Table of Contents
Applying flocculation ensures a high flux over filtration units as well as efficient and cost effective separation of cell material from supernatant. Used water can contain significant amounts of suspended particulate matter, which often takes long to sediment.
What is the purpose of flocculation?
Flocculation is a process by which a chemical coagulant added to the water acts to facilitate bonding between particles, creating larger aggregates which are easier to separate. The method is widely used in water treatment plants and can also be applied to sample processing for monitoring applications.
Why flocculation is important in water treatment?
Coagulation and flocculation are important processes in water treatment with coagulation aimed to destabilize and aggregate particles through chemical interactions between the coagulant and colloids, and flocculation to sediment the destabilized particles by causing their aggregation into floc.
What is difference between flocculation and Deflocculation?
The key difference between flocculation and deflocculation is that flocculation is the formation of flocs by the clumping of fine particles, whereas deflocculation is the dispersion of flocs to form a stable colloid. Flocculation refers to the formation of clumps from fine particles in a colloid.
What makes a good flocculant?
Polymers are useful as flocculants because they are robust molecules and sometimes carry charges. Because they are so large, small particles can get trapped in the curves of the polymer causing them to accumulate a mass heavy enough to prevent their retention in solution.
Is alum a coagulant or flocculant?
To accomplish this, the water is treated with aluminum sulfate, commonly called alum, which serves as a flocculant. Raw water often holds tiny suspended particles that are very difficult for a filter to catch. Alum causes them to clump together so that they can settle out of the water or be easily trapped by a filter.
What is the difference between flocculant and coagulant?
Depending on the charge and chemical composition of your wastewater, flocculants can either be used on their own or in combination with coagulants. Flocculants differ from coagulants in that they are often polymers, whereas coagulants are typically salts.
How does flocculation occur?
Flocculation is a two-step particle aggregation process in which a large number of small particles form a small number large flocs. Small particles usually carry negative surface charges that hinder aggregation and settling (1a). Coagulant chemicals can adsorb to the particles and balance the charges.
What is an example of flocculation?
Flocculation and coagulation treatment chemicals are used in effluent wastewater water treatment processes for solids removal, water clarification, lime softening, sludge thickening, and solids dewatering. Examples of ChemTreat coagulation products include aluminum salts, iron salts, and polyelectrolytes.
What does flocculant mean?
noun. a chemical for producing flocculation of suspended particles, as to improve the plasticity of clay for ceramic purposes.
How can flocculation be prevented?
When particles of a suspension come close together they can form aggregates called flocculates which will settle more rapidly. To prevent that we often coat the particle with a charged surfactant. The charge (Zeta potential) acts to keep the particles separate and prevent flocculation.
Why is flocculation important in suspension?
Coagulation and flocculation are important processes in water treatment with coagulation to destabilize particles through chemical reaction between coagulant and colloids, and flocculation to transport the destabilized particles that will cause collisions with floc.
What is flocculation value?
The phenomenon of the precipitation of a colloidal solution by the addition of the excess of an electrolyte is called coagulation or flocculation. The minimum concentration of an electrolyte which is required to cause the coagulation or flocculation of a sol is known as flocculation value.
Can chlorination remove impurities in water?
Chlorine will first react with inorganic impurities (dissolved iron, bromine, ammonia, etc.) before reacting with the organic compounds (dissolved organic material, bacteria, viruses, etc.). The iron precipitate, in its insoluble state, can be removed by filtration process within the water treatment centre.
What chemicals are flocculants?
A flocculants are usually organic chemicals added to wastewater to enhance flocculation, such chemicals are alum, aluminium chlorohydrate, aluminium sulphate etc.
Can you drink flocculant?
In addition, coagulants and flocculants are expensive, which is why you want to avoid adding more than are necessary to the water; drinking water treatment plants use “jar tests” to identify the optimal coagulant and flocculant concentrations. Do not drink any of your water samples—even if they appear clear.
How often can you use flocculant?
You can reuse a clarifier after 5-7 days, but if you’re constantly seeing cloudy water, there may be other problems. Adding too much flocculant can cause its own issues.
What is flocculation of soil?
Definition. Flocculation – process during which particles, for example, of a soil, dispersed in a solution contact and adhere each another, forming clusters, flocks, flakes, or clumps of a larger size. Flocculation is synonymous with agglomeration and coagulation.
Is flocculation physical or chemical?
Flocculation, in physical chemistry, separation of solid particles from a liquid to form loose aggregations or soft flakes. These flocculates are easily disrupted, being held together only by a force analogous to the surface tension of a liquid.
What is flocculation test?
A Flocculation Test Procedure is used to determine how much Flocculants need be added to solids in suspension (slurry or pulp) to cause the individual particles to collect in the form of flocs. The formation of flocs aids in improved settling rates, better overhead clarity and/or faster filtration rates.
What two chemicals are commonly used as water coagulants?
Aluminum sulfate (alum) is the most common coagulant used for water purification. Other chemicals, such as ferric sulfate or sodium aluminate, may also be used.
What happens if agitation rate in flocculation phase is too high?
Stirring too fast can break large particles apart, while stirring too slowly can prevent particles from clumping enough. A wide variety of flocculation- mixing mechanisms have been used in water treatment.
Why is coagulation and flocculation important?
Coagulation and flocculation are used to separate the suspended solids portion from the water. Suspended particles vary in source, charge, particle size, shape, and density. Coagulation and flocculation occurs in successive steps, allowing particle collision and growth of floc.
How is flocculation used in everyday life?
Flocculation: Particles that aggregate by the use of polymers that binds them together. They are typically used for treatment of wastewater containing colloids (suspended particles) and metal ions. But the phenomena are also well-known from everyday life – especially coagulation. A good example is sour milk.
Does flocculant affect pH?
Because flocculants can affect the pH level, you’ll want to start out with it at about 7.0 so you can make sure your sanitizer keeps working at maximum efficiency.
