Table of Contents
The yellow wires underneath your thermostat connect to your compressor. They control your air conditioning system. The yellow wires terminate at your compressor contactor via an air handler. The yellow wires connect to the Y terminals on your thermostat.
What thermostat wire is for AC?
WHAT IS A C-WIRE? A C-wire, or a common wire, runs from your low voltage heating system (24v) and carries continuous power to your thermostat. In today’s electric market, most newer heating and cooling systems have C-wires, which guarantees compatibility for the installation of all smart thermostats.
What color thermostat wire controls the AC?
This is the most typical thermostat wiring style, and it applies to systems that regulate both heat and air conditioning. The wires are typically arranged as follows: red for 24-volt hot, white for heat, yellow for cooling, green for the fan, and blue for common (although the common wire may be a different color).
Which wire color is typically the speed for cool?
RC is for the air conditioner and RH is for the heating system.Basic Thermostat Wiring Colors – AC Systems Control Diagram. Thermostat Terminal Wire Color What is Does G Green Blower Fan Control Y1 Yellow Cooling Terminal – Condenser Control Y2 Light Blue but Varies♣ Cooling Second Stage W1 White Heating Control.
Do old thermostats have a C wire?
If you don’t see a wire you can identify as the C-wire, though, don’t despair yet – you may need to look behind your existing thermostat. If your current thermostat didn’t need a C-wire, it (or a wire that can be used as a C-wire) might be rolled up inside the wall.
What happens if you wire a thermostat wrong?
Potential consequences of improper installation could include: Electric shock. Blowing a circuit breaker. Damaging the thermostat unit, the electrical system or even the AC/furnace unit itself.
What does S1 and S2 mean on a thermostat?
The S1 and S2 terminals on the Honeywell are for a remote optional sensor. Your Honeywell may have been using the S1 and S2 terminal to determine when to switch from heat pump to gas.
What are the 5 thermostat wires?
5 Wire Thermostat Wiring (Any HVAC Device – Air Conditioners, Heat Pumps, Furnaces, etc.) Red wire for power (24V). White wire for heating (connected to W or W1 terminal). Green wire for fans. Blue or yellow wire for cooling (connected to Y). Black wire for “C” or “Common” wire.
What are the four wires in a thermostat?
In general, the heating wire (often white), goes into the “W” port, the cooling wire (often yellow), goes into the “Y” port, the wire that sends power from the HVAC system to the thermostat (often red), goes into the “R” port, the fan wire (often green), goes into the “G” port, and the common wire (often blue), which.
Is RC a common wire?
Here are common uses for wire colors: Blue or Black – C – Common wire, may be unused by your existing thermostat. Enables continuous power flow from the Red wire. Red – Rc – 24VAC (dedicated to heat call)Oct 25, 2014.
What is the orange wire on a thermostat?
The Orange Wire The orange thermostat wire links to your heat pump, if you have one. It terminates in your outdoor condenser for reversing valve operation from hot to cold. The orange wire connects to terminal O on your thermostat. The orange wire only applies to homeowners with an air-source heat pump.
What color is the C wire?
Blue wires are also called “C” wires because they are the Common wire. C wires are necessary for any “smart” thermostat that needs to be connected to a power source 24/7, regardless of your heat pump type.
How do I check if I have C wire?
It is easy to see if you already have a c-wire connected to your system. Simply remove your current thermostat face from its baseplate and look for the terminal labeled with the letter “c.” If this terminal has a wire attached to it, you have an active “c-wire.”.
Should my thermostat be on E or F?
The thermostat fan operation switch, labeled FUEL SWITCH in the diagram below, is factory-set in the “F” position. This is the correct setting for most systems. The “E” setting will allow the fan to turn on immediately with the heating or cooling in a system where the G terminal is connected.
Why is my AC blowing hot air after changing thermostat?
If your AC is blowing hot air, the thermostat may have been accidentally set to “heat.” If this is the case, it’s easy to fix on your own. Simply flip the thermostat setting back to “cool” and see if the air conditioner begins to blow cool air again.
Why is my thermostat not communicating with AC unit?
Loose connections, frayed wires, and aged wires all can cause your thermostat to eventually lose its connection to your A/C and heating system. Inspect your wiring thoroughly, making sure the connections are tight, and replace any wires as deemed necessary by you or an HVAC professional.
What do S1 and S2 wires do on thermostat?
S, S1, S2: These wires run directly outside and provide outdoor temperature information to the thermostat.
Does R go to RC or RH?
Here are some general guidelines: An R wire can go into a Nest Learning Thermostat’s Rc or Rh connector. The Nest Thermostat E only has an R connector, which is typically where an R wire would go. These are not jumper wires, and you can insert the Rc wire into the Rc connector and the Rh wire into the Rh connector.
