Table of Contents
Why is a spud wrench called that?
This piece of piping was called a ‘spud’. The spud wrench was designed to work on the bolts, collar and other pieces of the spud unit. The spud connected the toilet bowl to the reserve tank.
What is a spud wrench?
A spud wrench is a wrench with an adjustable or standard box wrench on one end and a tapered spike on the other. The spike can be used to line up bolt holes when installing pipe fittings, doing automotive work or—in the case of iron workers—for lining up bolt holes in girders and beams.
What is the difference between a spud wrench and a pipe wrench?
Differences Between the Spud Wrench and Pipe Wrench The Spud wrench has a smooth jaw enough to grip on nuts and bolts, while the pipe wrench often acts as a better fastener because of its gripping hook jaw and weight.
When was the spud wrench invented?
History of the Spud Wrench The Spud Wrench was created by Thomas Maddock in the early 1900s, and back then it was known as the Maddock Spud, and the design was later on bought by “Standard” in toilet company in 1920, now known as “American Standard” toilet company.
What is a podger Ratchet?
A podger is a tool that features a wrench on one end and a tapered spike or point on the other. Extremely popular with scaffolding and event staging the podger is a must have tool as it allows you to quickly and effortlessly assemble and disassemble scaffolding with ease.
Does a spud wrench have smooth jaws?
12″ Spud Wrench features narrow jaws to fit into tight places. Smooth, toothless jaws ideal for square or rectangular stock.
Why are construction wrenches pointy?
As the preceding posts point out, the tapered “spike” or “pin” end is very useful for aligning holes to allow the insertion of pins, bolts, rivets, or any thru-hole connector.
What size spud wrench do ironworkers use?
Cal-Hawk 12 inch Adjustable Iron Workers Construction Spud Wrench Tapered to 1-3/8″.
What is another name for a machinist hammer?
A ball-peen or ball pein hammer, also known as a machinist’s hammer, is a type of peening hammer used in metalworking. It has two heads, one flat and the other, called the peen, rounded.
What is the largest crescent wrench?
The CHANNELLOCK® 830 30″ Adjustable Wrench is the largest in the CHANNELLOCK® family.830 30-inch Adjustable Wrench. Overall Length 30.0 in. 762.0 mm Weight 12.17 lbs. 5520.22 g.
What is another common name for lineman pliers?
Lineman’s pliers (US English), Kleins (genericized trademark, US usage), linesman pliers (Canadian English), side cutting linesman pliers and combination pliers (UK / US English) are a type of pliers used by linemen, electricians, and other tradesmen primarily for gripping, twisting, bending and cutting wire, cable and.
Why are Stilsons called Stilsons?
The Stillson name is that of the original patent holder, who licensed the design to a number of manufacturers. The patent expired decades ago. Another type of wrench often used on pipes, the plumber wrench, is also called a pipe wrench in some places.
What is a Bobbejaan spanner?
Moncky), bobbejaan baboon, monkey + sleutel wrench, spanner. A monkey-wrench or shifting spanner.
Who made the first adjustable wrench?
In 1891, JP Johansson took out a patent on a spanner with two movable jaws. One year later, he improved the tool, and it became today’s adjustable spanner.
What does Podger mean in slang?
1 : a small drift used to bring rivet holes into alignment. 2 : tommy.
How do you use a Podger?
Holding those two pieces of the frame together, push the bolt through the bolt holes. Place the nut on the end of the bolt once it is through both pieces of the frame. Use the spanner or wrench end of the podger to tighten the nut onto the bolt tightly enough that it cannot come loose during use.
What is a scaffold ratchet used for?
The Scaffolding Ratchet (part number BS-63B) is three tools in one – tools that erectors need for easily and quickly engaging the posts, fasteners, and clamps on scaffolding. Since most scaffolding uses 7/8” hex nuts, the ratchet comes with a 1/2” drive pinned 7/8” six-point socket.
What is a speed handle used for?
The improved speed handle is extremely useful for tightening or loosening nuts and bolts, especially in areas where there is very little roof for operating a conventional wrench or conventional ratchet wrench.
Has serrated teeth on jaws for gripping power?
This tool can speed up your work because it has an open wrench at one end and a box-end at the other. This tool has serrated teeth on both jaws for gripping power. pipe wrench. This is the turning force applied to an object and is measured in inch-pounds or foot-pounds.
How long is a spud wrench?
Spud Wrench, 1-1/8-Inch Nominal Opening for Regular Nut.
What tool uses the impact of a hammer to indent metal?
A punch uses the impact of a hammer to: Indent metal before you drill a hole. To drive pins. To align holes.
What is a construction wrench?
Definition of construction wrench : an open-end wrench used by steel construction workers and having a long handle tapering to a blunt point that is used to hold matching holes (as for bolts or rivets) in alignment.
What is the purpose of the cross Pein in the hammer?
The Cross Pein is used to start the nail then the hammer is reversed and the nail driven home by the flat face. They are available with head weights in the range 225gm (8oz) to 454gm (16oz).
Which clamp can spread clamping?
Bar Clamp/Spreaders High Pressure bar clamps can be used for both clamping and spreading.
What is a Warrington hammer used for?
Warrington hammers are made specifically for cabinetmaking. The cross peen is used to start brads or finishing nails without the risk of damage to fingers. The round head, with the slightly belled face, lets you drive nails flush without marring surrounding wood.
What are the large wrenches called?
Pipe Wrench The pipe wrench is a bigger, sturdier adjustable wrench. They are usually used by plumbers to hold metal pipes and fittings together. However, the heaviness of this tool can leave behind scratch marks, which is why they’re usually used “behind the scenes.”Jan 11, 2022.
How big do wrenches get?
Standard wrench sizes range from 1/4 inch to 2 inches. It is also possible to buy jumbo size wrenches that range from 2 inches to 4 inches.
How much is a 24 inch crescent wrench?
Crescent 24″ Adjustable Tapered Handle Wrench – Carded – AC224VS, Chrome Was: $119.00 Details You Save: $13.88 (12%).
