Table of Contents
Plug your car code reader into the diagnostic link connector under the dash (engine off). Then start the vehicle and follow the auto code reading procedure in the instruction manual.
Where do you plug in OBD code reader?
Connect Your Scanner to the DLC Every car made after 1996 features a Diagnostic Link Connector (DLC). This 16-pin connector is typically located on the left side of the driver’s dashboard, near the steering column.
Where is my OBD port?
The most common place to find your car’s OBD2 port is under the dashboard on the driver’s side. Most vehicles have the connector under the instrument panel (aka, the dashboard) on the driver’s side, but some can be found near the center console area or even on the passenger’s side of the car.
What is a OBD-II port?
The On-Board Diagnostics II (OBD-II) port is used to access the vehicle’s computer for various tasks, such as emissions tests and diagnostics. The OBD-II port is where the Hum System is installed so that the network can communicate with the vehicle directly.
Does car have to be running to use OBD2 Scanner?
The answer to your question is NO, the car does not have to be running to use a basic scan tool. It, however, does have to be running to see live data and perform specific tests.
How do you know if your car is OBD2 compliant?
All cars and light trucks built and sold in the United States after January 1, 1996 were required to be OBD II equipped. In general, this means all 1996 model year cars and light trucks are compliant, even if built in late 1995. 2) There will be a note on a sticker or nameplate under the hood: “OBD II compliant”.
How do I read obd2 Scanner?
How to read OBD codes: Preparation. Step 1: Plug the OBD scanner into the OBD port. Step 2: Turn on the ignition. Step 3: Enter the Vehicle Identification Number. Step 4: Find OBD codes in the menu. Step 5: Interpret the first character of the OBD code. Step 6: Interpret the second character of the OBD code.
What does 0 DTC mean on a code reader?
0 – Fuel and air metering and auxiliary emission controls. 1 – Fuel and air metering.
Can you drive with OBD plugged in?
Absolutely, sometimes it is required. Some insurance company’s offer an obdII device that stays plugged in all the time and sends them information about your style of driving.
Are all OBD2 connectors the same?
All OBD-II pinouts use the same connector, but different pins are used with the exception of pin 4 (battery ground) and pin 16 (battery positive).
How many OBD2 ports does a car have?
The OBD-II on-board computer features a 16-pin port located under the driver’s side dash. It allows a mechanic or anyone else to read the error code using a special scan tool.
Do all cars have OBD ports?
You can find an OBD2 port in all gas vehicles manufactured since 2001 in the European Union, and in all vehicles from 1996 onwards in the USA. Therefore, if you own a car manufactured in recent years, it will be equipped with an OBD2 port!.
What cars are OBD2 compliant?
1996 or newer model year vehicle sold in the United States. United States legislation requires all cars and light trucks model year (MY) 1996 and newer to be OBD-II compliant. 2001 or newer model year gasoline vehicle sold in the European Union. 2004 or newer model year diesel vehicle sold in the European Union.
Does my car have OBD1 or OBD2?
The standard OBD2 interface is a 16-pin connector. OBD2 interfaces are the same, so if the interface has 16-pin connector, so your car is OBD2. If it looks different, your car is OBD1.
What does DTC 01 mean?
DTC 01 General Sensor Fault.
What does Hcat mean on a code reader?
ago. Additional comment actions. Hcat and air-specifically air pumps were used in the 90s to help pre heat the catalytic converter to help it burn cleaner and more efficiently faster, but by the 2000s engine programming made those things obsolete hence, the scanner reads n/a. 2.
What does MIL mean on a code reader?
The check engine light, often referred to as the Malfunction Indicator Lamp or MIL, allows the PCM to alert the driver that an emissions related problem has occurred or is currently occurring. The check engine light is located on the dashboard panel and is colored red or yellow.
Does OBD port drain battery?
Battery Drain So a poorly designed OBD device, when left plugged into the OBD port, might completely drain your battery. Worse still, if a device is not carefully designed, it can turn on your ECU even while the car is not running, draining your battery even faster.
Is OBD port always powered?
So yes, the OBD port’s power pin (battery positive 16): MUST be unswitched (always connected to battery power) MUST be able to handle 4.0A (much more than any dashcam will use)Apr 20, 2017.
How do I unplug my OBD2?
First remove the housing by reaching behind, pinching the sides and pushing it towards the floor. Once that part is out, the piece will be dangling by the wiring harness. Now the actual port can removed from the plastic housing by pulling the harness backward out of it (i.e. up, towards your dash).
