Table of Contents
If your machine turns off automatically again, unplug your machine and remove the nozzle. Hold the tab on the brush roll and spin the other end. Check the drive gear where the brush roll goes into the foot of the machine and remove any debris that may be wrapped in that area. Reinstall the brush roll and the nozzle.
How do you reset a Bissell CrossWave?
Here is how to restore Bissell CrossWave Max to factory settings: Click on the Hamburger menu button on the top left of the screen. Click on your Bissell CrossWave Max. Tap the gear in the top right corner of the screen. Choose the “Factory Reset” Button. Click on the red “Reset machine” button.
Why does my Bissell CrossWave keep beeping?
If a Bissell CrossWave robot detects a problem, it will stop, produce a beeping sound, and the button light will flash or produce a solid light. Turn the robot OFF and remove hair and debris from the wheels.
What does 2 red lights mean on Bissell CrossWave?
The two blinking red lights is a known issue, call Bissell and they will replace. The issue is a design flaw where the unit gets damaged if left on the charging station for a long period of time.
Why is my Bissell CrossWave Cordless not working?
Another reason you don’t have power could be because the handle isn’t inserted properly into the body of the CrossWave®. Push down on the handle. When properly inserted, it should “click’ into place. Remove the handle and re-insert into the body, push down until you hear a “click.”.
How long is BISSELL warranty?
BISSELL are committed to ensuring that all products are to the highest standard. All our products have a minimum one year’s manufacturer guarantee from the date of purchase and should you experience a problem within this period please contact the BISSELL Consumer Care line on 0344 888 66 44 – Option 1.
Do I have to clean my Bissell CrossWave after every use?
Depending on your usage level, a routine clean may be necessary after using your Bissell Crosswave. Most routine mopping use on a regular kitchen or floor or use as a vacuum on averagely dirty rugs and carpet will not make your Crosswave extremely dirty.
How do I know if my Bissell CrossWave is working?
To check the battery status, remove the Bissell CrossWave from the charging base and turn the machine on. You will know when the battery is fully charged when all three white status lights are illuminated. If you have tried everything, you may need to perform a factory reset.
Why does my Bissell CrossWave leak water?
If machine is leaking from the side vents: There may be too much foam building up within – be sure to use the recommended amount of formula as indicated on the clean tank. Also be sure to use the proper CrossWave formula (not portable or upright cleaning formulas).
Why does my Bissell Bolt keeps turning off?
Your brush will automatically shutoff if it is bound by too much hair. A blinking red light will indicate this. Turn over of the foot of the machine to expose the brush roll. Place the brush roll back into the foot, then secure it into place by locking the tab.
What does orange light on CrossWave mean?
Dirty Water Tank, Filter, & Float Indicator Maintenance. Note: If orange dirty water tank indication light is illuminated, but the dirty water tank is not full, follow the steps below: Turn off machine and remove from docking station. Remove dirty water tank by pressing down on recessed button on top of tank.
Can you replace battery in Bissell CrossWave?
A: Hi Patti – the battery can be replaced at a BISSELL Authorized Service Center if necessary and is covered under the manufacturer warranty. We don’t offer a replacement battery consumers can purchase and install themselves.
Do you hold trigger on Bissell CrossWave?
CrossWave is the best way to clean sealed hard floors. Then hold your CrossWave over the stubborn mess while holding the spray trigger. Using short passes while holding down the trigger, the multi surface brush will go to work.
How do I connect my Bissell CrossWave to WiFi?
Pairing Steps: Step 1: Download the BISSELL Connect app from Apple app store or Google Play store. Step 2: Connect CrossWave Cordless Max to BISSELL Connect. Step 3: Connecting the product to WiFi. Step 4: Setting-up the CrossWave. Step 5: Update Available – Firmware.
How can I tell if my CrossWave is charging?
Make sure your CrossWave® is fully charged before first use. To check the status, remove it from the charging base and turn the machine ON. You’ll know the battery is fully charged when all three white status lights are illuminated.
Why is my Bissell vacuum not charging?
Cordless Bissell vacuum cleaners might have no power due to a dead battery, a faulty charging station, or a non-operative wall outlet.
What does the BISSELL CrossWave warranty cover?
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product BISSELL will repair or replace (with new, refurbished, lightly used, or remanufactured components or products), at BISSELL’s option, free of charge from the date of purchase by the original purchaser, for two years any defective or.
What is BISSELL CrossWave warranty?
2-Year limited warranty, may vary by state. Visit support.BISSELL.com or call 1-844-383-2630 for complete warranty information.
Does my BISSELL vacuum have a reset button?
If your vacuum becomes clogged, the vacuum is equipped with a brush shut off to prevent damage from occurring. Locate the brush reset button on the lower back right of the vacuum. Press the button to reset the brushroll To ensure the brush has been reset, plug the vacuum back into the electrical outlet.
Can you put Bissell CrossWave brush in washing machine?
Grab the front of the brush roll window and pull up to remove. Pull up on the white brush roll tab to remove. Both the brush roll and brush roll window can be rinsed under warm water to clean. Once dry, put the brush roll back into your machine by inserting the right side in first.
How long does Bissell CrossWave brush last?
Works in the BISSELL® CrossWave®, CrossWave® PET PRO, and CrossWave® Cordless. Easy-to-Clean and easy-to-replace brush roll. We recommend replacing your Brush Roll every 6 months for best cleaning results.
