Table of Contents
How much does Swedish finish cost?
Also known as acid-cured, Swedish finishes cost $50 to $80 per gallon. They typically come as a one-component or two-component finish with an acid catalyst and alcohol solvent. Once applied, the first coat dries within two to four hours so that the next coat can be applied after 24 to 48 hours.
What is a Swedish finish?
“Swedish finish” is simply a nice-sounding name for a conversion varnish, which cures by chemical reaction. Unlike most finishes, which form a layer on top of the hardwood, a Swedish finish actually chemically bonds with the wood—a “conversion” process that results in an especially hard finish.
How do you apply a Swedish finish?
For best results, vacuum carefully, and tack with water or a premium grade lacquer thinner using a Glitsa Tack Mop. Always apply subsequent coats within 4 to 8 hours of abrasion. For best results, allow a minimum of 4 hours dry time prior to final coat. Apply no more than two coats in a 24-hour period.
What is the most durable floor finish?
Polyurethane is the most popular finish for floors. It’s tough enough to handle constant traffic and is resistant to almost everything. There are two types of polyurethane finish: oil-based (solvent borne) and water-based (waterborne).
Is it cheaper to refinish or replace hardwood floors?
In general, it will almost ALWAYS be less expensive to refinish your hardwood floors. If you replace them, you need to pay for additional wood as well as ripping up and hauling away existing hardwood. Even if you have this, it will still be less expensive then replacing the whole floor.
How much does it cost to refinish $1000 square feet of hardwood floors?
The cost to refinish 1,000 square feet of hardwood flooring averages between $3,000 to $8,000.
Does Swedish finish yellow over time?
Yellows Over Time: A Swedish finish will change the color of the floor over time. As it ages, acid-cured finish will yellow to an amber patina altering the original color you so carefully selected.
How long does Swedish finish last?
In one week, 90 percent of the formaldehyde is out of the finish. By the end of 90 days, 99.9 percent is out, according to Filipp.
How do I clean Swedish finish floors?
To clean your Swedish finish hardwood, mix 1/2 to 1 cup of vinegar in a gallon of warm water. Mop the floor with this solution, and as soon as you’re finished, wipe off the excess water with a rag. You don’t have to rinse the floor, but stubborn dirt may require a second mopping.
What is the most durable finish for wood floors?
Polyurethane is actually the most durable hardwood floor finish.
Does Bona have yellow traffic?
Bona Traffic remains clear for the life of the floor meaning it will not amber or turn yellow with time. There is also Bona Traffic Anti Slip which only comes in satin sheen.
Is Swedish Finish oil-based?
Swedish finish is an alcohol-based acid-curing conversion varnish. It has been the industry standard for durability in the Northwest for many years, and we consistently achieve excellent results with Swedish finish.
Is water based or oil based polyurethane better for floors?
Oil based poly is a thicker poly, but it is also softer. Water based poly, an acrylic product, forms a thinner, but harder coating. Oil poly can be more susceptible to dents, while water based poly can be more susceptible to surface scratching.
Will polyurethane fill cracks in wood floor?
Sawdust and Unfinished Floors Mix the dust with some polyurethane and fill the cracks. Note that this method only works on an unfinished floor and will clash with pre-finished floors.
What is the healthiest type of flooring?
Healthier Flooring Use solid surface flooring instead of carpet. Choose FSC-certified solid wood. Use natural linoleum or tile made in the U.S. Choose low-VOC finishes and sealants. Look for NAF-certified products. Install without glue; use nail-down or click-lock. Avoid laminate, vinyl flooring and synthetic carpeting.
How much does it cost to refinish 1500 square feet of hardwood?
Cost per square foot to refinish hardwood floors: Flooring square footage Average cost 751 – 1000 sq. ft. $2,100 1001 – 1500 sq. ft. $2,350 1501 – 2000 sq. ft. $3,500 2001 – 3000 sq. ft. $5,000.
Is my hardwood floors worth refinishing?
In almost every case it is preferable to refinish rather than replace hardwood floors. Part of the appeal of hardwood is that it lasts so long. A quality hardwood floor can be sanded down and refinished at least six times, and up to ten times before you need to replace it.
What is the cheapest way to refinish hardwood floors?
Applying a revitalizer gloss is the simplest and cheapest way to refinish hardwood floors. This approach works best on floors that only have surface-level scratches and other minor wear and tear issues. You can get the job done without the need for equipment rentals or hard-to-find materials.
Can you refinish floors yourself?
If you only have some minor scratches and dings or a dull finish, you might be able to simply buff and add a new coat of varnish. But, even if your floors need a complete makeover, refinishing hardwood is a very manageable and rewarding do-it-yourself job that can save a lot of money.
How long do you have to stay off hardwood floors after refinishing?
How long do I have to wait to use my room after my floors are refinished? We recommend waiting 6 hours before walking on your new floors in socks. After 24 hours you can walk through with shoes on. Allow 48 hours before setting furniture and returning pets.
