Table of Contents
Heater Not Blowing Warm Air Because of Thermostat Settings. Make sure you check the thermostat which controls your HVAC system. If your thermostat is set correctly and your heater is still not coming on, you may have a faulty thermostat. If these fixes do not work, a call to an HVAC professional is in order.
Why is my furnace running but not blowing hot air?
Make sure that airflow into your furnace is not blocked or limited. If the furnace heats up just fine but continuously blows even when it is not putting out warm air there can be a problem with your limit switch. If your furnace does not heat up enough you might have an ignition or pilot issue.
Why is cold air coming out when heat is on?
When your furnace blows cold air, try turning the heating unit off and on. If the air feels warm for a moment or two, then switches to cold, it may be that the flame sensor is dirty. With a dirty flame sensor, your gas burner won’t stay lit, causing the air to go cold soon after the furnace turns on.
What do I do if my heater is blowing cold air?
How To Troubleshoot Furnace Blowing Cold Air Step 1: Check Thermostat Setting. First and most importantly, make sure your thermostat is set to Heating Mode. Step 2: Evaluate and Adjust Your Vents: Step 3: Assess Furnace Filters and Replace Filters If They Are Dirty. Step 4: Call An HVAC Pro.
Why is no air coming out of my vents?
The most common cause of low air flow through the vents in your home is blocked or dirty AC filters. When you clean or change your AC filters, be sure to vacuum the metal grates closing the filters in at the same time. Another way to prevent common home cooling problems is to clean your AC registers on a regular basis.
What would cause a furnace not to kick on?
The Pilot Light (Faulty Ignition Sensor) The pilot light or ignition sensor is usually the most common issue when your furnace will not ignite. This is typically the problem if you can hear your furnace click on but it does not fire up. If the sensor or ignitor is dirty, it will need to be cleaned.
How do I get my heat to kick on?
Pilot Light You can try lighting the pilot. If it stays lit, your furnace will kick on. If it does not, there could be a problem with the assembly or the sensor, and a professional would need to come in and fix it. Having your furnace stop working can be very stressful, especially when it is cold outside.
How do you manually reset a furnace?
Follow these simple steps: First, turn off the power supply to the furnace by turning off the breaker in the circuit box. Locate the reset button on the furnace and press it to reset the furnace. If the button is popped up, press it down. Return the cover to the blower compartment and turn the power on.
How do I know if my thermostat is bad?
7 Signs You Need to Replace Your Thermostat Your HVAC Keeps Turning On or Off. Faulty Thermostat Readings. Suspiciously High Energy Bills. Constant Temperature Shifts. Thermostat Is Too Old. Thermostat Fails to Respond to Changed Settings. Your HVAC System Short Cycles.
Why is my heat not turning on in my house?
Dirty and clogged filters are one of the primary causes of furnace problems and can cause high operating costs. The heat exchanger can overheat and shut off quickly when filters are clogged with dust and dirt. The next step is to replace the filter if the blower is running but no heat is coming out.
How long does it take for furnace to reset?
Either way, restarting a furnace is a relatively simple task that takes no longer than 10 minutes to complete. Follow these steps to reset your gas furnace: Turn the circuit breaker off and switch the furnace power button off too. Never touch the breaker with wet hands and use only one hand to do it.
Where is the reset button?
Alternatively referred to as the reset switch, the reset button allows devices that utilize it, such as a computer or peripheral to be rebooted. Usually, the button is on the front of the device, next to or near the power button.
Do all furnace blower motors have a reset button?
All furnaces are equipped with a reset button. They are generally red or yellow and are located inside the blower compartment. The reset button is a safety feature that will shut down the furnace when a problem is detected, often a hot or overheating furnace, before it trips the circuit breaker.
How do you tell if you need a new thermostat in your house?
Signs You Need a New Thermostat Heating or cooling system will not turn off or on. The temperature reading is incorrect. Recent spike in your energy bill. Frequent temperature fluctuations. Thermostat is 10 years old or older.
How do I test my home thermostat?
How to Test an Old Thermostat Step 1: Turn off HVAC power. This can be done by switching the furnace to the off position if your system has an on/off switch. Step 2: Remove thermostat cover. Step 3: Remove wires from terminals. Step 4: Turn the HVAC power back on. Step 5: Test other wires.
