Table of Contents
If you are having problems, check for loose or corroded wiring or broken antenna elements. Also check the direction the antenna is pointed. Try to keep the length of wire between your antenna and digital-to-analog converter box or digital television as short as possible for best reception.
How do I get my converter box to work?
Using the coaxial wire that comes with your Converter Box, plug one end into the “Out To TV (RF)” port on the Converter Box. Plug the other end into the “Antenna In (RF)” port on your TV. Plug the power cords on your Converter Box and TV into a power outlet, and turn on your TV and Converter Box.
How do I reset my digital converter box?
How to Reset a Digital Converter Box Turn on your converter box, go to the “Function” menu and then select “Factory Reset.” Enter your PIN number (created during the initial setup) when prompted, and press “Yes.” The reset process will now begin, reverting your converter box back to its factory settings.
How do you scan channels on a digital converter box?
How to perform a channel scan on a Digital Stream Converter Box Press the MENU button on the remote control then choose CHANNEL. Then choose AUTO SCAN which will scan for all available channels and will automatically store and update the channels that are found.
Why is my antenna not picking up channels?
It is important to check regularly for corrosion, loose cable fittings, or if a cable has been compromised. Try disconnecting the splitter and running the cable directly into the TV/converter box and run a channel scan. If reception improves, a distribution amplifier is likely to be the solution.
Why is the TV saying no signal?
Make sure your TV input is properly set to the correct input device. Change the channel or try a different input device or movie. The received signal may be weak. If your TV uses a cable or satellite box, you may need to contact your service provider for further assistance in improving the signal strength.
Is there a reset button on a converter?
There is no reset button.
Does a converter box need an antenna?
Does a converter box need an antenna? Yes. You are going to need a broadcast TV antenna to use a converter box. There are many indoor antennas that you can choose from, but first, you need to make sure you can get a signal where you live.
Will a universal remote work on a converter box?
A: You can use your universal remote with almost anything connected to your TV. You can control your Blu-ray, DVD, VCR,DVR, cable box, satellite, digital converter box, streaming devices and more.
How can I get my analog TV to work without cable?
If you receive TV programming via antenna, external DTV converter boxes are available that enable using older TVs. Placing the DTV converter box between the antenna and the TV converts incoming DTV/HDTV signals to signals compatible with any analog TV.
How do I get more channels on my digital converter box?
Access your television’s menu. Step Two: Following your television’s on-screen instructions for looking for new channels, re-scan the converter box or digital television without the antenna connected. Step Three: When the box finishes looking for channels, unplug your converter box or television for several minutes.
How do I setup my iView converter box?
Plug an HDMI cable into the HDMI OUT port on the back of the iView and plug the other end into an HDMI port on the TV. Take note of which port on the TV you plugged it in to. Turn on the TV and change the source to the HDMI port you plugged the HDMI cable in to. Plug the iView into an electrical outlet.
Why is my TV not finding analog channels?
If you are having problems, check for loose or corroded wiring or broken antenna elements. Also check the direction the antenna is pointed. Try to keep the length of wire between your antenna and digital-to-analog converter box or digital television as short as possible for best reception.
Can I use digital converter box with cable?
Connect the digital converter box to your TV. Coaxial cable – Plug one end of the coaxial cable into the “OUT” coaxial port on the back of your digital converter box, then plug the other end of the cable into the “IN” coaxial port (the one that the antenna cable was plugged into) on your TV.
What causes TV antenna to lose signal?
Common Sources of OTA TV Signal Interference Power lines – Overhead power lines leading to your home can decrease the strength of signals from broadcast towers, leading to a reduced antenna signal. LTE Cell Phone Towers – TV antenna interference is expected due to nearby LTE cell towers.
Why does my TV say no signal when HDMI is plugged in?
The “no signal error” on a TV is due to using the wrong HDMI cable, a faulty graphics driver or a damaged HDMI port.
How do I fix HDMI no signal?
Solution 2: Enable the HDMI connection setting If you want to connect your Android phone or tablet to the TV, make sure the HDMI connection setting is enabled on your device. To do it, go to Settings > Display Entries > HDMI connection. If the HDMI connection setting is disabled, enable it.
What input should my TV be on?
If you’re using a coaxial cable, your television’s on-screen input list will usually label it as either TV or ANTENNA. On the back of the television it will usually be labeled ANTENNA or a variant of it, such as ANT. Most televisions will also need to be on either channel 3 or 4 when using a coaxial connection.
