Table of Contents
The Induction Motor cannot run at Synchronous speed because the Slip is never zero in an Induction Motor.
Can induction motor runs at synchronous speed?
So, theoretically, the Induction motor can never run at synchronous speed. But due to the reduction of speed, again lag influx will be achieved, and the motor will continue to move at this speed due to flux difference between rotor and stator. In short, an induction motor cannot run at induction speed.
What happens when induction motor runs above synchronous speed?
If an external mechanical system drives the rotor above synchronous speed, the induction machine acts as a generator. If the rotor is rotating below synchronous speed, the induction machine is a motor.
Why the rotor of polyphase induction motor can never attain synchronous speed?
An induction motor always runs at a speed less than synchronous speed because the rotating magnetic field which is produced in the stator will generate flux in the rotor which will make the rotor to rotate, but due to the lagging of flux current in the rotor with flux current in the stator, the rotor will never reach . May 21, 2018.
Why does a 3 phase induction motor always runs at a speed less than the synchronous speed?
An induction motor always runs at a speed less than synchronous speed. But due to the lagging of rotor flux current with respect to stator flux current, the rotor will never reach its rotating magnetic field speed i.e. the synchronous speed.
Why synchronous motors are not self starting?
Above a certain size, synchronous motors are not self-starting motors. This property is due to the inertia of the rotor; it cannot instantly follow the rotation of the magnetic field of the stator. Once the rotor nears the synchronous speed, the field winding is excited, and the motor pulls into synchronization.
What is difference between synchronous and induction motor?
Synchronous motors require an additional DC power source for energizing rotor winding. Induction motors do not require any additional power source. Synchronous motors require additional starting mechanism to initially rotate the rotor near to the synchronous speed. No starting mechanism is required in induction motors.
What is standstill rotor EMF?
When rotor is stationary i.e. s = 1, the frequency of rotor e.m.f. is the same as that of the stator supply frequency. The value of e.m.f. induced in the rotor at standstill is maximum because the relative speed between the rotor and the revolving stator flux is maximum.
What happens if fifth harmonics is given to induction motor?
It will rotates in normal operation. Either short circuit or open circuit occurs. The sinusoidal components having frequency five times of fundamental are known as fifth harmonics. Hence induction motor will rotates in reverse direction because of reverse phase sequence of fifth harmonics.
What is synchronous speed of motor?
The synchronous speed of an AC motor is determined by the frequency of the source and the number of poles. The RPM is calculated by multiplying the frequency times 60 and dividing by the number of pairs of poles. Some motors are designed to operate at synchronous speed.
What is the difference between rotor speed and synchronous speed?
Induction motor with squirrel cage rotor has two different speeds. The synchronous speed refers to the stator rotating magnetic field, which depends on the number of poles and frequency. The other speed is the rotor’s. The rotor speed will be always slower than the stator speed, we call it slip.
What is the principle of 3 phase induction motor?
The stator of an induction motor consists of a number of overlapping windings offset by an electrical angle of 120°. When the primary winding or stator is connected to a three phase alternating current supply, it establishes a rotating magnetic field which rotates at a synchronous speed.
What are the two types of induction motor?
Single-phase induction motors and three-phase induction motors are the two main types of induction motors.
What is slip speed?
The speed at which the induction motor work is known as the slip speed. The difference between the synchronous speed and the actual speed of the rotor is known as the slip speed. In other words, the slip speed shows the relative speed of the rotor concerning the speed of the field.
How synchronous motor works as a power factor correction?
The power factor of a synchronous motor is changed with a change in the excitation. When the excitation of the motor is increased, the power factor changes from lagging to unity and then to a leading power factor.
What is the need of starter for induction motor?
⇒ The starter is a device which is basically used to limit the starting current by supplying reduced voltage to the motor at the time of starting. From the expression of rotor current it can be seen that the current at start can be controlled by : By reducing the supply voltage at the time starting.
What is the main disadvantage of synchronous motors?
Disadvantages or Demerits: Synchronous motors requires dc excitation which must be supplied from external sources. Synchronous motors are inherently not self starting motors and needs some arrangement for its starting and synchronizing. The cost per kW output is generally higher than that of induction motors.
Which motors are not self starting?
Above a certain size, synchronous motors are not self-starting motors. This property is due to the inertia of the rotor; it cannot instantly follow the rotation of the magnetic field of the stator.
Why the speed of synchronous motor is constant?
Synchronous motors are constant speed motors. They run at the synchronous speed of the supply. As you can see, the synchronous speed depends on the frequency of the supply and the number of poles of the rotor. Changing the number of poles is not easy, so we do not use that method.
What is the use of synchronous motor?
Synchronous motors are normally used in applications in which a constant and precise speed is required. Typical applications of these low power motors are positioning machines. They are also used in robot actuators. Synchronous motors are also used in ball mills, watches, record players, and turntables.
What 3 things are needed for an induction motor to work?
A 3-phase induction motor includes two essential components namely the stator & the rotor. In this motor, the stationary part is the stator whereas the rotating part is the rotor. In this motor, the load is connected to the shaft. Three-phase armature winding can be wound over the stator.
Why it is called induction motor?
This type of engine is also known as an induction motor. The asynchronous motor is based on the currents induced in the rotor from the rotating magnetic field of the stator. That’s why it’s called an induction machine.
