Table of Contents
What is the best location for under cabinet lighting?
If you want to install under cabinet lighting as task lighting, you should place the strip lights closer to the middle front edge of the cabinets, so the countertop will be exposed to as much light as possible. For ambient or accent lighting, you may want to place them closer to the back edge.
How do you layout under cabinet lighting?
Rules of Thumb for Undercabinet Lighting Locate the fixtures at the front of the upper cabinet. Use lensed fixtures (and avoid bare LED light tape) to reduce glare from polished countertops. Use the longest fixture that fits to provide even light across the entire counter. Match the color temperature of the downlights.
Does under cabinet lighting add value?
2. Under-cabinet lighting. Under-cabinet lighting is as simple as it sounds: A strip of lighting that runs underneath your cabinets. But the benefits can significantly boost the value of your home, says Torres, who likes to include this feature in the kitchen.
Do under cabinet lights go in front or back?
When mounting any fixture under a cabinet, position it to the front. If there is a lens, face it toward the backsplash. The bottom-front rail of the cabinet should hide the fixture from your line of sight, whether you’re standing or seated. A plug-in fixture may be used for short runs of under-cabinet lighting.
How do you hide the wires under cabinet lighting?
One of the simplest solutions to unsightly under-cabinet wires is using a cable protector. You can secure the wiring into one bundle with tie wraps and adhere it to the cabinet’s underside with staples. The wiring length itself should extend directly from the light to the wall.
Do LED strip lights need to be plugged in?
When it comes to led strips, most of them will come with a female 2.1mm connection point ensuring that the connection is seamless. All you’ll need to do is plug in the led strips into your plug-in power supply and you’ll have a working led light. The other option is for those using the hardwired power supplies.
Do under cabinet LED lights need a transformer?
When installing low voltage under cabinet lights, you will have to take some special measures. You’ll need a transformer to convert your home’s voltage supply to a much Page 11 11 lower number, and if you plan to use any accessories, like dimmers, they’ll need to be compatible with your lighting system.
How far apart should under cabinet puck lights be?
In general, one puck light is needed for every 8–12 in. of cabinet length. This spacing will provide the best uniformity and distribution of light and avoid any dark areas under the cabinets. Incandescent linear lighting comes in two forms: as a light strip or as a linear fixture or light bar.
What adds most value to a house?
What Home Improvements Add the Most Value? Kitchen Improvements. If adding value to your home is the goal, the kitchen is likely the place to start. Bathrooms Improvements. Updated bathrooms are key for adding value to your home. Lighting Improvements. Energy Efficiency Improvements. Curb Appeal Improvements.
Are dimmers worth it?
Yes, dimmers can bring convenience to your home and have many benefits, such as energy-saving features, increasing the life of your LEDs, additional ambient lighting, and scene control.
Does adding a backsplash add value?
In terms of professional installation you need to keep in mind that this will cost more but it may look better in the end. Overall, a backsplash is a fantastic way to increase the value of your home a little at a time.
What is the best color for under cabinet lighting?
Best Color for Under Cabinet Lighting 2700K is considered the same color as the classic incandescent light bulb. 3000K is slightly bluer and is similar to halogen bulb light color, but still has a warm, inviting yellow color to it.
What kind of light goes under kitchen cabinets?
LED lighting is also the most energy efficient and long-lasting. Moreover, because it emits very little heat when on, it is perfect for use under kitchen cabinets, where food may be stored. Best of all, LED can produce a range of colors, from warm to cool.
Can you run Romex in cabinets?
The National Electrical Code requires that plastic-sheathed cable (commonly called Romex) be protected in areas where it’s subject to abuse. If you can run the plastic-sheathed cable high in the cabinets or behind drawers, you may not need conduit.
Where should strip lights be placed in kitchen?
With task lighting your goal is to light your worktops, so if you were to install the lights towards the back, you are shining most of the light onto the splash back rather than the worktop itself.By installing the lights towards the front of the cabinet it will give the best spread of light, as wall cabinets are Oct 21, 2016.
Can you use LED strip lights under cabinets?
Under the Cabinets. If your kitchen has a row of wall cabinets, stick the LED lights along their bottom, or along the kitchen console table. Then adjust the color to whatever you like depending on kitchen decoration style and your preferences, and make the kitchen exude a different aura.
How do you hardwire LED under cabinets?
Then, follow these steps for installation: Disconnect the power. Locate the correct breaker and turn off the power supply to the switch outlet where you’re going to connect the lights. Attach the lights. Cut the wall. Run the wire. Run the cord. Connect the lights. Wire the switch. Cover your work.
