Why Is My Foam Cannon Not Working

There are many factors that would result is your foam cannon not working correctly, most often it’s because of not rinsing the nozzle after use. This simple step after use can and will ensure your foam cannon shoots out thick suds for a long time! Seriously, it works.

How do I make my foam cannon more foamy?

Your foam cannon uses advanced technology to mix the perfect mixture of air, water, and soap to shoot thick foam. Use warm water to help aerate the soap and water mixture, so you can effortlessly shoot thick suds. Don’t violently shake the solution once you’ve diluted the soap into your canister.

How much pressure does a foam cannon need?

The Professional Max Foam 8 Cannon works with any gas or electric pressure washer 500-3,500 PSI. Never exceed 4,200 PSI with either cannon. Minimum 1.4 GPM; 2.0 GPM recommended; Never Exceed 5.3 GPM.

Can you use Simple Green in a foam cannon?

Yes you can use it with no problem.

Do you hand wash after foam cannon?

The idea is to use the foam cannon first and clean as much as possible. Then, wash the car by hand to take care of any dirt that might still be left. This approach takes a bit more time. However, because the foam cannon works so quickly, using both methods may be faster than you think!Jan 13, 2022.

Can you use regular car wash in a foam cannon?

Regular car wash soap and car shampoo can be effectively applied with a foam gun. Car soap mixes with water in the foam gun’s canister to produce a frothy mixture. To get the most effective cleaning effect, finishing off with a hand wash using the two bucket washing method is unbeaten.

What is the ratio of soap to water in foam cannon?

Ensure your foam cannon soap ratio is 10:1 water to soap. Ensure your pressure washer can flow at least 1.4 GPM but preferably 2 GPM. Ensure your nozzle orifice is properly matched to your pressure washer’s GPM.

Is 1.2 gpm enough for a foam cannon?

Most foam lances require a minimum of ~2 gallons per minute (GPM), but the more basic (and affordable) electric pressure washers are generally around 1.2-1.6 GPM, well below the 2 GPM minimum.

Can I use Dawn dish soap in my pressure washer?

You can use Dawn dish soap in your pressure washer, but you need to dilute it properly with hot water. Take 1 tablespoon of liquid dish soap and dilute it in 1-1.5 quarts of hot water. However, the results of cleaning with Dawn dish soap might not be as effective as some special pressure washer detergents.

Do you put water in foam cannon?

We always use warm water because it helps the aerate mixture better. Reattach the canister to the head of the foam cannon. After adding soap and water to your foam cannon canister, simply reattach it to your pressure washer lance, get spraying!Apr 3, 2019.

Is 1.1 gpm good for foam cannon?

The role of the orifice in simple terms is to control the amount of water/flow that comes through the foam cannon. If you are using a pressure washer operating between 1.3 – 1.8 gpm and under 2000 psi a 1.1mm orifice is likely a good starting point.

Are foam cannons worth it?

Conclusion. Overall I would recommend using a foam cannon for some people, especially if you’re a car enthusiast that owns a larger truck or SUV. A foam cannon will undoubtedly cover your car with more soap than any other device, but if you don’t really want to use a pressure washer, they also make foam guns.

Why is my snow foam lance not working?

There are many factors that would result is your foam cannon not working correctly, most often it’s because of not rinsing the nozzle after use. This simple step after use can and will ensure your foam cannon shoots out thick suds for a long time!May 11, 2019.

Is it safe to use Windex on car paint?

Paint should not be applied with Windex. You should not use windex on your car’s paint because it is too harsh. Windex will eventually strip away the finish when used on this finish. As a result, you may notice that some areas of paint are chipping or falling off completely.

Can you use degreaser in a foam cannon?

First, keep the foam gun for only one purpose – washing cars. If you put engine degreaser in it, it may be next to impossible to remove the residual degreaser. Also, the degreaser will probably remove everything from your paint. Foam guns are not too precise.

Can you put bleach in a foam cannon?

Can You Use Bleach in a Foam Cannon? I suggest using about 3 ounces of dawn soap and fill the rest of the foam cannon with pure bleach. You don’t need to dilute the bleach because the pressure washer or garden hose water will do the dilution process.