Table of Contents
As a rule, place the top rod 80 to 82-inches up from the floor and the bottom rod about 40-inches up from the floor. For a single rod application, plan 60-inches from the floor for placement. You will need at least 1-foot, 9-inches (24-inches is standard) away from the back wall for hanging.
How far from the wall do you hang a closet rod?
Measure for the distance away from the wall. A minimum of 10 inches is best, but it’ll depend on the size of your hangers. If there is a shelf above the rod, determine the vertical distance from the rod to the shelf; two inches should be suffice.
How much space do hanging clothes need?
Shelves for folded clothes should be placed around 12 inches apart. 84 inches is considered the minimum height to hold double hanging rods. Blouses and shirts will take up about 1 inch of rod space, pants and skirts around 1 1/4 inches and dresses, jackets and suits about 2 to 3 inches.
How long can closet rods be without center support?
If your closet rod is longer than 48 inches, you will need support. However, regardless of how long the closet rod is, if you’re hanging heavier items such as winter jackets, then you will want support no matter what.
How much weight can a wooden closet rod hold?
Never put more than 25-pounds of clothing on one of these rods or it will fail. The motorized version works with a remote control and can hold up to 60-pounds of clothing per rod.
What is the average hanging space per person?
Aim for a minimum of 2.4m of wall space per person (without additional bedroom furniture). Allocate 600mm for the widest items you wish to hang, plus an extra 100mm for easy viewing. You’ll need a corridor of at least 800mm as your ‘walk-in’ space.
How do you hang a closet rod in plaster?
Drill a hole through the plaster wall, insert the toggle bolt through the rod holder, press the toggle through the drilled hole and tighten it down with a screwdriver. Hang the dowel rod on the closet rod holders.
How shallow can a closet be?
The standard minimum depth for a reach-in closet is 24 inches, but a closet intended to store coats or other bulky hanging items may need to be as deep as 28 inches. A closet less than 22 inches deep isn’t deep enough to allow hanging clothes.
What is a good master closet size?
A walk-in master closet should be a minimum of 7-by-10 feet, and preferably 100 sq. ft. for two users. That gives you space to line two or three walls with shelves, cubbies, and poles, and the elbow room to reach them easily.
What lengths do closet rods come in?
Double-hung rods are typically 4 feet long each. Usually, one person takes up about 4 feet of closet-rod length. Whenever you hang a shorter rod, the diameter of the rod may become smaller, so leaning towards the 1 1/4 inch dowel in the case of double-hung rods is normal.
What is standard shelf height?
For ease of shelf access, bookcases are generally no higher than 84 inches. Small bookcases are usually 30 to 42 inches high. The highest shelf in a bookcase should be as high as an average-sized person can comfortably reach – about 72 to 78 inches.Contact Us. Species Modulus of Elasticity (E) Western Red Cedar 1.12.
What is the standard bedroom closet size?
A typical closet is approximately 24-inches deep. A walk-in closet should be at least 36- to 48-inches deep. The width of the closet ideally is half the width of the room, if not more. A standard 12-by-12 bedroom would ideally have a closet 6-feet wide by 48-inches deep.
Can you hang closet rod with drywall anchors?
To securely install a closet rod in drywall: Drive screws into the wall stud or drywall anchor, securing the bracket in place. Repeat this process for additional brackets, making sure they are level with the first bracket. Set your closet rod in place and use it to hang your clothing.
Do closet rods need to be in studs?
Basic Installation It should be placed in front of a stud so you can screw into the stud to give it support. The typical height of a closet rod is from 60 to 80 inches, and both brackets should be at the same height, or the hooks you hang from the rod will slide to one end.
How much weight should a closet rod support?
Aluminum Anodized Elite 1-5/16”: Up to 80 lbs. Stainless Steel 1-1/16”: Up to 95 lbs. Steel Polished Chrome Round 1-1/16”: Up to 110 lbs. Steel Polished Chrome Round 1-5/16”: Up to 170 lbs.
How much weight can closet rack hold?
For their closet shelving, you can typically expect to hold around 35 pounds per linear foot, unless you get the shelving with the ShelfTrack Hardware. Then, you can hold a very respectable 75 pounds per linear foot. If you get their Maximum Load Standard Shelving, you can expect to carry up to 600 pounds per unit.
Which type of wardrobe is best?
Decide what kind of wardrobe you want based on the size and shape of the room. A large straight wardrobe for a couple is best for storage, whereas walk-in closets are preferable for large rooms. This creates a separate alcove space even for storage of additional items.
What depth is a wardrobe?
Most wardrobe cabinets typically are 24 inches deep, but can be as narrow as 18 or even 12 inches in depth. Height also depends on application, but standard height is usually no more than 72 inches.
How narrow can a closet be?
The comfortable recommended depth of a closet is 24” (61 cm), but closet depths as narrow as 20” (50.8 cm) can be used if desired. Shelf depths of 12” (30.5 cm) should be used for shoes and smaller clothing elements.
Do closet walls have studs?
Closet shelves are usually anchored to the wall where the mounting screws can grab wall studs. If your walls are masonry, you likely don’t have studs at all. You’ll need the proper materials and methods to build a stud-free closet shelf.
How much weight can plaster walls hold?
Both plaster and drywall can hold roughly the same amount of weight. A screw driven into a stud in both plaster and drywall can hold 80–100 pounds (36–45 kilos). Anchored screws or other fasteners set into the wall where there is no stud can hold up to 20 pounds (9 kilos).
