Table of Contents
Prepare to Install Christmas Lights Consider light placements: String lights along some of the most commonly decorated areas such as along walkways or driveways, over landscape plants like hedges or trees, outlining the roofline or windows and door frames or wrapped around railings or posts.
What direction should Christmas lights be on House?
It works with any type of light. Hang the lights pointing up or down, just make sure they’re all clipped in the same direction. If you don’t have gutters, you can use the same clip to attach lights to your shingles instead. Simply flip the clip around.
When should you put Christmas lights up?
Holiday lights are OK to go up the day after Thanksgiving. You can take them down anytime after New Year’s Day, but before January 6th—that’s Three Kings Day and the last of the 12 days of Christmas.
Where do you start your Christmas lights?
How to Hang Christmas Lights Top to Bottom Plug the lights in to make sure all the bulbs are working. Starting at the top of the tree, intertwine the lights on top of and under branches. Work your way down and around the tree, hanging lights in the back as well.
How many feet of Christmas lights do I need for my house?
When decorating your house eaves, a simple rule is to start with at least 60 feet of string lights. Add another 10 to 12 feet for every awning you plan to light. If you have the time and patience, you can measure your eaves and awnings with measuring tape to get the most precise necessary length of string lights.
How do you hang Christmas lights on a roof without a ladder?
There are a few ways to hang Christmas lights without a ladder. The first is a simple solution, a light- hanging pole. To use these poles, you attach the clip to the lights then place the clip in the pole’s grip. Then, you simply extend the arm and hook the clip over the gutter.
How do you put Christmas lights on your house without nails?
Try using plastic clips instead of nails or staples. Plastic clips are the easiest way for hanging Christmas lights on the roof. You can also use a staple gun to hold them in place, but that will also make them more time consuming to remove after Christmas.
How do you hang Christmas lights on outside walls?
Using Hot Glue on Brick, Concrete, and Stucco. Plug in a hot glue gun and let it heat up. Select a large glue gun for hanging the lights, and pick glue that’s safe for outdoor use. Load the glue gun and plug it in with an extension cord so you can walk around with the glue.
How do you attach string lights to a house?
How to Hang Outdoor String Lights Step 1: Measure & Prep. The first thing to do is measure for both your string lights and the cable guide wire you need for spanning across any open spaces. Step 2: Mount Screw Hooks. Step 3: Connect & Tighten Cable. Step 4: Attach Your String Lights. Step 5: Sit Back and Enjoy!.
Should I leave Christmas lights on all night?
Lights, when turned on, produce heat. The longer that the lights are left on, the hotter they become. Therefore, leaving your Christmas lighting on for too long – regardless of whether it’s overnight or over a long period during the day – isn’t recommended.
Can you leave Xmas lights on all night?
Though the CPSC doesn’t recommend leaving your Christmas lights on overnight, the television show MythBusters decided to take the question of whether or not leaving Christmas lights on your tree overnight can start a fire, and put it to the test. After just 40 minutes, the tree had heated up to 225 degrees.
Can I leave my Christmas lights up all year?
Always use Christmas lights made for outdoor use. Incandescent lights typically can’t handle extreme weather shifts. Too much sun and rain can damage your lights. LED lights not only last longer, but they’re energy efficient, which is perfect for yearlong use.
Do you put lights on Christmas tree first?
Start with the lights first The first, most important thing you need to do when decorating your Christmas tree, is to always add the lights first – it’s more difficult to do this after you’ve added decorations like baubles and garlands.
How much does it cost to have your house professionally decorated for Christmas?
How Much Does It Cost for Someone to Decorate Your House for Christmas? On average, homeowners spend $400 to have someone professionally decorate and install Christmas lights. For homes higher than one story, the cost can go up to $1,130.
Should you tape Christmas light connections?
Don’t assume all lights are designed for outdoor use; wrap all connections between strings with electrical tape to keep moisture out. Always plug lights into a covered outlet protected with a ground-fault circuit interrupter (GFCI)—running cords from inside the house through a window or a mail slot is a fire hazard.
How do you know if Christmas lights are indoor or outdoor?
Indoor Christmas lights will have a green UL listed tag, or a silver tag with the “UL” written in green. Christmas lights approved for the outdoors will have the UL listed tag in red, or silver with red writing.
How do I put Christmas lights on my roof ridge?
Lift the closest shingle at the corner of the roof ridge and insert the first shingle tab underneath with the other hand. The weight of the shingle will hold the shingle tab into place when you release it from your grip. Continue placing the shingle tabs under the shingles, until you reach the end of the light string.
How do you hang Christmas lights on a steep roof?
Using specially made exterior light hangers, such as shingle edge clips or gutter clips, to mount Christmas lights. They can be mounted without tools. Attach all of the clips on one section before hanging the lights makes the job easier. Buy light hangers wherever holiday decorations are sold.
How can I hang Christmas lights outside without holes?
One of the ways to hang outdoor patio lights without nails is using adhesive hooks or gutter hooks. Alternatively, you can tape or staple them to your wall. You can also hang them on trees, bushes, posts, potted plants, and your fence. Another way to brighten up your patio is by using lanterns.
How can I hang Christmas lights without drilling holes?
Hanging Outdoor Christmas Lights Without Drilling Holes in Concrete Stucco Gutter Hooks. Gutter hooks allow homeowners to attach Christmas lights securely from all types of drain systems. Magnetic Hooks. A set of industrial magnetic hooks also allows homeowners to avoid drilling into stucco walls. Suction Cup Hooks.
