Table of Contents
Best cement for plastering:- Best cement for plastering used in construction is OPC- 43 (Ordinary Portland cement grade 53) and PSC (Portland slag cement) brand of UltraTech Cement, ACC gold water shield, ACC Suraksha power, Ambuja Cement, Sagar cement, Dalmia Cement, Shri cement, Birla cement, etc.
Is UltraTech Cement good for plastering?
UltraTech Readiplast is perfect for manual plastering on both internal and external walls, including brick, block, concrete and hollow walls. UltraTech Super Stucco is a plastering agent that is perfect for surface finishing and its biggest advantage is that it requires no curing.
Which cement is best for plastering in Nigeria?
BUA Cement is the best cement for house plastering in Nigeria.
How can you tell the quality of cement plaster?
Check for smooth finish using spirit levels for undulations, cracks and evenness/straightness in vertical and horizontal directions. Ensure plastered surface is cured for the entire recommended period. Ensure plastering thickness is even at all points during plastering. Ensure the button marking tiles are removed.
What are the grade of cement?
Grade of Cement The strength gets further measured as the comprehensive strength, which is the moulded cement in the standard cube. After 28 days of curing, it gets estimated. The measurements are in Mega-Pascal or N/mm. Generally, there are three types of cement grades; 33-grade, 43-grade, and 53-grade.
Which cement is better 43 grade or 53 grade?
Initial Strength: 53 Grade cement is used for fast paced construction were initial strength is to be achieved quickly. 53 Grade cement has fast setting compared to 43-grade cement. 53 Grade attains 27 Mpa in 7 days compared to 23 Mpa by 43-grade cement.
What is the most commonly used grade of cement?
33-grade cement is commonly used for making concrete of low strength such as below M20 concrete grade. 43-grade cement is used in PCC and RCC works, preferably where the grade of concrete up to M30. Also, it is recommended for plastering, tiling, brickwork and stone masonry, flooring, pathway etc.
How do you prepare a wall for plastering?
Remove old wallpaper and any loose flaky paint. If old plaster is completely sound apply PVA solution( B&Q) to the walls and ceiling with a roller to seal. Switch power off at the consumer box then release light switch plates, ceiling roses/light fittings and plug sockets and wrap in cling film for protection.
What is UltraTech super cement?
UltraTech Super is a PPC grade cement. It is a finely blended cement manufactured using latest technology. The concrete produced by using PPC cement has high ultimate strength, is more durable, resists wet cracking, thermal cracking and has a high degree of cohesion and workability in concrete and mortar.
What’s the best plastering cement?
Which cement brand is best for plastering? OPC 43 (Ordinary Portland Cement) grade is the optimum choice for plastering work. It has high compressive strength, low heat of hydration and its initial setting time is slow.
Which cement is best for foundation?
Which type of cement is best for constructing the foundation? The foundation carries the load of the construction and hence needs to be strong and durable. Portland Pozzolana Cement (PPC) is the ideal cement to be used as it hydrates slowly and gives high final strength.
What is the price of cement in Nigeria?
In fact, a 50kg bag of cement in Lagos can cost as much as N200 more than the standard market price.Current prices of cement in Nigeria (as of today)
| Cement Brand | Retail Price (per 50kg bag) | Wholesale Price (600 bags) |
|---|---|---|
| UNICEM | ₦3,950 – ₦4,100 | ₦2,300,000 – ₦2,350,000 |
What is cement ratio for plastering?
Mix cement and sand in the ratio of 1:6 (1 cement:6 sand) for inner plastering of bricks. And for outer plastering mix it in the ratio of 1:4. On a brick wall never do plastering of thickness more than 12 or 15mm.
Which cement is the best in Nigeria?
Though the popular cement in the study area is DANGOTE, SUPASET cement is the best cement in terms of strength characteristics while UNICEM possesses the least compressive strength.
What is the difference between cement and plaster?
This is the key difference. Interiors are usually finished using plaster, while exteriors use cement render. When applied to a flat surface, plaster is extremely smooth, so it’s perfect for interiors. Cement rendering involves a much higher proportion of sand for additional strength.
Which is the best cement for RCC?
There is three types of cement available in market or ordinary Portland cement (OPC) Portland slag cement (PSC) and portland pozzolana cement (PPC). OPC 53 and PPC ( Portland pozzolana cement) of all brand are the best cement for rcc roof slab construction in india,bihar and jharkhand.
Is OPC good for plastering?
OPC-33 Grade- It is not widely used can only be used for low strength works like plastering. OPC-43 Grade- It is widely used in wall plastering, non-RCC works, pathways and achieves 43 Megapascals of compression strength in 28 days.
How is PPC cement used?
Uses of Portland Pozzolana Cement
- Used in hydraulic structures, marine structures, construction near the sea shore, dam construction etc.
- Used in pre-stressed and post-tensioned concrete members.
- Used in masonry mortars and plastering.
- As it gives better surface finish, it is used in decorative and art structures.
What is the grade of UltraTech PPC cement?
UltraTech Portland Cement, 50 Kg
| Type | PPC |
|---|---|
| Cement Grade | 43 Grade |
| Packaging Size | 50 kg |
| Packaging Type | HDPE Sack |
Which is the best plastering cement?
Best cement for plastering:- Best cement for plastering used in construction is OPC- 43 (Ordinary Portland cement grade 53) and PSC (Portland slag cement) brand of UltraTech Cement, ACC gold water shield, ACC Suraksha power, Ambuja Cement, Sagar cement, Dalmia Cement, Shri cement, Birla cement, etc.
Which plaster is best for walls?
Cement plaster is the best bet when it comes to plastering exterior walls because it is moisture-resistant and will protect the wall against climate changes as well as environmental pollution. Moreover the durability factor in cement plaster makes it the ideal choice for internal plastering too.
Where is PPC cement used?
Portland Pozzolana Cement (PPC) It can be confidently employed in construction of hydraulic structures, marine works, mass concreting such as dams, dykes, retaining walls foundations and sewage pipes. It is also suitable for use in common applications such as masonry mortars and plastering.
Which is best cement?
10 Best Cement Companies in India As Per Production Capacity
| S.No. | Cement Company | Production Capacity (MTPA) |
|---|---|---|
| 1 | Ultratech Cement | 102.75 |
| 2 | Shree Cement | 37.9 |
| 3 | Jaypee Cement | 33.8 |
| 4 | ACC | 33.41 |
Which cement is costly OPC or PPC?
The cost of OPC is around 300 rupees per bag which is slightly more expensive than PPC. Whereas in the case of PPC, the expensive clinker is replaced by pozzolanic Material such as fly ash hence the price of PPC is slightly less than who OPC.
