Table of Contents
Chemicals (coagulants) are added to the water to bring the nonsettling particles together into larger, heavier masses of solids called floc. Other chemicals, such as ferric sulfate or sodium aluminate, may also be used. Coagulation is usually accomplished in two stages: rapid mixing and slow mixing.
Why are coagulants used in water treatment?
In water treatment, coagulants are used to remove a wide variety of hazardous materials from water, ranging from organic matter and pathogens, to inorganics and toxic materials, like arsenic, chemical phosphorous and fluoride.
What is the purpose of coagulation?
Coagulation is a process used to neutralise charges and form a gelatinous mass to trap (or bridge) particles thus forming a mass large enough to settle or be trapped in the filter.
How does a coagulant work?
Coagulants work by creating a chemical reaction, eliminating negative charges that cause particles to repel each other. The action of these bubbles forces clots or flocs of particles to the water surface where they can be skimmed off. Dissolved air flotation is an alternative to sedimentation.
Is FeCl3 a coagulant?
Ferric chloride (FeCl3) is the most common iron salt used to achieve coagulation. Its reactions in the coagulation process are similar to those of alum, but its relative solubility and pH range differ significantly from those of alum. Both alum and ferric chloride can be used to generate inorganic polymeric coagulants.
Is coagulation reversible?
Coagulation is irreversible, the proteins cannot be turned back into their liquid form.
What is the most used coagulant?
Iron and aluminium salts are the most widely used coagulants but salts of other metals such as titanium and zirconium have been found to be highly effective as well.
Is Lime a coagulant?
Lime (Ca(OH)2 or CaO): Lime, or calcium hydroxide, is predominantly used to adjust pH, but as a softener, it can also be used as a coagulant aid. The lime bonds with the other particles and increases the size/weight of the flocs which then increases the speed with which they settle out of the water.
What does coagulation remove?
Coagulation can successfully remove a large amount of organic compounds, including some. dissolved organic material, which is referred to as Natural Organic Matter (NOM) or Dissolved. Organic Carbon (DOC). Coagulation can also remove suspended particles, including inorganic. precipitates, such as iron.
What is coagulant made of?
The most common coagulants are salts of aluminum or trivalent iron, with aluminum being more commonly used.
How coagulants are help in treatment of water?
Coagulation treatment neutralizes the negative electrical charge on particles, which destabilizes the forces keeping colloids apart. Water treatment coagulants are comprised of positively charged molecules that, when added to the water and mixed, accomplish this charge neutralization.
What two chemicals are commonly used as water coagulants?
Aluminum sulfate (alum) is the most common coagulant used for water purification. Other chemicals, such as ferric sulfate or sodium aluminate, may also be used.
What is the most commonly used coagulant in water treatment?
Aluminum and iron salts are the most commonly used inorganic coagulants in the wastewater treatment settings. These include based aluminum metals (aluminum chloride, aluminum sulfate, sodium aluminate) and iron based metals (ferrous sulfate, ferric sulfate, ferric chloride) [13, 17, 18].
What is the coagulant?
Coagulants are a substance which cause particles in a liquid to curdle and clot together. Coagulation treatment chemicals are used in effluent water treatment processes for solids removal, water clarification, lime softening, sludge thickening, and solids dewatering.
Why alum is used as coagulant?
When alum is added to water, it reacts with the water and results in positively charged ions. Coagulation removes colloids and suspended solids from the water. These particles have a negative charge, so the positively charged coagulant chemicals neutralize them during coagulation.
What are the common coagulants used?
The commonly used metal coagulants fall into two general categories: those based on aluminum and those based on iron. The aluminum coagulants include aluminum sulfate, aluminum chloride and sodium aluminate. The iron coagulants include ferric sulfate, ferrous sulfate, ferric chloride and ferric chloride sulfate.
What is Jar test?
A laboratory procedure that simulates coagulation/flocculation with differing chemical doses. Various amounts of chemicals are added to each jar, stirred, and the settling of solids is observed. The lowest dose of chemicals that provides satisfactory settling is the dose used to treat the water.
What are the 4 steps of water treatment?
These include: (1) Collection ; (2) Screening and Straining ; (3) Chemical Addition ; (4) Coagulation and Flocculation ; (5) Sedimentation and Clarification ; (6) Filtration ; (7) Disinfection ; (8) Storage ; (9) and finally Distribution. Let’s examine these steps in more detail.
What are the characteristics of good coagulant?
There are three key properties of a coagulant :
- Trivalent cation : As indicated in the last section, the colloids most commonly found in natural waters are negatively charged, hence a cation is required to neutralize the charge.
- Nontoxic : This requirement is obvious for the production of a safe water.
How effective is coagulation?
Several studies have reported the effectiveness of dual coagulants application when dealing with various types of wastewater where it can reduce up to 90% of COD, total suspended solids (TSS), turbidity, and colour.
What is form when coagulant is added to water?
What is formed when coagulant is added to water? Explanation: When coagulant is added to water, then white gelatinous precipitate is formed called floc.
What is the principle of coagulation?
Coagulation and flocculation are related terms describing the process of preparing colloidal materials for removing by sedimentation. Coagulation is the process used to reduce the energy forces present around particles that tend to keep them from joining together to form a larger mass.
Which are two chemicals used to purify water?
Chlorine and ozone are two chemicals used to purify water.
Which coagulant is used for sewage treatment?
Alum is used in water treatment whereas Ferric Chloride is used in sewage treatment.
Why does pH affect coagulation?
Since pH values affect the surface charges and forms of the coagulants and impurities to be removed, controlling the level of pH would significantly improve the coagulation process. Therefore, not only coagulant dosage, but also pH value should be optimized to maximize the removal of impurities present in raw water.
What is the difference between flocculant and coagulant?
Depending on the charge and chemical composition of your wastewater, flocculants can either be used on their own or in combination with coagulants. Flocculants differ from coagulants in that they are often polymers, whereas coagulants are typically salts.
