Table of Contents
What do you call the handles on drawers?
A drawer pull (wire pull or simply pull) is a handle to pull a drawer out of a chest of drawers, cabinet or other furniture piece.
What is the standard size for drawer pulls?
Standard-sized drawers can use any of the following pull sizes: 3” (one or two), 4” (one or two), 96mm, and 128mm.
What can I use instead of drawer pulls?
Plastic toys from the dollar store or thrift shop are great pieces to start with. The plastic is softer and very forgiving if you end up needing to take a few tries to get the hole drilled out. They are somewhat large for your basic door knob or drawer pull, but could work on the right piece.
What are the different types of drawer pulls?
Cup/Pin Pulls. Handle/Bar Pulls. Bail Pulls. Finger Pulls. Appliance Pulls. Drop/Hanging Pulls.
What are the different types of cabinet handles?
Common Types of Cabinet Handles Traditional Steel or Nickel Pulls and Knobs. Source. This is probably the first image that comes to mind when you picture cabinet handles. Tubular Bar Pull. Source. Wire Pulls with Accents. Source. Pulls with Exposed Screws. Source. Ceramic or Glass Knobs. Source.
What should drawer pulls be made of?
Stainless steel is another option because it is so durable and easy to keep clean. Pewter and nickel are popular choices, too. Or, you can choose glass, crystal or ceramic knobs for a vintage look.
Do you put handles on fake drawers?
I would recommend putting pulls on the dummy drawers it allows for consistency. Good design is always consistent. It will also give the illusion that these drawers are not fake. The idea of putting a minimal intrusive towel bar works well because then it will serve more for function then aesthetics.
Can you mix drawer pull sizes?
There’s no “rule”, it’s a matter of looking at as many kitchens as possible and figuring out the look you prefer. I also used a variety of sized pulls on drawers of different widths, and used Restoration Hardware.
How do I choose drawer pull size?
There is no right or wrong size to choose, but we do recommend choosing pulls that have at least a 3-3/4″ center to center (the distance between the screw holes). This size looks pleasing on most cabinets, while still being large enough to grip comfortably. 5″ pulls are also an excellent choice.
How do you buy cabinet knobs?
How-To: Choose Cabinet Hardware Types of Cabinet Hardware. Knobs have smaller profiles than handles, are less expensive, and can be used for both drawers and cabinets. Pulls are larger than knobs, make more of a statement, and tend to be easier to grip. Select a Style. Choose a Finish. Don’t Be Afraid to Mix Metals.
What color knobs gray cabinets?
Silver hardware is the most common with grey cabinets as it can look sleek and refined. Nickel, chrome and stainless steel also provide that metallic detail that can pop against your cabinets.
How much is hardware for kitchen cabinets?
Expect to pay between $2 and $20 per knob or pull. For an average kitchen of 200 square feet with 30 lineal feet of cabinetry, you’ll need approximately 40 pulls/knobs, so you can expect to spend anywhere from $80 to $800.
Are knobs or handles better for kitchen cabinets?
In many instances, knobs make it easier to open upper cabinets. Pulls, on the other hand, offer easier operation of lower cabinets. Just take a look at this Victorian kitchen. You’ll notice that all the upper cabinets have knobs, while the majority of the lower cabinets feature pulls.
What is the most popular kitchen hardware?
Top 16 Most Popular Kitchen Cabinet Knobs and Pulls Alison Value Oversized Antique Brass Knob. 3-Inch Bit Pull (Oil Rubbed Bronze) Alison Value Center to Center Bar Pull. Somerset Melon Pull 7-inch (Brushed Satin Nickel Finish) Davenport Knob (Satin Nickel Finish) Square Twist T Handle Knob (Steel).
Should kitchen cabinets have knobs or pulls?
There are no strict rules to follow when choosing whether to select a knob or a pull or both. One preference is to use knobs for all doors and pulls for all drawers. For any large door such as a pantry and any pull-out door (including pull-out base pantries or trash pull-outs), use a pull.
Where do knobs go on Shaker style cabinets?
Center of the Stile: Knobs and pulls can be placed halfway up the stile of your Shaker door. Keep in mind you’ll want to be able to reach the handles, since they will be placed higher up along the stile. Just Above or Below the Corners: Place the knobs or pulls 2” to 3” from the lower or upper corner.
Can you mix knobs and pulls on kitchen cabinets?
Yes. You can mix knobs and pulls. It’s recommended to use pulls for cabinets that are higher up and knobs for lower style cabinets. Lower drawers that slide are typically fitted with a pull handle.
Are zinc cabinet pulls good?
Zinc is a good metal for cupboard pulls. Furniture handles, which are produced using zinc alloy material, are very durable and long-lasting. It is a material that is resistant to bad weather, moisture, and water due to its zinc composition.
What is the fake drawer under sink?
Fake drawer fronts are used to continue the visual line created by other drawers or cabinet openings. They are often placed in areas in which a drawer would not be appropriate, such as directly under sinks.
Where do you put knobs on a vanity?
Cabinet knobs are placed opposite of door hinges. On wall cabinets, knobs are usually placed 2-1/2” to 3” from the bottom corner of the door. On base cabinets, they are placed 2-1/2” to 3” from the upper corner of the door. If your drawer is 24” or wider, you may choose to place a second knob.
