Table of Contents
How much should cabinet pulls cost?
On average, a simple job such as installing cabinet pulls will cost between $100-$300. Projects that require extensive prep or repair work, hinge installation or a large number of cabinets will cost more.
How do I know what size drawer pulls to buy?
There is no right or wrong size to choose, but we do recommend choosing pulls that have at least a 3-3/4″ center to center (the distance between the screw holes). This size looks pleasing on most cabinets, while still being large enough to grip comfortably. 5″ pulls are also an excellent choice.
What sizes do cabinet pulls come in?
For standard size cabinetry (dimensions of 12″ – 36″) the most common pull sizes are 3”, 4”, 96mm, and 128mm center to center (from one screw hole to another). Standard knob sizes are 1 1/4″ or 1 3/8″.
Are knobs or pulls better for kitchen cabinets?
In many instances, knobs make it easier to open upper cabinets. Pulls, on the other hand, offer easier operation of lower cabinets. Just take a look at this Victorian kitchen. You’ll notice that all the upper cabinets have knobs, while the majority of the lower cabinets feature pulls.
Where do pulls go on kitchen cabinets?
Pulls are another versatile option that can be installed on both cabinets and drawers. For both upper and lower cabinets, the pulls should be installed vertically 2 ½ – 3 inches in from the corner of the door. For drawers, they should be installed horizontally in the center of the door.
What kitchen hardware is most popular?
Top 16 Most Popular Kitchen Cabinet Knobs and Pulls Alison Value Oversized Antique Brass Knob. 3-Inch Bit Pull (Oil Rubbed Bronze) Alison Value Center to Center Bar Pull. Somerset Melon Pull 7-inch (Brushed Satin Nickel Finish) Davenport Knob (Satin Nickel Finish) Square Twist T Handle Knob (Steel).
How much is hardware for kitchen cabinets?
Expect to pay between $2 and $20 per knob or pull. For an average kitchen of 200 square feet with 30 lineal feet of cabinetry, you’ll need approximately 40 pulls/knobs, so you can expect to spend anywhere from $80 to $800.
Can you mix cabinet pull sizes?
There’s no “rule”, it’s a matter of looking at as many kitchens as possible and figuring out the look you prefer. I also used a variety of sized pulls on drawers of different widths, and used Restoration Hardware.
What size cabinet pulls for 36 inch drawers?
Oversize Drawers (36″ or larger) For larger drawers, consider investing in longer-length stainless steel pulls such as 6”, 8”, 10” or even 12”. Another alternative to this is by using double smaller pulls, such as two 3” or two 5” pulls.
What is the rule of thumb for cabinet hardware?
An oversized cabinet door or drawer needs a large piece of hardware for proper functionality. A good rule of thumb for traditional or transitional style pulls is that they should be about one-third of the length of the cabinet drawer. Drawers larger than eighteen inches wide may require more than one pull or knob.
How long should Pulls be on cabinets?
While there is no set rule, we generally recommend that the pull length is approximately 1/3 of the cabinet or drawer width. Small Drawers that are 12” or less typically work best with a pull that is 3” to 4” long or a knob that is 1” in diameter.
How long should bar pulls?
Bar Pulls are traditionally measured center-to-center and they should not exceed 1/3 of the length of a cabinet door or width of a drawer. Pulls 3-7 inches in length will sit the most comfortably on doors less than 24 inches tall.
Do you put handles on fake drawers?
I would recommend putting pulls on the dummy drawers it allows for consistency. Good design is always consistent. It will also give the illusion that these drawers are not fake. The idea of putting a minimal intrusive towel bar works well because then it will serve more for function then aesthetics.
Do cabinets look better with hardware?
Cabinet hardware should match existing metalwork such as your sink faucet, or appliances. This creates a unified look in any kitchen or bathroom. Pick the same knobs and pull for the entire room, and make sure it matches the main finish in the room.
Should my kitchen cabinet pulls match my faucet?
Most of the time the kitchen faucet should match cabinet hardware!” But, sometimes strategically placing different metals next to each other can work for you, add interest or even make a statement.
What type of cabinet knobs are in style?
Cabinet Hardware Trends in 2021 Minimalist Style. No Hardware. Matching Cabinets. Cylinder Bar Pulls. Square Bar Pulls. Simple Knobs. Farmhouse Style. Matte Black.
Should cabinet pulls be centered?
As far as the height of your drawer hardware, the classic choice is to center them vertically. With multiple drawers stacked on top of each other, choosing this placement makes each knob a little lower and harder to reach.
Can you mix pulls and knobs on cabinets?
Yes. You can mix knobs and pulls. It’s recommended to use pulls for cabinets that are higher up and knobs for lower style cabinets. Lower drawers that slide are typically fitted with a pull handle.
