Table of Contents
What are the knobs on drawers called?
A drawer pull (wire pull or simply pull) is a handle to pull a drawer out of a chest of drawers, cabinet or other furniture piece.
Do knobs look good on drawers?
The general rule of thumb is that knobs are best for cabinet doors, though occasionally you can break the rules. “We might do a single knob on a smaller drawer,” says Gorsline.
Where do you put knobs on drawers?
Cabinet knobs are placed opposite of door hinges. On wall cabinets, knobs are usually placed 2-1/2” to 3” from the bottom corner of the door. On base cabinets, they are placed 2-1/2” to 3” from the upper corner of the door. If your drawer is 24” or wider, you may choose to place a second knob.
What is more popular knobs or pulls?
Overall, to cut a long story short, contemporary and modern cabinets work in harmony with simple knobs and pulls. You can also mix and match them to create a complementary look, like the transition kitchen. Traditional-style spaces demand much more intricate hardware, making pulls the more common selection.
What does center to center mean on drawer pulls?
The Center-to-Center of any drawer pull is the distance between the center of one screw hole to the center of the other. Measuring the center-to-center of the drawer pull is key in determining what new hardware will fit and whether you’ll need to drill new mounting holes or fit into existing ones.
Where should knobs go on cabinets?
Cabinet knobs should be installed on the stile opposite the hinges. The general rule is to place a knob 2 1/2″ – 3″ from the corner of the door. For upper cabinets, install knobs in the bottom corners of the door. For lower cabinets, place them in the upper corners.
Should kitchen cabinets have knobs or handles?
Should I use knobs or pulls on kitchen cabinets? Whether you should use knobs or pulls for your kitchen cabinets is up to personal preference. Knobs can be the more comfortable option for cabinet doors because your hand rotates naturally as you open them.
Do knobs go on drawers or cabinets?
Knobs can be placed on both cabinetry doors + drawers. Mounted on the door stile, cabinetry knobs are placed on the opposite side of the door hinge + typically 2-½” to 3” from the bottom corner of the door for upper cabinets. While on base cabinets knobs are usually placed 2-½” to 3” from the upper corner of the door.
Do knobs go on doors or drawers?
1: In traditional spaces, the general rule to follow is knobs on doors and pulls on drawers. Sometimes we’ll break this rule for small drawers or small spaces, like bathrooms! From our Sunset House.
Where do handles go on Shaker doors?
For 5-piece cabinets (like a Shaker or any style that isn’t one flat slab of wood), the traditional placement is to center the knob in the corner of the face frame, so that the knob is in the center of both the vertical and horizontal frame pieces.
Can you mix knobs and pulls in a kitchen?
Yes. You can mix knobs and pulls. It’s recommended to use pulls for cabinets that are higher up and knobs for lower style cabinets. Lower drawers that slide are typically fitted with a pull handle.
Should kitchen and bathroom hardware match?
The cabinet fixtures and hardware in a bathroom do not have to match the faucets. Matching all the hardware to each other is the safest way to make sure the fixtures look cohesive. It’s amazing how something as small as faucets and hardware can alter your bathroom’s entire look.
Do you put pulls on fake drawers?
I would recommend putting pulls on the dummy drawers it allows for consistency. Good design is always consistent. It will also give the illusion that these drawers are not fake. The idea of putting a minimal intrusive towel bar works well because then it will serve more for function then aesthetics.
Where should pantry door handles be placed?
Pantry Doors- On a pantry door, or other tall cabinet doors, you should place the knob or pull opposite the hinges at a height based on your comfortability in using it. This should be about elbow height and will most times be the middle of the door height.
How do you find the center of a drawer?
Move the ruler across the drawer front diagonally in the other direction, from top right corner to bottom left corner. Trace the inner line of the ruler. Where the two lines intersect is the center point of the drawer, centered horizontally and vertically.
How long should Pulls be on cabinets?
While there is no set rule, we generally recommend that the pull length is approximately 1/3 of the cabinet or drawer width. Small Drawers that are 12” or less typically work best with a pull that is 3” to 4” long or a knob that is 1” in diameter.
What kitchen hardware is most popular?
Silver hardware is probably the most common finish you’ll see in kitchens and bathrooms. Satin/brushed nickel took the world by storm a few decades ago and it’s still very popular. That makes sense, because it’s a lovely complement to wood cabinets and all colors of kitchens and bathrooms.
What size pulls for 36 inch drawers?
Pulls 3-7 inches in length will sit the most comfortably on doors less than 24 inches tall. Cabinet doors 24-36 inches tall are best adorned with pulls 7-12 inches long, while cabinets taller than 36 inches such as pantries, built-in appliances and pullouts should be accompanied by pulls longer than 12 inches.
