Table of Contents
Which of the following cable types often include a solid plastic core that keeps the twisted pairs separated?
Terms in this set (7) Which of the following cable types often includes a solid plastic core that keeps the twisted pairs separated? Cat 6 cables include a solid plastic core that keeps the twisted pairs separated and prevents the cable from being bent too tightly.
Which of the following connector types are used with UTP cables?
The standard connector for unshielded twisted pair cabling is an RJ-45 connector. This is a plastic connector that looks like a large telephone-style connector (See fig. 2). A slot allows the RJ-45 to be inserted only one way.
Which of the following types of cable is commonly used to connect an RJ45 connector?
Ethernet cables come with RJ45 connectors on both ends. Because of this, an Ethernet cable is sometimes designated as an RJ45 cable. These cables are often used to connect computers onto Ethernet networks. The RJ-45 connector resembles a six-pin RJ11 connector, though the 45 is slightly wider.
Which tool is used to attach an RJ45 connector to a CAT 5 cable?
An RJ45 crimping tool (sometimes called an RJ45 crimper or RJ45 connector tool) is used to attach the male plug connectors to the ends of a suitable cable. This is normally some category of Ethernet cable.
Which of the following connectors Fiber optic cables use?
The ST connector is used with fiber optic cable and uses a twist-type connector. To remember the difference between ST and SC connectors, use the mnemonics Set-and-Twist and Set-and-Click. SC and LC connectors are used with fiber optic cables, but plug in instead of twist.
Which of the following types of connectors are used to terminate a Cat 5e network cable?
Cat5e uses four twisted pairs for transmission in each cable. The following picture shows the structure of the Cat5e cable. The termination of Cat5e Ethernet cable should use RJ45 connectors. As there are four pairs of copper wires inside a length of Cat5e cable, the cable pinouts should be carefully managed.
What type of connector is most commonly used on a UTP Cat 5e cable?
CAT5E Keystone Jacks – CAT5E keystone jacks, or RJ45 connector is a standardized unit for terminating and connecting Ethernet cable. The RJ45 connector is commonly used for twisted pair and multi-conductor flat cable. CAT5E jacks are an integral part of any reliable, high speed network.
What type of port uses an RJ 11 connector quizlet?
RJ11 ports are used by telephones and modems to send analog signals.
Which of the following connectors UTP CAT 6 cables use?
Since the cable used is Cat 6 UTP, an RJ-45 connector is the most common connector that can be used.
What is RJ11 used for?
RJ11 is mostly used for voice applications. Computer networking. RJ45 is used in Ethernets or connecting cable/fiber modems or NBN box with Wi-Fi routers. RJ45 connectors can support up to 10Gbps over Ethernet, provided the other equipment like network cables also support that speed.
Which of the following is the most commonly used networking cable category?
Unshielded Twisted Pair (UTP) cable is most certainly by far the most popular cable around the world. UTP cable is used not only for networking but also for the traditional telephone (UTP-Cat 1).
What kind of network cable is most commonly used?
Unshielded twisted pair UTP cable is the most popular type of network cable. It is easy to work with, install, expand and troubleshoot. UTP cables typically contain four pairs of copper wires, with each pair containing two wires twisted together.
What is RJ45 crimping tool?
A crimping tool is a device used to conjoin two pieces of metal by deforming one or both of them to hold each other. For instance, network cables and phone cables are created using a crimping tool (shown below) to join RJ-45 and RJ-11 connectors to both ends of phone or Cat 5 cable.
What are tools used in cabling?
Tools Cutters, Scissors, Pliers. Cable Tie Tools. Compression and Crimp Tools. Fiber Optic Tools. Insertion – Extraction Tools. Manual/Automatic Switch Boxes. Network Testers. Punchdown Tools.
What are the types of connectors?
Electrical connectors are classified into three types based on their termination ends: board-to-board connectors, cable/wire-to-cable/wire connectors, and cable/wire-to-board connectors. Six levels of interconnection are normally seen in electrical connectors.
What are the 4 network fiber connectors?
There are quite a few different styles of connectors. In the USA for networking and audio/video, the three most popular styles are LC, SC, and ST. LC and SC tend to be the most commonly used styles. Today, ST connectors are seeing more limited usage.
What are RJ45 connectors used to terminate?
An 8-pin/8-position plug or jack is commonly used to connect computers onto Ethernet-based local area networks (LAN). Two wiring schemes–T568A and T568B–are used to terminate the twisted-pair cable onto the connector interface.
Which tool is used to terminate wire into termination blocks?
A punch down tool, also called a punchdown tool, IDC tool or a krone tool (named after the Krone LSA-PLUS connector), is a small hand tool used by telecommunication and network technicians.
Which of the following connectors are used to terminate a Cat5e and Cat 6a network cable?
The ends of the cable must be terminated. It uses RJ45 connectors. The conductors within the cable are twisted around each other to eliminate cross-talk.
What is Cat5e cable used for?
Category 5 cable, aka Cat 5, is a twisted cable built for computer networks. Since 2001, the most popular type of Cat 5 cable is the Cat 5e cable. It is a standard cable that provides performance for up to 100 MHz. Its other uses include carrying signals for telephones and video.
What device is commonly used to verify a UTP cable?
A cable tester is used to verify that all of the intended connections exist and that there are no unintended connections in the cable being tested.
What is Cat5e patch cable?
Cat5e Cables These Category 5e patch cables are an updated version of the Cat 5 cables that revolutionized networking in the 1990s. The difference is that Cat5e cables can handle speeds of up to 350 MBPS, whereas the regular Cat 5 cables can only handle speeds up to 100 MBPs. Cat5e cables are reliable at high speeds.
