Table of Contents
The drain pump is located at the bottom of your washing machine, but can be easily accessed in order to replace it if need be. If your washing machine is failing to drain during a wash cycle, it could be that there is a problem with the drain pump.
How do I know if my washing machine pump is bad?
Check the pump pulley by removing the pump from the washer and trying to rotate it by hand. If the pulley doesn’t turn freely and is frozen or stiff, replace it. Also, if the agitator is moving but the tub isn’t, this is a sign the pump is dying. For front-loading washers, do not attempt to open the door mid-cycle.
Do top load washers have a drain pump?
The drain pump is located underneath the washer and handles draining the tub between cycles. This guide will walk you step-by-step through replacing the drain pump for a top-load washer.
How much does it cost to replace a washing machine pump?
The price of a new washing machine pump is $25 to $40 on its own, not including labor. When hiring a professional, repair prices range from $200 to $450.
What would cause a washing machine to not drain?
Your washer may have a clogged drain hose or the pump may be broken. A broken lid switch or belt could also be the culprit. It may even be something as simple as the hose being jammed. Whatever the reason, the water will need to be drained from the washing machine before any work or diagnosis can be done.
Can a washing machine pump get clogged?
Your washing machine could suddenly stop draining after you use it for any number of reasons, but often it’s a clog in the drain pump. Small items have a habit of finding their way into the washer, and they can lodge in the pump, as can small clothing items.
How do I know if my washing machine drain hose is clogged?
If the hose is clogged, it can prevent the water from being pumped out of the machine. To test this, remove the drain hose attached to the washer and make sure it is clear. An easy way to check that the drain hose is clear is to blow air through it.
How do I know if my washing machine drain is clogged?
The surest and most obvious sign that your washing machine’s drain hose is clogged is if you notice that the water in your machine isn’t draining away properly. Many people first notice this after putting their laundry on the spin cycle and realizing that it’s still soaking wet at the end of the timer.
Where is the drain filter on a top load Whirlpool washer?
Usually, it will be on the bottom right of the washing machine, making access rather easy. Of course, your model may be different so you may need to consult the user’s manual or give your washer a quick look over to find it.
Where is the water pump filter on a top load washing machine?
The pump filter is responsible for protecting the pump from a build-up of lint and other obstructions. It should have a retractable pipe at the side so that you can drain the water. The filter is either obvious at the front, or hidden behind the kick-strip at the front of the laundry machine (if fitted).
How many years does a washing machine last?
A typical washer should last 10-13 years. Top-loading washers typically last a few years longer than their front-loading brethren. If you use a stacked washer/dryer combo, you may have to replace both if one starts acting up.
What causes a washing machine not to drain and spin?
If the washer won’t drain or spin, either something is stuck in the washing machine drain hose or pump, or the pump is broken.
How do you position a washing machine drain hose?
In order for the drain hose on your Top Load washer to function properly, the drain must be at least 30″ up from the floor and less than 8 feet high. In order for the drain hose on your Front Load washer to function properly, the drain must be at least 24″ up from the floor and less than 8 feet high.
How do you manually drain a washing machine?
If not, follow these steps: Step 1: Turn off the power and lay down towels. Step 2: Locate the drain hose at the back of the washing machine. Step 3: Drain the water. Step 1: Turn off the power and lay down towels. Step 2: Locate the drain hose. Step 3: Drain the water. Step 4: Scrub the filter.
How do I clear my washing machine drain pipe?
To unclog a clogged drain, first fill a bucket with boiling water and a pack of baking soda. Remove the drain pipe from your washing machine and slowly pour the water into the drain using a funnel. Wait a few minutes and test if it keeps draining if you pour water into it.
How do you unclog a main drain without a snake?
How to Unclog a Main Sewer Line Without a Snake Step 1 – Run Hot Water. Step 2 – Use a Chemical Drain Cleaner. Step 3 – Apply the Plunger. Another Way – High-Pressure Water. If Water Goes Through It Or To It, We Do It!.
Where is the P trap located?
The P-trap is the P-shaped section of pipe in the line that runs from the bottom of your sink to the wall. It’s shaped this way to trap sewer gasses and prevent them from coming out the sink as well as to catch debris that’s been washed down the sink, such as hair or food scraps.
