Table of Contents
Where do I find the filter on my furnace?
The furnace filter is usually located inside of the blower compartment, where the return air enters the blower compartment. Most units have built-in furnace racks. The large metal furnace compartment contains a filter and blower.
Why can’t I find my furnace filter?
If you don’t find the filter by the return air duct, look for it behind a return air grill on the wall. Alternately, you may find an air grill on the ceiling with the filter concealed behind. The filter looks like a mesh screen encased in a thin box.
Is the furnace filter the same as the AC filter?
While many people refer to air conditioning and furnace filters as if they’re different, this is not the case. Your furnace and your air conditioning system use the exact same filter, so there’s no need to worry about purchasing separate filters for each piece of equipment.
Do I need to turn off furnace to change filter?
1. To Change Your Home Air Filter, You’ll Need To Turn Off Your Furnace. To prevent the HVAC unit from turning on while you are changing the filter, make sure you turn the thermostat to the “off” position. For maximum safety, disconnect power from your furnace system while you are doing maintenance.
How often should you change your furnace filter?
In general, this is how often changing furnace filters needs to be done: For 1- to 2-inch filters, replace them every 1 to 3 months. For 3- to 4-inch filters, replace them every 6 to 9 months. For 5- to 6-inch filters, replace them every 9 to 12 months.
Where is my home air filter?
Where Is The Air Filter Located In My House? Behind a register in your wall or on the ceiling. Behind a register in the floor (in older homes). On the HVAC unit near the air handler, which looks a bit like a furnace. Look for your air handler in the basement or the attic. The air filter slots into the air handler unit.
How many filters are in a furnace?
Most furnaces will have a V shape filter system; the system will take 2 filters. The filters go up into the plenum in a V shape. Make sure that when you re-install the top door, it goes over the furnace frame so it engages the safety switch.
How do you measure a furnace filter without a filter?
Disposable Furnace Filters – How to Measure Correctly If you do not have an existing air filter in your furnace, or your existing filter does not fit properly, you will have to measure the duct opening. To do so, you will need a flashlight and a stiff tape measure.
Do all furnaces have air filters?
Do All Furnaces Have Filters? Yes, all furnaces & heat pumps have filters. If your home uses another type of heating system, like a boiler which uses water to heat the home, you will not have filters, but for a furnace or heat pump, a filter is a vital component.
Can I change my own air filter?
You may not be ready to tackle car maintenance jobs like changing the oil or replacing spark plugs, but changing your vehicle’s engine air filter is an easy job that you can do. Doing this job yourself can result in big savings. Many quick lube shops charge up to $25 or more to change an air filter.
How much does it cost to change a furnace filter?
Although flat filter designs offer the most savings upfront, they need to be replaced more frequently and may cost you more in the long run. Replacing these filters can cost anywhere from $40 to $200 a year.
Why is my heat blowing cold air?
A clogged filter is one of the leading reasons for a heater blowing cold air. But even if you swap the air filter with a brand new one, dirt and debris can still be found within the unit. This could eventually lead to overheating. If your furnace looks pretty dirty, call an HVAC provider for a professional clean.
What happens if you use AC without filter?
Without a filter, the condensation drain will fail to drain the moisture from your AC unit. This will result in condensation accumulation on the Freon tubing. The condensation will then start dripping down the pan, causing water damage to the whole system.
What happens if you don’t clean your furnace filter?
Short Cycling. If the air filter is not serviced often enough, it will eventually become clogged to the point that air cannot pass through it. When the furnace is operating, the lack of air flow will trap the heat in the system. Without a new air filter, the furnace will overheat every time it starts up again.
Is it OK to change furnace filter while its running?
Do you have to turn off the Furnace to change the Filter? Yes, this is the safest thing to do. It’s important to shut off the power source to your appliance before beginning any furnace maintenance.
Is no air filter better than a dirty one?
Running your air conditioner without a filter is worse than running it with a dirty one. Instead, get to the store as soon as possible for a replacement or call an HVAC professional for replacement. Without a filter, your air conditioner is at risk for severe and expensive problems.
