Table of Contents
How much does it cost to buy and install a whole house fan?
Cost to Install a Whole House Fan To add a whole house fan, homeowners pay between $1,250 and $1,830 on average. On the low end, you can expect to pay between $700 and $950 including labor. On the high end, the project can cost $2,000 to $2,750 including labor.
How do I choose a whole house fan?
To get the proper whole house fan size, you should first calculate the square footage inside your home, excluding the basement, attic, and garage. Multiply the square footage by 3. For instance, if your home is 2,200 square feet, you’ll need a fan that can move 6,600 CFM of air per minute or more.
Do Whole House Fans work well?
Whole house fans can effectively cool down a house. Research conducted in California showed that homeowners who install whole-house fans reduced their dependency on their air conditioning systems by nearly 50%. The only time they were dependent on their air conditioning was on days of extreme heat.
How many CFM do I need for a whole house fan?
ft house you will need a whole house fan with ratings between 4000 to 6000 CFM. The basis of whole house fan size calculation is the number of air changes required in a house. According to the experts at Energy.gov, an official wing of US Department of Energy, a whole house fan need to make 3 to 6 air changes per hour.
Who makes the quietest whole house fan?
QuietCool QC CL-1500 – The Quietest Whole House Fan QuietCool comes with a high-quality whole house fan that can satisfy a lot of buyers’ needs. With 1472 CFM, this fan can be duct in the attic in order to reduce any unnecessary noise.
Do Whole House Fans cool the attic?
The whole house fan pulls air in from open windows and exhausts it through the attic and roof. It provides good attic ventilation in addition to whole house cooling. Whole house fans should provide houses with 3 to 6 air changes per hour (varies with climate, floor plan, etc.
How many windows should be open with a whole house fan?
A: Opening two or more windows half way or more is recommended. Basically you should make it easy for the home ventilation system to pull in air. As for which windows to open, for general cooling you want to open windows far away from the fan to provide airflow to the whole house.
What’s the difference between an attic fan and a whole house fan?
Attic fans are quite different. They’re installed up on a roof or through an exterior wall up in an attic. Whole-house fans need windows and doors open and attic fans need lots of soffit vents to suck cooler outdoor air up into the hot attic. Without this open space, the fans will not move much air.
How long should you run your whole house fan?
For best results, run your whole house fan for at least 10 minutes first thing in the morning to bring a cool breeze through the house and into the attic. This will expel any hot stale air buildup from the night before.
Can a whole house fan be installed vertically?
Comfort Cooler (CC) series whole-house fans may be mounted vertically, however, the AS and CSS shutters will not function properly in the vertical position. We do not carry a ceiling shutter for vertical installation.
Does a whole house fan use less electricity than AC?
When compared with the typical window AC unit or whole-home central air conditioning system, fans simply use less electricity. Whole-house fans and ceiling fans are among the most energy-efficient methods for cooling your home. They use between one-fourth to one-hundredth of the electrical power required for AC units.
How do I know what size attic fan I need?
So simply put, the size of an attic fan is calculated by multiplying the square feet area of the attic floor by 0.7. This number is further multiplied by 1.2 for a steep roof and 1.15 for a dark roof. This final number gives the CFM required for the attic fan for that particular attic.
Can you use a whole house fan in the winter?
Using a whole house fan during the winter can actually prove to be largely effective in a myriad of ways. Running your whole house fan also gives you superior circulation of air. During the winter, most homes become stale as people do not open their windows to let new and fresh air in.
Can a whole house fan cause mold?
And they are great for exhausting moisture as well that builds up in the home. Many homeowners that have a whole house fan love running them when they get out of the shower to exhaust all that steam and humidity that builds up and can cause mold.
Should I cover my attic fan in the winter?
Roof ventilation is important year-round. You should absolutely leave your roof vents open during the winter – do not cover them! During the winter, roof ventilation works to keep temperatures even. Closing your vents makes the attic space too warm and dry – dangerous conditions for mold as well as pests.
