Table of Contents
Which side goes up, smooth or rough? Either is acceptable, but we recommend that the smooth side with the nailing pattern of every 8″ on center go up.
Which side of cement board faces out?
Cement board has a smooth side and a rough side. Face the rough side out if you will be using thin-set mortar adhesive to install the tile but the smooth side out if you will be using latex mastic.
How do you layout cement board?
#2 A cement backer board layout should be staggered. It’s kind of like building a wall of Lego’s. If you set each one directly on top of each other it is unstable. You create a stronger, more stable floor by staggering the backer board. Likewise, four corners of cement board should never meet at one point.
Can cement board be installed vertically?
Boards may be installed vertically or horizontally. Edges of the board parallel to framing must be supported by a structural framing member. Score and snap boards to required sizes and make necessary cutouts. Attach the HardieBacker® Cement Board with HydroDefense™ Technology.
Can you tile straight onto backer board?
As a building material, interior fibre cement tile backer board products are especially suited as a tiling base for tiling wet areas such as bathrooms, kitchens and showers as it is resistant to permanent water damage and does not need to be treated before tiling.
How do you mount Hardie board?
Drill pilot holes, at each mark, one-quarter to one-half inch deep, to make it easier to insert screws and prevent cracking the siding. Align the bracket holes with the pilot holes in the siding. Insert the screws and tighten securely using a drill with screwdriver bit attached. Hang the basket on the bracket.
Do you have to tape seams on Hardibacker?
For tile backer boards such as Durock, Wonderboard, Hardiebacker, Permabase, and others the seams between the board need to be treated with 2-inch alkali-resistant mesh tape.
How important is thinset under Hardibacker?
However, many manufacturers including, both Durock and Hardiebacker not only recommend that you use thinset under their backerboard, but they specify it and will void the warranty on their product if it’s not used. Thinset is going to create a solid surface under tile and prevent flexing that could lead to cracking.
Can Hardie planks be installed vertically?
HardiePanel vertical siding may be installed on vertical wall applications only. DO NOT use HardiePanel vertical siding in Fascia or Trim applications. The designer and/or architect shall take into consideration the coefficient of thermal expansion and moisture movement of the product in their design.
Should cement board be installed vertically or horizontally?
They can go up vertically or horizontally, it makes no difference. With a regular tub surround with a five foot back wall it is usually easier to use two horizontal sheets along the back wall and one vertical on each of the sides.
Can Hardie panel be installed horizontally?
HardiePlank® is more resistant to moisture damage than wood siding, so if you choose horizontal siding, it’s a great option.
Should I wet Hardibacker before tiling?
A. To be more precise, I’ve installed lots of concrete backer board for years, all with good results. The concrete is unaffected by any water that manages to get behind the ceramic tile. If you use cement backer board, you have to install a separate moisture barrier between the board and any wood it’s attached to.
Do you need to seal backer board before tiling?
To Seal or Not To Seal For the floor and sides of showers, as well as tile floors in other areas of the home, using a membrane underneath the backerboard may be your best bet to make absolutely sure moisture doesn’t get through to the studs underneath.
Can I use drywall mesh tape for cement board?
Apply Mesh Tape Paper tape simply won’t hold up on cement board. Although paper tape generally leads to a cleaner finish on drywall, you can still achieve a smooth look if you use mesh tape on a drywall/cement board joint. Use this self-adhesive joint tape where cement board and drywall meet.3 days ago.
Should you tape cement board joints?
The thinset and mesh tape are to strengthen the seams. If you are going to tile over the cement board, you should tape the seams. This should not be that difficult.
Do you nail or screw Hardie board?
What is the correct fastener pattern for installing HardieBacker® cement board? Fasten HardieBacker sheets with proper nails or screws (as listed in ”Materials Required” in the backer installation instructions) every 8” around the perimeter and all supporting studs.
Can you screw into Hardie backer board?
Use the fastener pattern as a guide. Fasten HardieBacker cement board with specified nails or screws (as listed in “Materials Required”) every 8 in over the entire surface. Keep fasteners between 3/8 in and 3/4 in from board edges and 2 in from board corners.
What is the difference between durock and Hardibacker?
Durock is a reliable cement product that contains glass mesh. It is the heavier of the two materials, which means it is more difficult to use and maneuver. HardieBacker is much more light, and it is also the best selling brand of cement board available. It is much cleaner because it does not have any glass in it.
