Table of Contents
The property owner is responsible for abutting sidewalk, driveway apron and/or curb maintenance and replacement. Property owners must complete a Street Excavation and Occupancy Permit prior to replacing sidewalk, driveway apron, or curb abutting their property.
Do you own your driveway apron?
Homeowners may be surprised to find they don’t own the apron portion of their driveway yet are responsible for maintaining it. In winter, the homeowner may also be responsible for removing snow from both the sidewalk and the driveway apron.
What part of the driveway is the apron?
What is a driveway apron? It’s the area where your residential driveway meets the street pavement. You can transform that plain patch of tarmac by tearing up the section above the curb and replacing it with materials that look like they were taken from the streets of Brussels itself.
What is the purpose of a driveway apron?
Driveway Apron means that portion of a regularly established driveway lying between a property line and any curb, the purpose of which is to provide vehicular access from the street across the curb, parkway and sidewalk to the property fronting thereon or abutting thereto.
How do you fix an apron driveway?
Follow these steps: Snap a chalk line parallel to the garage door. Cut through the asphalt (it’s usually 2 to 3 in. Remove the asphalt and dig a 12-in. Spread a 2-in. Install paver edging along grass edges and spread a 1-in. Set your pavers, compact them with the plate compactor and fill the joints with sand.
How much does an asphalt apron cost?
An asphalt apron typically costs $2-$5 a square foot, or $360-$900 for a 12’x15′ apron. However, there’s a basic cost for bringing equipment and a crew to the site, so may be a minimum charge of $500-$1,000 or more for small projects. A stamped asphalt apron can cost $5-$12 a square foot, or $900-$2,160 for 12’x15′.
Can you widen driveway apron?
Q: Can I widen my existing driveway? A: The private portion of an existing paved driveway can be widened, without a permit, up to the paving area limits described in Chapter 6.64 of the County Code.
What is the purpose of a garage apron?
What is a Concrete Garage Apron? The concrete garage apron is the concrete slab in front of the garage door and is used to transition the concrete or asphalt driveway onto the garage concrete floor.
What is a concrete apron?
A concrete apron, also known as “an approach,” is a section of concrete inserted in one of three places: In front of a garage. Around the perimeter of a building. The entrance to a parking lot or driveway.
What is an apron in construction?
An apron is a raised section of ornamental stonework below a window ledge, stone tablet, or monument.
What is a driveway approach?
DEFINITIONS AND DIMENSIONS: DRIVEWAY APPROACH: AREA OF A DRIVEWAY LYING IN THE PUBLIC RIGHT OF WAY BETWEEN THE STREET FLOW LINE AND THE PROPERTY LINE, INCLUDING THE APRON, SIDE SLOPES AND CURB RETURNS WITH SPANDRELS.
What is asphalt driveway?
What Is an Asphalt Driveway? Asphalt driveway material is similar to what you see road crews laying on roads. Also called hot mix or hot mix asphalt, this type of driveway is an aggregate of stone and sand, along with a slurry of asphalt, a tar-like material made from petroleum.
What is a asphalt apron?
Asphalt Settlement A driveway apron is an area that connects and provides a smooth transition from the street to the driveway, and from the driveway to the garage. And if your apron starts to sink, it will not only detract from your property’s curb appeal, it can also pose serious danger.
What is a sunken apron?
When the entry to your garage at the top of your driveway begins to sink and become depressed, this problem is known as a sunken apron. Once your garage apron begins to sink, this will continue to cause further deterioration in the adjacent pavement, especially at its edges.
How do I fix my garage apron?
How to repair garage floor concrete damage near apron? Use quick-setting cement plus bonding adhesive to repair the large voids from the broken/missing concrete. Fill the crack to a reasonable depth with sand/backer rod and then apply a self-leveling caulking or concrete crack filler.
What are the parts of a driveway?
The component parts of the driveway approach are termed the apron, the end slopes or the curb return, and the sidewalk section.
How do you make a gravel driveway?
How to Make a Gravel Driveway STEP 1: Stake out the path of the driveway. STEP 2: Clear grass or topsoil from staked area. STEP 3: Calculate cubic yardage of gravel needed for each driveway layer. STEP 4: Schedule and prepare site for gravel delivery. STEP 5: Level the ground along the path of the driveway.
How do I fix my birdbath on my driveway?
If your asphalt birdbath is fairly shallow, you can repair it yourself by using crushed rock to fill the depression and covering the rock with asphalt emulsion, which usually is sold in 5-gallon buckets at home supply stores.
Can I build on a shared driveway?
Answer: Check your title deeds and those of your neighbour to establish the boundaries of your property and how the driveway is owned. You could each own half of it, or one of you could own the whole of it. Either way, as the driveway is shared you will each have been granted certain rights of access over it.
Can I widen my driveway entrance UK?
Widening Your Driveway In the most part, a drive widening projectin in itself will not require planning permission. However if the widening project involves demolishing part or even all of a boundary fence or wall fronting a highway then this will require planning permission.
