Table of Contents
How should I display the licence number on my pleasure craft? You must display the licence number on both sides of the bow, above the waterline, in block characters that are at least 7.5 centimetres (3 inches) high and in a colour that contrasts with the colour of the bow.
Where do boat registration numbers go?
Numbers and stickers issued at the time of registration must be placed on each side of the forward half of the vessel, usually on the bow (see the figures below). Registration stickers must be securely affixed three inches aft of, and in line with, the registration numbers.
What information is shown on the compliance notice on a boat up to 6 m in length?
Compliance notices on boats up to 6m (19’8”) will also contain recommendations for safe capacity limits in good weather. They will indicate the maximum safe outboard motor size and how much weight the boat can hold including the number of people on board and what they are carrying.
What is the number on the front of a boat?
Like a Vehicle Identification Number given to automobiles, the HIN is used to identify each boat. HIN’s are located at the stern of the boat, usually on the starboard side of the transom, or as close to that area as possible. It’s used to register your boat and to track your boat’s history.
Where on the boat are registration numbers placed quizlet?
How should a vessel’s registration number and validation decal be displayed? Number must be painted, applied as a decal or otherwise affixed to both sides of the bow, placed where it can easily be read. Number must be left to right on both sides of the bow. Number must be at least three inch high BLOCK letters.
What are the numbers on the side of the boat?
The boat registration number assigned must be attached to each side of the forward half of the vessel; they should be the only numbers on the forward half. They need to be in a contrasting color to the boat. Numbers should be in a block font and three inches in height.
What is a pleasure craft compliance label number?
The compliance notice states that the vessel complies with the construction requirements when it was built or imported (whichever date was most recent). The notice also shows the maximum number of people that can safely board the vessel. This is also known as a “capacity label.”Jul 6, 2010.
Where is the compliance label number on a boat?
This metal label is attached to your boat’s hull and it should be visible from the operator’s seat.
What information is shown on the compliance notice of a boat?
A compliance notice for a pleasure craft of 6 metres (19.7 feet) or less in length gives maximum recommended safe limits for that boat. These limits are: Maximum number of people who can be on board. Maximum weight (gross load capacity) the pleasure craft is designed to carry, including people, motor, equipment, etc.
Do I need numbers on the side of my boat?
Your Alberta pleasure craft must display the licence number at all times on both sides of the boat’s bow in a contrasting color and at a size of at least 7.5 centimetres (or 3 inches) high.
Do you need numbers on your boat?
Your Vessel Registration Number must: Be painted on or permanently attached to each side of your boat/vessel’s bow. Be written in plain, vertical block letters and numbers that are more than three inches high.
Do you have to have numbers on your boat?
NSW Boat Registration Numbers Must show boat registration numbers on each side of the vessel at least 150mm high and clearly visible while underway. They should be located on the forward section of the vessel’s hull on each side of the vessel.
Where must the validation decal be placed on a vessel?
Decal must be affixed on both sides of the vessel, directly underneath the main body of the registration number or, if there is insufficient room underneath, as close as possible to the registration number.
When Should navigation lights displayed?
Whenever you are operating between sunset and sunrise, or in other times of restricted visibility, such as in fog or rain, you need to display the appropriate navigation lights so that other boats can see you and take the appropriate action to avoid a collision.
What does the Navigation Rule 2 explain?
Rule 2 Responsibility. Nothing in these rules shall exonerate any vessel, or the owner, master or crew thereof, from the consequences of any neglect to comply with these rules or of the neglect of any precaution which may be required by the ordinary practice of seamen, or by the special circumstances of the case.
Which side is starboard on a boat?
Sailors began calling the right side the steering side, which soon became “starboard” by combining two Old English words: stéor (meaning “steer”) and bord (meaning “the side of a boat”).
How do you read a boat hull identification number?
The first three characters are a MIC (Manufacturer Identification Code) assigned by the Coast Guard to the manufacturer or the person importing the boat; characters four through eight are a serial number assigned by the manufacturer; the last four characters indicate the month and year the boat was built, and the model Apr 23, 2020.
Which of the following indicates the starboard side of this vessel?
The red light indicates a vessel’s port (left) side; the green indicates a vessel’s starboard (right) side.
What side of the boat is the bow?
The front of a boat is called the bow, while the rear of a boat is called the stern. When looking towards the bow, the left-hand side of the boat is the port side. And starboard is the corresponding word for the right side of a boat.
How should passengers be seated on a board a small aluminum boat?
Passengers on a small power-driven boat (or human-powered craft) should be sitting evenly so the weight is distributed evenly throughout the boat. Having too much weight on one side can negatively affect the performance of the boat and ultimately your safety!.
What is the correct way to measure the overall length of a pleasure craft?
Length overall is measured from the tip of the bow in a straight line to the stern of the pleasure craft, including any rear deck extensions (platforms). Bow sprits; rudders; outboard motors and motor brackets; handles; and other fittings and attachments are not included in the measurement.
What is a hull identification number hin?
The Hull Serial Number (HIN) is a unique, 12-digit number assigned to a pleasure craft that is constructed, manufactured, rebuilt, or imported to be sold or operated in Canada. If the boat does not have a transom, the HIN must be displayed on the right side at the rear of the hull.
How long is a hull identification number?
The Hull Identification Number (HIN) is a 12- or 14-character serial number that uniquely identifies a boat. The HIN is analogous to a VIN on a car.
What is compliance label?
What is label compliance? Label compliance is the process of ensuring that a product label meets all pertinent regulatory requirements. But it extends beyond government regulation and into industry standards.
What determines the number of fire extinguishers required on a pleasure craft?
What determines the number of fire extinguishers required on a pleasure craft? The type of devices on board and the length of the boat will determine the number and type of fire extinguishers required on your pleasure craft.
What should you do before fueling your pleasure craft?
Before Fueling Tie the pleasure craft securely to the fuel dock. Ask all passengers to leave the pleasure craft and go onto the dock. Do not allow anyone in your group or others at the fuel dock to smoke, strike a match, or use a lighter. Check to see that fuel lines, connections, and fuel vents are in good condition.
