Table of Contents
The light could be a minor issue, such as a faulty gas cap, or it could mean something more serious, such as a misfiring engine. If the light begins flashing, however, it indicates a more serious problem, such as a misfire that can quickly overheat the catalytic converter.
What is the most common reason for check engine light?
Replacing a faulty oxygen sensor — a sensor used to optimize a vehicle’s fuel-to-air mixture to increase gas mileage and reduce emissions — is the most common cause for a check engine light.
Is it safe to drive with check engine light on?
Can you drive a car with the engine light on? It’s okay to drive for a few miles, but be sure to schedule an inspection of the engine as soon as possible. If the check engine light comes on while you’re driving, don’t panic! Just be sure to have your car inspected as soon as possible after the light turns on.
When should I be worried about check engine light?
Unlike a Temperature or Oil Pressure light, a Check Engine light is usually not an urgent, “Stop right now or you may cause permanent damage!” type of situation, unless it is flashing. If your gas cap is loose or the seal is not tight, the vapor leakage can cause your fuel system to trigger the check engine light.
What do you do when the check engine light comes on?
If the check engine light comes on, here are some tips on what you should do: Look for a serious problem that requires immediate attention. Try tightening your gas cap. Reduce speed and load. Use built-in diagnostic services, if available.
What does a solid check engine light mean?
A solid Check Engine Light can mean something like a loose gas cap, or it can indicate a more in-depth problem like a fuel, timing, or transmission issue. Get your car diagnosed, although the urgency isn’t the same as if the light was flashing at you.
What does a solid yellow check engine light mean?
The steady yellow light is telling you to take a look and fix the minor issue as soon as you can, but it’s not usually serious. The flashing light means that your vehicle’s engine is misfiring and you should investigate the problem immediately.
Can AutoZone check engine light?
Does AutoZone Scan Check Engine Lights? AutoZone can diagnose Check Engine Light codes, yes. If your engine light turned on and you are wondering why, head down to your local AutoZone where one of our store associates can help diagnose the issue through our free Fix Finder service.
How much does it cost to get engine light checked?
There’s a lot that goes on inside your engine, and rooting out the problem and fixing it can be a costly proposition. How costly? On average, the fee to have an auto mechanic diagnose a check engine light is $100.
Will check engine light reset itself?
Your car’s check engine light will reset itself after you repair the problem in most car models. But it may take some time. A car usually needs 10-20 successful cycles before it will reset the check engine light by itself. Therefore it’s much easier to reset the check engine light with an OBD2 scanner.
Who can diagnose a check engine light?
Solving check engine light problems Take your car to a mechanic and pay a diagnostic fee. Often, the fee is waived if you agree to have the necessary service performed at that garage. Bring your car to an auto parts store and have the code read for free. Buy an inexpensive scanner and read the code yourself.
Will a dealership buy my car if the check engine light is on?
Most dealerships will use the check engine light malfunction as an excuse to pay you less than the car may be worth. Be ready for a very low offer for the trade in. Your research will show the dealer you will not be taken advantage of.
Can needing an oil change cause check engine light to come on?
An illuminated check engine light is the first warning sign that your vehicle needs an oil change. It can activate because the oil is too dirty or when there’s not enough flowing throughout the engine. If it’s dark, black in color, or too low, schedule an oil change today.
Can Autozone reset check engine light?
Wondering if the local Autozone can turn off a check engine light? The answer is yes, but… there are a couple things to remember: Local auto parts stores will typically offer to read your codes for free, but not all locations will clear the light due to liability issues.
How long does a check engine light take to reset?
The Light Stays On You may think that there is still a problem with the car after the repair, but it’s because the light needs time to reset. The car’s internal computer only resets after a set period where it checks all of its sensors once more. The reset can happen automatically after around 10 to 20 cycles.
What should you not say to a car salesman?
10 Things You Should Never Say to a Car Salesman “I really love this car” “I don’t know that much about cars” “My trade-in is outside” “I don’t want to get taken to the cleaners” “My credit isn’t that good” “I’m paying cash” “I need to buy a car today” “I need a monthly payment under $350”.
How much does it cost to reset check engine light?
The national average repair cost linked to a car or truck’s check engine light now stands at $357, including parts ($216) and labor ($141).
How long does check engine light stay on after replacing gas cap?
How long does it take for the check engine light to go off after replacing gas cap? As soon as it’s safe, pull over and make sure your gas cap is tight. Once you’re back on the road, your check engine light should go off within 10 or 20 miles.
