Table of Contents
How do I know what kind of toilet flapper I need?
Look at the flush valve drain opening at the bottom of your tank. If the opening looks about the size of a baseball or orange, you need a 2″ flapper. If the opening looks about the size of a softball or grapefruit, you need a 3″ flapper.
Are most toilets 2 or 3 inch flappers?
A majority of toilets will use the two inch flapper; however three inch flappers have become popular in recent years and can be found in newer toilets manufactured since 2005. An easy reference for determining your toilet’s flapper size is to look at the flush valve drain opening at the bottom of your tank.
Are toilet flappers universal?
Are all toilet flappers universal? No. There are universal designs like the Fluidmaster flappers that replace most other flappers and there are specialty flappers for specific flushing systems.
Is Korky or Fluidmaster better?
Both models will fit an average size toilet but the Korky model is a little better for smaller models while the Fluidmaster has the advantage for larger ones. Noise level is important when choosing a replacement valve – no one wants to be awake all night listening to the toilet!.
What size flapper does a Toto toilet use?
The Genuine TOTO 3 Inch Flapper by Korky is fully adjustable to fit all 3 inch TOTO toilet models. It is made with the longest lasting material on the market. The adjustable flapper has 8 settings to ensure it fits all TOTO models.
How often do toilet flappers need to be replaced?
Some drop-in bowl cleaners are also hard on the rubber component of a flapper. As the flapper deteriorates it allows leakage. Although it is not something many of us think of as needing replacement on a routine basis, in general, a toilet flapper should be replaced every three to five years.
Are all toilet fill valves the same size?
Toilet flush valves come in different sizes ranging from 2 to 4 inches, depending on the toilet design. In most cases, larger valves move water faster, resulting in a better flush. When replacing the flush valve in an existing toilet, make sure you get a valve that will work for that specific toilet.
Do I need a float on my toilet flapper?
Get a Flapper with a Chain Float A chain float helps the flapper stay open a bit longer, allowing more water to enter the bowl for a better flush. Get a stronger flush—and a lower water bill.
Are Korky flappers good?
This flapper from Korky features an easy-to-use dial with multiple flow settings, allowing you to optimize each flush and save money on your water bill. With its Korky red rubber, this flapper is one of the more durable flappers you can buy.
Are Korky toilet valves good?
Just as good or bad as any other valve kit probably. Yes, this kit will get your running toilet fixed, and yes, it’s pretty easy to install. But it’s not magically quiet, and it’s about the same quality as any other plastic fill valve and flapper.
Is Fluidmaster made by Kohler?
Will another brand of parts fit my Kohler toilet? Fortunately, yes. A commonly known aspect in plumbing is that Fluidmaster actually makes the parts for Kohler toilets. Sometimes they are rebranded and built to the specs for Kohler’s requests, but the innards are the same!May 15, 2015.
Are all Toto Flappers the same?
The Genuine TOTO 3 Inch Flapper by Korky is fully adjustable to fit all 3 inch TOTO toilet models. The adjustable flapper has 8 settings to ensure it fits all TOTO models.
Why does my TOTO toilet keep running?
A toilet that won’t stop accumulating water in the tank may have a defective fill valve. It’s also possible for the toilet to keep running if the Toto toilet flush valve and the flappers are defective and won’t seal the tank. Check for any debris and blockage that might be causing the problem.
Are TOTO toilet seats universal?
The TOTO S550e Washlet is an ultra high-end, luxury bidet seat from TOTO. It is a wonderful product, however, it is not compatible with all toilets. Therefore, before you make your purchase, you will want to make certain it fits your particular toilet design.
Do toilet flappers shrink?
The flapper is essential a giant seal. It is not unusual for the flapper to eventually shrink, warp, or crack. When that happens, water can seep from the tank into the toilet. You just need to replace the flapper with a new one.
Can you put Vaseline on a toilet flapper?
The flapper in the toilet opens and closes to let the water out of the tank. One easy, but temporary fix to make rubber toilet parts supple again is vaseline. The toilet must be drained and dried for this to work. Then, vaseline can be rubbed on the flapper and it’s connecting washer until they become soft.
What size are most toilet fill valves?
The standard size of a flush valve is 2 inches. This size is what you’ll likely find at a home improvement store and should work on most toilets, including low-flow and older models with larger tanks.
Can you replace a canister flush valve with a flapper?
The canister style flush valve seal is easily replaced. Turn off the water supply to the toilet. Reinstall the canister by lining the tab on the bottom of the guide with the slot of the flush valve and rotate it clockwise to lock the canister back into place (Fig.
Are all toilet floats the same?
The toilet float is a device that allows water to fill the tank without overflowing. You may have heard it referred to as the ballcock or float valve. While the design has changed over the years, and a variety of materials have been used in the construction, they all work pretty much the same.
