Table of Contents
How much does a flame sensor cost for a furnace?
Flame Sensor It stops your furnace from letting off large amounts of natural gas if it’s not working properly. If the sensor is bad, it won’t be able to sense heat and will turn the furnace off. The average cost to repair or replace a flame sensor is between $75–$200.
Are flame sensor universal?
Universal flame sensors: You might not need an exact replacement part. Universal sensors are available too. They are available at Home Depot, Menards or other building supply store.
How do I know if my flame sensor is bad?
First, check for your gas burners to light up and then go out after a few seconds. This is the most common sign of a sensor issue. Second, if you can actual see soot covering the tip of the sensor, it’s time for a cleaning. If you look at the tip and it’s black, it’s time for service.
How long do flame sensors last?
Flame sensor lifespan If you’ve just replaced the sensor or had a new furnace installed, you can expect the flame sensor to last for about five years. The average lifespan of a furnace is 15 to 30 years, so you can anticipate a flame sensor replacement once or twice over the course of your homeownership.
How do you trick a flame sensor?
Luckily, making such a check is very easy: Take a multimeter with microamps (µA) measuring system. Keep the furnace system turned on. Connect it to the wire that is leading to the gas valve. Connect the other side of the multimeter to the sensor terminal. Take the lead away from the flame sensor.
Do old furnaces have flame sensors?
Not all furnaces have a flame sensor, but if your furnace has one, it will be mounted close to the burner with the metal rod positioned in the flame. Flame sensors vary in size (2 to 4 inches) and shape (see examples below).
What happens when flame sensor goes bad?
What happens when a flame sensor goes bad? Without a flame sensor, your furnace will keep emitting gas even when there’s nothing to ignite it, resulting in hazardous gas buildup. If your flame sensor is dirty or faulty, it will automatically shut down the heating unit if it doesn’t detect a flame.
How do you bypass the flame sensor on a furnace?
Turn off electrical power to your furnace either at the furnace or at the electrical box. Close the gas valve. Remove the flame sensor.Cleaning the Flame Sensor Shut off power and gas to the furnace. Remove the sensor. Clean away soot and corrosion with a clean emery cloth. Reinstall the flame sensor. Restart the furnace.
Why is my pilot light not staying lit on my furnace?
If your pilot light won’t stay alight, it might be the thermocouple. Sometimes dust buildup collects on the thermocouple and blocks the sensor. Try cleaning the thermocouple and then relighting the pilot light. If it continues to go out, the thermocouple might need to be replaced.
Why does my gas furnace keep shutting off?
If your furnace keeps shutting off, it could be due to low airflow. There are several indirect issues that cause low airflow. Dirty Air Filters. If you don’t change your air filters often enough, the filters will become dirty and clogged, which means the heat exchanger retains heat and eventually causes it to overheat.
Why is the furnace blowing cold air?
A clogged filter is one of the leading reasons for a heater blowing cold air. But even if you swap the air filter with a brand new one, dirt and debris can still be found within the unit. This could eventually lead to overheating. If your furnace looks pretty dirty, call an HVAC provider for a professional clean.
Should I clean or replace flame sensor?
Once you clean off the sensor properly, it should go back to functioning like it’s supposed to. Unless the flame sensor is physically damaged or broken, you typically won’t have to replace it. They last a fairly long time, so most issues involved in the part not working right usually boil down to a fixable error.
How often does a flame sensor need to be replaced?
Note: According to HVAC.com, the expected lifespan of a flame sensor is about 5 years. Most furnaces last anywhere from 10 to 20 years. That means that you will have to replace a flame sensor 1x, 2x, or even 3x during a furnace’s lifespan.
What causes a dirty flame sensor?
It is a sensitive sensor so any type of dust or carbon buildup could cause it to malfunction. Most people have their furnaces in a basement or laundry area where there is excess dust in the air. This dust could stick to the sensor making it dirty and causing your furnace to shut down.
How often should you clean your flame sensor on your furnace?
A good rule-of-thumb is to change your filters every two to three months and to have the furnace fully cleaned once a year. The best time to clean your gas furnace is during the warmer months where you do not need to heat your home.
Why is my flame sensor not working?
A flame sensor failure is pretty common due to buildup of materials and particles in the confined area of the furnace. To clean the flame sensor, start by making sure your furnace is off—it can be turned off using the switch on the unit or by cutting the power source at the breaker box.
