For example, clawfoot and cast iron tubs are great sources of scrap metal and companies will potentially pay you more for your bathtub depending on the materials you have on hand. So before you resell your old bathtub, understand the maximum value you have on hand.
What can I do with a cast iron tub?
The tub can be used as a planter, outdoor furniture, indoor furniture and many other transformations. Turn it into a planter in your garden. Transform it into an outdoor sofa. Transform it into a chaise lounge. Turn it into a couch. Upcycle it into a chair. Transform it into a coffee table and planter.
How much does an antique cast iron tub cost?
Hidden Costs of Clawfoot Tubs Vintage Cast-Iron Clawfoot Tub New Acrylic Clawfoot Tub Installation $1,100 $500 Refinishing $600 N/A Moving $100 N/A – Delivery included with tub purchase Total $2,850 $2,250.
How heavy is a cast iron bathtub?
How heavy is a cast iron tub? Depending on its size, an iron tub can easily weigh 350-500 pounds or more when empty.
What is the price of a cast iron tub?
Cast Iron – $500-$2,000 The average cost for a 60-inch standard cast iron tub ranges from $500 to $2,000, not including installation.
How do I know if my tub is steel or cast iron?
1) Remove the overflow cover and popup lever from the head end of the tub and look at the edge of the hole. You should see black cast iron or bright steel. Also, if you remove the overflow cover, the material between it and the plumbing will be about 1/4 ” thick if it is cast iron. 1/16″ if it is steel.
How much does it cost to have a cast iron tub refinish?
How much does it cost to refinish a cast iron tub? For an average cost of $350 to $500—a fraction of the $1,200 to $5,000 expense of a new cast-iron or steel tub installed—refinishers can make an antique fixture look brand new.
How much do old cast iron tubs weigh?
Cast iron bathtubs typically weigh between 240 and 500 pounds; however, the actual weight depends on the size and type of bathtub. What is this? Alcove cast iron bathtubs are usually 60 inches long, hold 32 gallons of water, and weigh 320 pounds on average.
How do you date a cast iron tub?
Next to the manufacturer’s name or the “Made in U.S.A.” logo, you often find the date of manufacture in the month/year format. For example, the numbers 12 31 state the manufacture date as December 1931. You might also see another number, such as 5 1/2. This number states the length of the tub in feet.
How much can you sell a clawfoot tub for?
The cost increases for any tubs smaller or larger than 5′ or for any tub that is unusual in any way – a wide, flat rim, a slipper-style tub, ornate feet, etc. A 5′ roll rim tub may sell for $50 while a 5′ French double-ended clawfoot tub may sell for $2000.
What are old claw foot tubs worth?
Interestingly, most antique clawfoot tubs that you can find for sale have already been refurbished, and so they’re a little more expensive than an untouched tub is going to be. For example, a restored 5′ clawfoot tub was sold for $1,000, and a refinished 6′ clawfoot tub from 1926 sold for about $2,500.
Are cast iron tubs recyclable?
No problem. Cast iron is totally recyclable. Since iron is the main component of steel, you should refrain from throwing it away. Your used cast iron appliances can be melted down and crafted into something brand new, and you can even get money for it!.
Do cast iron tubs rust?
Rust is only a factor on pressed steel enamel and cast iron tubs. Rust does not occur on plastic and fiberglass bathtubs. When steel and cast iron tubs are manufactured, they are coated with a veneer of porcelain. With the inevitable exposure to water, the iron or steel will eventually rust.
Is cast iron or acrylic tub better?
Cast iron tubs are extremely durable and require less upkeep than an acrylic tub to keep them in good shape. They should be cleaned weekly using a mixture of soap and water and a soft sponge or cloth. Acrylic tubs are very durable, but more prone to staining over time.
How deep is a cast iron tub?
American-Standard: 66″ Spectra cast iron tub is 11″ deep.
How much does a cast iron clawfoot tub cost?
Costs vary depending on the tub material, size, and style. The national average cost range is $2,300 to $4,100 for an installed clawfoot tub. Most homeowners pay $2,850 for an installed cast iron, roll top tub.
Can you paint a cast iron tub?
Painting over a cast iron tub can give new life and style to any bathroom. Whether the bathtub is rusted and peeling or simply in need of a refresh, it’s important to plan each step in the process.
How do I find the manufacturer of my bathtub?
For soaking baths, whirlpools, and air baths (BubbleMassage™), the model number with manufacturing date or the serial number are the best methods for identifying the product. The model number and serial number are printed on a white or silver label.
How long does a cast iron bathtub last?
While porcelain-enameled cast iron is expensive and heavier than steel or acrylic, a good cast-iron tub could last as long as you do: a good 70 years or more! A cast iron tub can be a thing of beauty.
If you have a cast iron sink or tub, it may very well be worth scrapping, especially if you can’t find some way of selling it to someone else. While you can find ways to repurpose a cast iron sink or tub, you may also need to get rid of it from your home.
What is the price of a cast iron tub?
Cast Iron – $500-$2,000 The average cost for a 60-inch standard cast iron tub ranges from $500 to $2,000, not including installation.
How much do old cast iron tubs weigh?
Cast iron bathtubs typically weigh between 240 and 500 pounds; however, the actual weight depends on the size and type of bathtub. Alcove cast iron bathtubs are usually 60 inches long, hold 32 gallons of water, and weigh 320 pounds on average.
Is there scrap value in cast iron?
Cast Iron Scrap Price The prices offered by scrap yards for cast Iron scrap are usually very low. The prices are dependent on the quality of the metals and their source. A cast iron in relatively good condition can fetch better prices than cast iron that is old, rusted and worn out.
Does anyone buy cast iron tubs?
For example, clawfoot and cast iron tubs are great sources of scrap metal and companies will potentially pay you more for your bathtub depending on the materials you have on hand.
How do you destroy a cast iron tub?
Break the tub apart with a sledgehammer if you don’t want to keep or sell it. Start by covering the cast iron with a heavy blanket or towel. Put on some goggles and a long-sleeve shirt and use a 16 lb (7.3 kg) sledgehammer to break the tub apart until it’s in smaller pieces.
What will cut a cast iron tub?
The side-grinder with a 4.5” diamond blade is the only tool used when cutting a cast-iron tub.
How hard is it to remove a cast iron tub?
Cast iron tubs can weigh over 300lbs easily depending on the size, shape, and wall thickness, which makes them very difficult to remove.
Which is better cast iron or acrylic tub?
Cast iron tubs are extremely durable and require less upkeep than an acrylic tub to keep them in good shape. They should be cleaned weekly using a mixture of soap and water and a soft sponge or cloth. Acrylic tubs are very durable, but more prone to staining over time.
How much does a standard bathtub cost?
A standard bathtub/shower combination averages $300 to $2,000 for materials. For a freestanding tub, material costs range from $600 to $20,000, depending on the material the tub is made from.
How much does a claw foot cast iron bathtub weigh?
Bathtubs of all kinds are heavy. A clawfoot tub can be made from acrylic, but a classic clawfoot tub is made of cast iron with a porcelain finish. An empty cast iron tub can weigh between 200 and 400 pounds. Add water and the weight on the floor will increase to between 500 and 900 pounds.
How heavy is a cast iron clawfoot tub?
All bathtubs are heavy, but clawfoot tubs tend to be especially heavy – particularly the cast-iron models. A cast-iron tub can easily weight 200-400 pounds while empty – fill it with water and climb in and you’re looking at several hundred pounds of weight.
How do I know if my floor can handle a cast iron tub?
In general, unless there is something wrong with the joist spacing or the wood has rotted, the framing in most houses should be able to support a standard size cast iron tub with no problem. A standard size is approximately 32 inches wide by 60 inches long.
Can you scrap a cast iron skillet?
No problem. Cast iron is totally recyclable. Since iron is the main component of steel, you should refrain from throwing it away. Your used cast iron appliances can be melted down and crafted into something brand new, and you can even get money for it!.
How do you dispose of cast iron?
So, when next you have cast iron to dispose of, instead of binning it or simply abandoning it in your shed, just take it down to your recycling center and make a few bucks in the process.
What kind of scrap metal is worth money?
– Copper is by far the most expensive metal. High-grade copper, called Bare Bright, can get up to $2.85 a pound. Low-grade copper like the kind found in Christmas Lights is about a quarter a pound. – Aluminum, like the kind in house siding, window frames, or aluminum cans can be worth up to 65 cents a pound.
Should I keep my cast iron tub?
if it’s in good condition, keep it. cast iron tubs are wonderful, and hold up better than the acrylic tubs that you can get now. they hold heat better too, if you want to soak.
How do I sell a clawfoot tub?
Here are a few places where you may be able to sell your tub. Local antique dealers. Scrap yards. Newspaper or Magazine Classifieds. eBay. Craigslist. Facebook Marketplace.
Can I smash a cast iron bath?
Breaking up a cast iron bath can be done with a big sledge hammer!May 1, 2018.
Can you cut a bathtub?
A tub cut-out is a quick and economical option for converting a standard bathtub into a “step-in” shower or bathtub. During this process, a portion of the sidewall of an existing bathtub is removed and a watertight composite insert cap is placed over the cut-out.
How do you cut a cast iron clawfoot tub?
Lesson learned: use a masonry abrasive cutting wheel on the inside of the tub to first cut cleanly through the porcelain. Then use a metal cutting disc to cut through the cast iron in order to avoid large chips.
