no longer than 10 minutes to complete. Follow these steps to reset your gas furnace: Turn the circuit breaker off and switch the furnace power button off too. Never touch the breaker with wet hands and use only one hand to do it.
Where is the reset button?
Alternatively referred to as the reset switch, the reset button allows devices that utilize it, such as a computer or peripheral to be rebooted. Usually, the button is on the front of the device, next to or near the power button.
Do all furnace blower motors have a reset button?
All furnaces are equipped with a reset button. They are generally red or yellow and are located inside the blower compartment. The reset button is a safety feature that will shut down the furnace when a problem is detected, often a hot or overheating furnace, before it trips the circuit breaker.
Why is my gas furnace not lighting?
If your furnace won’t ignite, the source of the issue may be a broken flame sensor. The sensor is responsible for turning off the gas burners to avoid gas buildup. Once this component starts to malfunction, it may stop the burners from igniting altogether. Have an HVAC technician replace the flame sensor.
How do I test my furnace thermostat?
How to Test Your Furnace Thermostat Step 1: Reset the thermostat lower or higher. Step 2: Make sure the thermostat is ON. Step 3: Check the wiring. Step 4: Turn breaker back on. Step 5: Reexamine wires. Step 6: Wrap wires together.
How long do furnace thermostats last?
But, just how long will a thermostat last? They generally last about 10 years but can last longer depending on the make, model, and type of thermostat. Over time, these systems start to age and a thermostat may malfunction because of normal wear and tear, dust accumulation, wiring issues, and rusting.
Is my furnace broken?
Cold or uncomfortable houses are sure signs of a broken furnace. The furnace may cycle on or off, causing an uneven or inconsistent flow of heated air. If you don’t feel any moving heated air or detect any unusual odors or smells coming from your heating vents, that’s a sure sign of a broken or malfunctioning furnace.
What happens when the thermostat goes out?
HVAC system won’t turn on: The most obvious sign of a bad thermostat is that the HVAC system in your building won’t turn on or respond to the thermostat. You should be able to turn on your heating or cooling system from the thermostat, or change operation back and forth from heating to cooling.
Do furnace thermostats go bad?
If you’re wondering whether your thermostat can go bad, rest assured that it won’t happen for a while. Thermostats don’t typically have a set lifespan for maintenance, repair, or replacement (unlike air conditioners that need a tune-up every year).
How do you reset a furnace blower motor?
How to Find and Reset your Furnace Motor Blower Step 1: Turn off the power to the furnace. Step 2: Remove the blower compartment cover. Step 3: Make sure the blower is completely cooled off. Step 4: Locate the reset button. Step 5: Press the button in (assuming that this is your issue and that the button has popped).
When should furnace be turned on?
On average, furnaces should kick on and turn off anywhere from three to eight times per hour. However, if your furnace turns on and off more frequently, don’t assume the furnace is short cycling just yet.
