Table of Contents
How deep should inside mount blinds be?
3⁄4″ is the minimum depth required for inside mount blinds.
How far should Window blinds be from window?
2) Measure distance from where the top of the blind will be located to the window sill. The blind should overlap the window opening on the top by at least 1-1/2″. Some products may require more then 1-1/2″ above the window for mounting hardware.
Where should blinds be placed in a window?
Outside-mounted blinds or shades are mounted on the wall outside the window frame, on the window trim or even on the ceiling above the window. Outside mounted window coverings may be right for your home if: You want to block more light. Outside mounts cover the entire window.
Should blinds be flush with wall?
1) Mounting flush with the wall gives a cleaner look, as it hides the depth of the window sill itself and gives a smooth surface against your wall. We recommend this in most cases if you are mostly concerned with aesthetics.
How far should blinds stick out?
A typical 2 inch window blind needs a minimum of an inch and a half but at least 3 inches for a flush mount. A flush mount blind is on that is completely recessed in the window frame and nothing is protruding out of the window frame.
How shallow is too shallow for inside mount blinds?
Window treatments like traditional blinds or shades look their best when mounted inside your window frame. The problem is that if your window’s sill is less than 1.5”, there’s not enough room for the mounting brackets for your blinds and shades to fit.
How much smaller should blinds be than the window?
Not Adding Width To Outside Mount Blinds We recommend going at least 2″ wider than the opening on either side, so 4″ total. For the height, go about 3 inches above the window trim (to allow for the mounting brackets) and measure from that point down to the window sill.
Do blinds go against the window?
Measure the width of the window at the top, middle, and bottom. Purchasing Blinds:After measuring the window outline, you can pick your blinds which best suits to your room. And for inside mount, the brackets should be put up against the inside top corner of each side window.
Are blinds better inside or outside recess?
Why fit outside of the recess? The main advantages of hanging your blinds outside of the recess are that more light will enter the room when the blinds are open. You can block out more light when the blinds are closed. However, any items that you have placed on the windowsill won’t be visible when you close the blinds.
How high should outside mount blinds be?
They need to be high enough that the vanes will not touch the ground or drag along it. Most people install their vertical blinds so the vanes hang 2-3 inches above the ground.
Can you hang blinds outside window frame?
Outside mounted blinds and shades give the flexibility of choosing almost any window covering for any situation. That is simply because the window frame doesn’t matter. You just mount the brackets outside of the window frame and hang your blinds or shades so they extend past the frame.
Can blinds be wider than window?
In most cases, it is OK to have your blind longer than your window, even for inside mount. If you order the shade too long, it may not align properly when lowered to the sill of your window. Measuring a Window for Inside Mount. An inside mount blind should fit the window measurements perfectly.
How do you measure the depth of a window?
Measure window depth. To determine depth, open the window and measure the sill space from the trim in the front to the trim in the back. This space should be a minimum of 3¼ inches in order for a replacement window to fit.
Are blinds true to size?
When measuring for blinds you should measure the width at the top, middle and bottom and take the smallest measurement. If the blind is too wide, it will not function properly. Blinds should barely fit inside the window opening. The whole reason for using blinds is to block the light.
Can you put two blinds one window?
When you hang multiple blinds in the same window, each blind has its own headrail and is installed separately, so you can operate them individually. For two (2) separate blinds in one window, take the smallest width and divide it by 2. Then add 1/4″ to the width of each blind.
Should blinds cover the whole window?
Consider how much privacy and light control you want in order to get the right outside mount coverage and enough overlapping on the sides. You want to maintain your privacy and cover the whole window fully. The more coverage, the less light seepage from gaps on the sides.
Do blinds go on the frame?
Mounting blinds on the inside of a window frame is the most popular. Blinds that are hung within the window frame offer a more clean look to the window.
