Table of Contents
If you want to install under cabinet lighting as task lighting, you should place the strip lights closer to the middle front edge of the cabinets, so the countertop will be exposed to as much light as possible. For ambient or accent lighting, you may want to place them closer to the back edge.
How far apart do you put under cabinet lighting?
In general, you will likely want approximately 1-2 feet between puck lights, but if there is a shorter distance between the cabinets and kitchen counter, you may want to place them closer together, as the light will have less distance to “spread out.”.
How do you layout under cabinet lighting?
Rules of Thumb for Undercabinet Lighting Locate the fixtures at the front of the upper cabinet. Use lensed fixtures (and avoid bare LED light tape) to reduce glare from polished countertops. Use the longest fixture that fits to provide even light across the entire counter. Match the color temperature of the downlights.
What is the best location for under cabinet lighting?
If you want to install under cabinet lighting as task lighting, you should place the strip lights closer to the middle front edge of the cabinets, so the countertop will be exposed to as much light as possible. For ambient or accent lighting, you may want to place them closer to the back edge.
Where should LED strip lights go?
5 great spots for LED strip lights around your home Under cabinets. As the name implies, under-cabinet lighting illuminates areas underneath your cabinetry. Along toe kicks. Under shelves. Under the bed. Behind computer and TV screens.
How many under cabinet LED lights do I need?
For 11-18 inches, use 2-3 puck lights. For 19-26 inches, use 3-4 puck lights. For 27-34 inches, use 4-5 puck lights. For 35-42 inches, use 5-7 puck lights.
How do you measure for under cabinet lighting?
Look underneath the wall cabinet where you placed your center mark. Each cabinet has a small lip around the outside edge. This creates a recess beneath the cabinet. Measure the distance inside the recessed area from the front of the cabinet to the back of the cabinet to obtain the cabinet depth.
How do you measure under cabinet lighting?
To minimize reflection, choose light fixtures with a lens to soften light output. Light-colored counters reflect more light than darker counterparts, making your under cabinet lights appear brighter. If you have dark counters, consider a lamp with higher lumens to achieve the desired level of light under your cabinets.
How do you hide the wires under cabinet lighting?
One of the simplest solutions to unsightly under-cabinet wires is using a cable protector. You can secure the wiring into one bundle with tie wraps and adhere it to the cabinet’s underside with staples. The wiring length itself should extend directly from the light to the wall.
Where do you put puck lights?
Several useful locations for puck lights include: Underneath kitchen cabinets. Inside closets, cabinets and drawers. In outdoor seating areas. Inside vehicle trunks, glove compartments or center consoles. Within emergency kits. In reading nooks. Beside beds. In outdoor supply kits for camping, fishing, hiking and more.
Do you put LED strip lights on the wall or ceiling?
We recommend having the lights go up your wall, but if you prefer to start the line of lights from the top of your wall, you will need LED strip clips to help hold up the power supply against the wall.
How do you arrange LED lights?
If you choose to fit horizontally, it’s best to stick the LED as close as possible behind the lip of the drop-ceiling, in order to avoid light-dots shining on the vertical surface behind.
Can you plug LED strip lights into an extension cord?
LED Strip Jumpers are best used to run as extension cables from the LED power source to the LED strips themselves. They can also be used to jump in between two reels of LED strips, just make sure you aren’t exceeding the maximum run length of your strip.
Can LED strip lights be hardwired?
LED Strip splitter cables come in up to 4-outputs so you could potentially have 4 strips running seamlessly from one Power Supply connection! This can be done with wire nuts or wiring all strips to a common positive and negative wire so you can make a one to one connection with the hardwired power supply.
How many lumens do you need for under counter lighting?
The required Lumen per foot depends on the intended usage. A guideline below: Accent lighting – 150 to 250 Lumens/ ft. Under-Cabinet Lighting & Nearby Task Lighting (Lamps) – 175 to 550 Lumens/ ft.
Do under cabinet lights go in front or back?
When mounting any fixture under a cabinet, position it to the front. If there is a lens, face it toward the backsplash. The bottom-front rail of the cabinet should hide the fixture from your line of sight, whether you’re standing or seated.
What is the best wattage for under cabinet lighting?
As a point of reference, remember that kitchen counters – often lit by under-cabinet fixtures – need about 4 to 10 watts of power per foot with 5 mm LEDs or about 20 watts per foot with high-power LEDs. For precision lighting, you’ll need low-output lamps in tight clusters or evenly-spaced high-output LEDs.
What kind of light goes under kitchen cabinets?
LEDs and fluorescents are a popular choice for under cabinet lighting in kitchens because they emit little to no heat, which helps to keep you cool while you’re cooking. LEDs also operate well in high-humidity, making them a good choice for bathrooms.
How do you hide wires from lights?
Use tiny adhesive hooks to attach lamp cords to the back of your furniture, and they’ll be hidden in plain view. Get the tutorial at Hi Sugarplum! There’s no need to drill a hole in your wall to hide the TV cords.
How do you hide exposed electrical wires?
8 Genius Ways to Hide Every Wire in Your Home Hook Cords to the Back of Your Furniture. Corral Them Behind the Couch. Hide TV Wires in Plain Sight. Run TV Wires Behind the Wall. Tuck Cord Chaos Into Tubing. Slip Them Into a Drawer. Snake Them Through Baseboard Accessories. Stash Wires and Routers In “Books”.
How do you hide wires without cutting a wall?
How to Hide Your TV Wires Without Cutting Into Your Walls Use Cord Clips to Hide Your Wires Behind a TV Stand. Use Zip Ties to Keep Your Wires from Touching the Floor. Use a Cable Management Box. Use a Wall Cord Raceway Kit. Hide Your TV Wires Inside a Baseboard Raceway. Use a Fabric Cord Concealer.
