Table of Contents
If your swamp cooler smells murky or has a damp, stale odor, it’s time to replace the cooling pads. Over time, the pad material can develop mold and mildew, which emits a fishy or “swamp”-like smell. It’s also important to thoroughly drain and clean the water reservoir and replace it with fresh water before every use.
How do I stop my swamp cooler from smelling?
Pour two or three drops of tea tree oil or grapefruit seed extract into the water in the swamp cooler. These substances will help neutralize offending odors and prohibit the formation of mold and mildew that can form within the unit. Tea tree oil is very effective but produces a strong aroma that may offend some.
How do I get rid of the fishy smell in my swamp cooler?
Since swamp cooler odors are usually caused by water, the best and cheapest thing you can do to make the water smell better is to change the water in the overflow pan regularly. Turn off your unit, then empty and replace the water. If you do this weekly, you should have almost no problem with odor.
Why does my swamp cooler smell like a fish tank?
As you know, your swamp cooler works by using water to moisten your swamp cooler pads, so that as the air moves through the wet pad, it cools down the air while also adding some humidity to your home’s dry air. Because the pads use water, this can sometimes cause them to smell over time, much like a kitchen sponge.
How do you get the rotten fish smell out of a cooler?
So how do you get rid of the fish smell and clean a cooler? After thoroughly rinsing the cooler, drop one tablespoon of liquid dish soap and a quarter to half cup of baking soda into the cooler. Add a generous spray of water and scrub using a green dish scrubbing pad.
Will vinegar clean swamp cooler pads?
Vinegar works just as well, clean pads by combining water and vinegar in a 50-50 ratio solution. Note: Use Vinegar, but the smell can soak into your cooling pads and can be very difficult to remove. Once cooling pads have been thoroughly soaked, rinse thoroughly and then set them aside to dry.
Why do pads smell like fish?
Some women report a “fishy” smell during menstruation. Unlike other common odors, fishiness usually indicates a medical problem that you need to see a doctor for. This odor is most often attributed to bacterial vaginosis, a type of infection. It’s also a lot stronger than a normal period smell.
What can I put in my cooler to not smell?
How to Get Rid of a Bad Smell in Your Cooler Step One: Rinse out the inside of the cooler using a hose. Step Two: Scrub everything down with soap and water. Step Three: Mix baking soda and water and clean the inside of the cooler. Step Four: Soak a towel in lemon juice and clean the entire inside.
How do you disinfect a swamp cooler?
Drain the water in the swamp cooler by opening the drain plug or siphoning with a hose. Brush the inside of the swamp cooler with a stiff-bristled brush or whisk broom. Use a wet/dry shop vacuum to remove the dust and dirt quickly. Pour the white vinegar into the water reservoir and allow to soak for an hour.
Can we put Dettol in cooler?
What to do if there is a bad odour coming from Air cooler? A: Best option is to drain water out completely & let the Air cooler dry for a day, but another solution is to add a 50 ml of dettol/ or any non corrosive disinfectant into water run it for 15 minutes & drain the water.
Why does my swamp cooler smell like wet dog?
If your swamp cooler smells murky or has a damp, stale odor, it’s time to replace the cooling pads. Over time, the pad material can develop mold and mildew, which emits a fishy or “swamp”-like smell. It’s also important to thoroughly drain and clean the water reservoir and replace it with fresh water before every use.
How do you remove calcium deposits from a swamp cooler?
#3 How to Remove Calcium Deposits from Swamp Cooler Pads The best cleaner is a simple mix of white vinegar and water. You should clean the water pan reservoir at the bottom of the cooling unit at least once a month throughout the season to prevent minerals from building up inside.
Why does my swamp cooler smell like it’s burning?
A burning smell coming from a cooling system can be just the smell of the new filter pads and should dissipate after a second cycle. However electrical, plastic or a strong rubber burning smell while cooler is ON is an obvious sign of serious electrical issue related to the fan motor, main control board or a capacitor.
How do you disinfect a cooler?
How to Clean a Cooler Mix. Pour 1/3 cup of Clorox® Disinfecting Bleach with CLOROMAX® into 1 gallon of water in a plastic bucket or container. Scrub. Apply bleach solution and a sponge on vertical surfaces. Wait. Wait 6 minutes for disinfecting. Rinse. Rinse thoroughly using a garden hose with a spray nozzle.
How do you clean a swamp cooler pad?
Clean Your Cooling Pads If your cooling pads are intact and show no signs of mold or mildew, you can clean them instead of replacing them. To do this, remove the pad and use a vacuum cleaner to remove loose debris. Then place the pads on the ground outside and hose them off with clean water.
How often should I replace my swamp cooler pads?
Cleaning your pads annually helps manage mineral buildup, makes the pads last longer, removes foreign matter (like cottonwood seeds) and improves efficiency. For Mastercool swamp coolers, you should clean the pads annually and replace them every 3-5 years.
Can you put essential oils in swamp cooler?
Add essential oils to the swamp cooler to eliminate odors. Swamp coolers can have musty smells. Mixing 15 drops of a scented essential oil, like lemon, lavender, or peppermint, or a mixture of essential oils can help make the swamp cooler smell better. Mix the essential oils with vinegar and place it in a spray bottle.
