Table of Contents
If you want to install under cabinet lighting as task lighting, you should place the strip lights closer to the middle front edge of the cabinets, so the countertop will be exposed to as much light as possible. For ambient or accent lighting, you may want to place them closer to the back edge.
How do you layout under cabinet lighting?
Rules of Thumb for Undercabinet Lighting Locate the fixtures at the front of the upper cabinet. Use lensed fixtures (and avoid bare LED light tape) to reduce glare from polished countertops. Use the longest fixture that fits to provide even light across the entire counter. Match the color temperature of the downlights.
How far apart do you put under cabinet lighting?
In general, you will likely want approximately 1-2 feet between puck lights, but if there is a shorter distance between the cabinets and kitchen counter, you may want to place them closer together, as the light will have less distance to “spread out.”.
How do you measure for under cabinet lighting?
Look underneath the wall cabinet where you placed your center mark. Each cabinet has a small lip around the outside edge. This creates a recess beneath the cabinet. Measure the distance inside the recessed area from the front of the cabinet to the back of the cabinet to obtain the cabinet depth.
Where should LED strip lights go?
5 great spots for LED strip lights around your home Under cabinets. As the name implies, under-cabinet lighting illuminates areas underneath your cabinetry. Along toe kicks. Under shelves. Under the bed. Behind computer and TV screens.
How many under cabinet LED lights do I need?
For 11-18 inches, use 2-3 puck lights. For 19-26 inches, use 3-4 puck lights. For 27-34 inches, use 4-5 puck lights. For 35-42 inches, use 5-7 puck lights.
How do you wire lights under cabinets new construction?
RUN CABLE. Before starting, be sure to turn off all power to the cabinet location at your home’s fuse/breaker box before working with electrical systems. CUT A HOLE. ATTACH THE LIGHTS. WIRE THE LIGHTS. WIRE THE SWITCH. TIME SAVERS – CABLE INSIDE THE CABINET. TIME SAVERS – CABLE UNDER THE CABINET.
How do you hardwire led under cabinets?
Then, follow these steps for installation: Disconnect the power. Locate the correct breaker and turn off the power supply to the switch outlet where you’re going to connect the lights. Attach the lights. Cut the wall. Run the wire. Run the cord. Connect the lights. Wire the switch. Cover your work.
What is the best wattage for under cabinet lighting?
As a point of reference, remember that kitchen counters – often lit by under-cabinet fixtures – need about 4 to 10 watts of power per foot with 5 mm LEDs or about 20 watts per foot with high-power LEDs. For precision lighting, you’ll need low-output lamps in tight clusters or evenly-spaced high-output LEDs.
How many lumens do you need for under counter lighting?
The required Lumen per foot depends on the intended usage. A guideline below: Accent lighting – 150 to 250 Lumens/ ft. Under-Cabinet Lighting & Nearby Task Lighting (Lamps) – 175 to 550 Lumens/ ft.
How do you install LED lights in kitchen?
Follow the steps below before you cut any of the lights or attach them to any surface. Lay out all the products to create a mock installation to make sure you have all the supplies necessary. Unroll the LED strip lights from the plastic reel. Attach the uncut lights to the power supply and turn on the power supply.
Do LED strip lights need to be plugged in?
Each LED strip segment must be connected to a DC power supply, or another LED strip segment that is connected to a DC power supply (daisy chain). The connection method will depend on the type of wires or plugs provided with the LED strip, as well as whether or not the DC power supply includes a plug.
Can you plug LED strip lights into an extension cord?
LED Strip Jumpers are best used to run as extension cables from the LED power source to the LED strips themselves. They can also be used to jump in between two reels of LED strips, just make sure you aren’t exceeding the maximum run length of your strip.
Can LED strip lights be hardwired?
LED Strip splitter cables come in up to 4-outputs so you could potentially have 4 strips running seamlessly from one Power Supply connection! This can be done with wire nuts or wiring all strips to a common positive and negative wire so you can make a one to one connection with the hardwired power supply.
Do you put LED strip lights on the wall or ceiling?
We recommend having the lights go up your wall, but if you prefer to start the line of lights from the top of your wall, you will need LED strip clips to help hold up the power supply against the wall.
How do you arrange LED lights?
If you choose to fit horizontally, it’s best to stick the LED as close as possible behind the lip of the drop-ceiling, in order to avoid light-dots shining on the vertical surface behind.
Do under cabinet lights go in front or back?
When mounting any fixture under a cabinet, position it to the front. If there is a lens, face it toward the backsplash. The bottom-front rail of the cabinet should hide the fixture from your line of sight, whether you’re standing or seated.
Do under cabinet LED lights need a transformer?
When installing low voltage under cabinet lights, you will have to take some special measures. You’ll need a transformer to convert your home’s voltage supply to a much Page 11 11 lower number, and if you plan to use any accessories, like dimmers, they’ll need to be compatible with your lighting system.
How long do LED Puck Lights last?
LED puck lights typically last between 20,000 hours and 50,000 hours. If your LED puck light is on 3 hours per day, the average, then your light can last about 22 years. One of the main benefits to LED lights is their lifetime. Unlike incandescent lights, which simply burn out, LED lights slowly dim over time….
