Table of Contents
What is Wedging? Wedging prepares the clay for optimal use. Wedging makes the clay more pliable, ensures a uniform consistency, and removes air pockets as well as small hard spots in the clay before you use or reuse the clay for a project.
What happens if I don’t wedge my clay?
There are usually no air bubbles in it! In fact, improper wedging will more often add bubbles and you’ll just dry out your clay in the process. Simply make sure the pieces get enough drying time and have no plaster mixed in with the clay- that IS a sure recipe for explosions.
Does all clay have to be wedged?
NOTE: Keep in mind you will only need to wedge thoroughly for recycled clay or mixing mason satins or other colorants into your clay. Fresh Clay right out of the bag only needs to be wedged 30 to 40 times and the stack and slam about 10 to 15 slices.
What are the 4 reasons for wedging clay?
Wedging prepares the clay for optimal use. Wedging makes the clay more pliable, ensures a uniform consistency, and removes air pockets as well as small hard spots in the clay before you use or reuse the clay for a project.
How can I reuse old Clay?
Reusing Dry Clay Step 1: Get Water! Fill up a bowl of water that will be big enough to store your dry clay into. Step 2: Put Your Dry Clay in It. Place your dry clay into the water. Step 3: PASTE! Step 4: Drain. Step 5: WAIT EVEN LONGER. Step 6: FINALLY.
What are the six stages of clay?
There are 6 essential stages of clay: 1. ) Slip. Slip is clay with added water to make it into a paste or liquid. 2.) Wet clay. Wet clay is used by many potters to produce their work. 3.) Leather-hard clay. 4.) Dry clay. 5.) Bisque. 6.) Glaze ware.
Do you wedge clay before Handbuilding?
If you’re throwing, no matter what, it’s a good idea to wedge the clay so no air pockets are trapped. Hand building is a bit more forgiving since your manipulation of the clay will allow you to see/feel and air pockets. Trapped air = explosions in the kiln and potentially loosing an entire kiln load.
What is the first firing of clay called?
Biscuit (or bisque) refers to the clay after the object is shaped to the desired form and fired in the kiln for the first time, known as “bisque fired” or “biscuit fired”. This firing changes the clay body in several ways.
What do you call it when you roll out a large even piece of clay?
coil. a rolled out piece of clay is called a. needle tool.
What should I wedge my clay on?
Every potter needs a surface to wedge clay on, and there are many different types. The most common are plaster, plaster covered in canvas, and plywood covered in canvas. Other possibilities are concrete, granite, masonite, concrete board and hardibacker board. The simplest wedging surface is a piece of canvas.
What is the best surface to use clay on?
Polymer clay is naturally sticky and tends to stick to your tools as you use them. When cutting pieces or shapes from a sheet or slab of polymer clay, the best way to keep the clay from sticking in the cutters is to use a work surface that the clay sticks to. A glossy ceramic tile or a glass work surface is perfect.
What is clay that has not been fired called?
Greenware This refers to ceramic ware that has not been fired. Bisque The term bisque refers to ceramic ware that has been fired once without glaze. Glaze A glass-like surface coating for ceramics that is used to decorate and seal the pores of the fired clay.
Can I wedge clay on wood?
If wood is your clay wedging surface of choice, an old heavy wooden table is also a good option. Unvarnished wood has enough grip to make a great wedging surface. And it is nicely absorbent, without drawing too much moisture from your clay.
What is score in clay?
To score a pot or piece of clay means to scratch hatch marks on it as part of joining clay pieces together. This is done before brushing on slurry and joining the pieces together. The process is often called “score and slip.” For example, you may say, “I scored and slipped the pitcher before joining its handle to it.”Nov 13, 2019
What are the 5 stages of clay?
Terms in this set (5) slip. a mixture of clay and water, the consistency of pudding. wet/plastic clay. new clay from the bag, very workable. leather hard. the clay has lost most moisture, but you can still carve into it. bone dry or greenware. totally dry clay, all moisture is gone, ready to fire. bisque.
What is clay slip made of?
Slip consists of clay particles suspended in water. Its consistency will vary according to use, ranging from thick cream to butter milk. It can be used to bond pieces of clay together, to decorate and protect pottery or it can be poured into a mold and used to cast objects.
How do you wedge a large amount of clay?
If you’re throwing large pots, try using softer clay and throw it dry (or with less water) to avoid degenerating it to mush. Wedge using the weight and strength of your whole body on a wedging table of the proper height. Ideally, the table height should be equal to the distance between fingertips and floor (figure 1).
Is there a machine that wedges clay?
A Pugmill is a machine with a horizontal chamber that loads on the top. The chamber is a metal cylinder with an auger inside. An auger looks like a large screw. It turns and wedges the clay, discharging the wedged clay at the other end.
What are the 2 ways of wedging?
So it’s important to learn how to wedge clay properly. There are various different ways to wedge clay— ram’s head, spiral wedging, and wire wedging to name a few.
What surface does clay not stick to?
Most air dry clays are sticky, and you don’t want that on your work surface. We recommend protecting the work area with items such as wax paper, silicone baking mats, or vinyl placemats. This will keep your table protected and make clean up much easier!Mar 8, 2018
