Table of Contents
The metal strip on a wooden ruler is there so that you can draw a crisp, straight line. Aluminum rulers have an embedded metal strip, or drawing edge on one side to prevent smearing. Most plastic rulers are not recommended for use with felt-tip markers and should only be used with pencil or pen.
What is the metal strip on a ruler called?
A tape measure or measuring tape is a flexible ruler used to measure size or distance. It consists of a ribbon of cloth, plastic, fibre glass, or metal strip with linear measurement markings. It is a common measuring tool.
Why is there a gap on rulers?
except for machinist scales, most rulers start with a small gap before measurement marks. The main reason for this is that the end can suffer some dammage and not affect the markings.
Why do rulers have cork on them?
The cork backing helps keep the ruler from slipping on glass or polished surfaces and prevents ink from bleeding under the ruler.
Are metal rulers better than plastic?
Steel Rulers, The Most Durable Of Rulers Steel rulers, unlike wooden or plastic rulers which are often not as durable and probably will not last as long as their steel alternatives, are very durable and are resilient to wear, tear and general damage.
What is the end of a ruler called?
A ruler or measuring tape can be used to measure lengths in both metric and customary units. Here, the ruler is marked in centimeters (cms) along the top and in inches along the bottom. The marks or intervals on a ruler are called hash marks.
What is a steel ruler used for?
Steel rules come in rigid and flexible versions. While their primary purpose is accurate measurement, they can also be used as guides for laying out lines, and if rigid enough, for cutting. The thinner, more flexible rules can also be used to measure rounded or cambered work.
Are metal rulers accurate?
Pen Steel Rulers. Made of high-impact stainless steel, these rulers are built to last, and the straight edge won’t wear down. Etched with both inch and centimeter markings, these rulers provide accurate measurements down to the 64th of an inch and the 20th of a centimeter.
When might be a metal ruler be more suitable?
Metal is used for more durable rulers for use in the workshop; sometimes a metal edge is embedded into a wooden desk ruler to preserve the edge when used for straight-line cutting. 12 in or 30 cm in length is useful for a ruler to be kept on a desk to help in drawing.
Do you start at the 0 on a ruler?
You start at 0 inches or 0 cm. If you start at 1, you’ll always be off in your measurement by 1.
Do you start at the first tick on a ruler?
If you have doubts, start counting the tick marks between the 1 and the 2 (for inches). If you get higher than 8, your ruler goes by 16th’s! Now you’re ready to measure. Write down the measurement on a pad of paper so you don’t forget it!Jan 9, 2018.
Does 0 count on a ruler?
If you are measuring something, align it with the left side of the zero mark on the ruler. The left side of the line where the object ends will be its measurement in inches.
What are the advantages and disadvantages of a ruler?
A well-made rule can also double as a straight edge for determining flaws or errors in other parts or tools. A major disadvantage of a rule is that it is not a good tool for measuring larger objects or distances that are greater than about a yard or meter.
Why are rulers made of metal?
The metal strip on a wooden ruler is there so that you can draw a crisp, straight line. In addition, the metal strip will stop a felt-tip marker from smearing on paper. Aluminum rulers have an embedded metal strip, or drawing edge on one side to prevent smearing.
Why are metal rulers inaccurate in hot and cold temperatures?
Measuring length with a metal ruler will give a different result at a cold temperature than at a hot temperature, due to thermal expansion of the material. An improperly calibrated thermometer may give accurate readings within a certain temperature range, but become inaccurate at higher or lower temperatures.
Why are rulers called rulers?
c. 1200, “to control, guide, direct, make conform to a pattern,” from Old French riuler “impose rule,” from Latin regulare “to control by rule, direct,” from Latin regula “rule, straight piece of wood,” from PIE root. The meaning “mark with parallel straight lines” (with or as with the aid of a ruler) is from 1590s.
How are rulers calibrated?
Calibration of Steel Rulers The calibrated ruler should be placed onto a first-class leveling ruler, or a leveling plane of the relevant standard, and calibrated over the whole length range, by use of a relevant first-class plug gauge. If the gauge can pass, the calibrated ruler is not up to standard.
Are all rulers the same?
In the United States, most rulers have the imperial measurements along one long edge while the other long edge shows the metric measurements. A standard ruler is 12-inches long and 30 centimeters in length. It is likely your ruler will state “inches” or “cm” to make it easier to tell which side is which.
What is a metal ruler made of?
The material that a steel rule is made of is also important to the quality. Good steel rules are made from high-carbon spring steel that is hardened and tempered to Rc 47-52. They are chrome plated, usually with a satin finish, for corrosion resistance and readability.
What are metal rulers made out of?
Good quality steel rules will usually be made from high-carbon steel, which has been tempered and hardened. They will often be chrome plated, for corrosion resistance, and have a satin finish, to make them easier to read.
Do steel rulers need to be calibrated?
With regards to the simple steel ruler (or any other measuring equipment), if you are using it to measure or monitor product or process quality then it needs to be calibrated.
