Table of Contents
What kind of battery does an Apple TV remote take?
Find the battery component on the back of your Apple Remote. Use a coin to turn the battery door counterclockwise until the door opens. Remove the old battery. With the positive side facing up toward you, put in the new CR2032 or BR2032 lithium 3V coin battery (available at most electronic and drug stores).
What do you do when your Apple TV remote battery dies?
Reset The Remote and Apple TV Connection Unplug your Apple TV from the power. Wait six seconds or more, then plug it back in. Try your remote again. If you are using the Siri Remote, you can reset it by simultaneously pressing the Menu and Volume Up buttons.
How long does Apple TV remote battery last?
The Siri Remote has a Lightning port, and comes with a Lightning to USB cable for charging it. Apple says the built-in lithium-ion battery can last “months” on a charge with normal use, but when it’s time to recharge you can just connect it, using the Lightning cable, to your Mac or a USB charger.
Do I need to recharge my Apple TV remote?
The Siri Remote has a rechargeable battery inside. With typical usage, you’ll need to charge it a few times a year. An alert appears on the TV screen when the remote battery is running low. You can also check the battery level in Settings.
Can you turn on Apple TV without remote?
You can turn on an Apple TV without a remote simply by plugging it in — once it’s plugged in, it will turn on automatically. If your Apple TV is in Sleep Mode, try unplugging it and plugging it back in to wake it.
How do I check the battery level on my Apple TV remote?
Check the Battery Level of Apple TV Siri Remote To check the battery charge level of your Siri remote, go to Settings > Remotes and Devices > Remote. On the following screen, you will see the Battery Level percentage. In this case, it’s well charged up (99%) since it needed it.
How do I fix my TV remote not working?
Section B: Checking items of the remote control (common) Make sure none of the remote buttons are jammed. Reset the remote. Clean the remote control terminals. Replace with fresh batteries. Perform a power reset on the TV. For Android TV/Google TV: symptoms may improve by updating the software of the remote control.
Why is my silver Apple TV remote not working?
Solution: Try restarting the Apple TV by following the below steps. – hold down the Menu + Down buttons for a few seconds and the Apple TV will restart normally. – if that doesn’t work, use the good-old technique of pulling the plug. Wait for at least 10 seconds and power up the Apple TV again.
Can I charge my Apple TV remote with my iPhone charger?
To charge the Siri Remote, connect the USB end of the cable to a power source, such an iPhone, iPad or iPod touch charger. You can also use a computer or a USB charger that plugs directly into an outlet. Virtually any power source will work.
How do I use my Apple TV without a remote?
Install the free Remote app and you can use your iPhone, iPad, or iPod Touch to control your Apple TV as long as everything is connected to the same Wi-Fi network. After installing the app, tap the Add Apple TV button to pair the app with your Apple TV.
Does any Apple TV remote work?
You can control your Apple TV with almost any existing infrared remote control. The only catch is that you’ll need a working Apple Remote, iPhone, iPad, or iPod Touch to get you into the Apple TV settings.
How do I control my Apple TV with my phone?
If you don’t see the Apple TV Remote icon in Control Center on your iOS or iPadOS device, you can add it manually. On the iOS or iPadOS device, go to Settings > Control Center, then tap Customize Controls. next to Apple TV Remote in the More Controls list to add it to Control Center.
What kind of charger does the Apple TV remote use?
To start it charging, connect one end of a Thunderbolt cable (you should have received one with your Apple TV) to the port on the bottom of the remote, and then plug the other into the USB port of a computer or a wall adapter. The charging port is in the same place in both the first- and second-generation Siri Remote.
Why has my remote control stopped working?
A remote control that will not respond or control your TV usually means low batteries. Make sure you are pointing the remote at the TV. There also may be something interfering with the signal such as other electronics, certain types of lighting, or something blocking the TV remote sensor.
Why did my remote stop working?
There are a number of reasons why your remote may not be working. The most common are physical damage, battery issues, pairing issues, or issues with the infrared sensor on the remote or TV.
Can I use my phone as a TV remote?
Set up your virtual remote On your Android phone, open the Google TV app . Near the bottom right, tap Remote . At the top, tap Scanning for devices. After pairing, you can use your phone or your remote.
How do I reset my Apple TV Silver remote?
How to reset an Apple TV remote Physically unplug your Apple TV and wait at least six seconds. Plug your Apple TV back in. Hold down your remote’s “Menu” and “Volume Up” buttons until you see a command flash on your screen saying it is pairing the remote.
