Table of Contents
The belt tensioner is on the front of the engine, between the crankshaft and alternator pulleys.
How do you loosen a belt tensioner?
Turn the bolt head in the center of the spring-loaded arm of the belt tensioner counterclockwise with a ratchet and socket to loosen the bolt. The tensioner will rotate freely before it comes to a stop. When the spring-loaded arm comes to a stop, continue to turn the bolt until the bolt loosens.
Where is the tensioner pulley located?
The tensioner pulley is on the end of a spring-loaded tensioner. The accessory drive belt rides on the pulley while the spring-loaded portion of the assembly puts tension on the accessory drive belt to keep it tight enough so that it doesn’t slip on the rest of the pulleys.
How do I know if my belt tensioner is bad?
One of the most common symptom of a bad or failing drive belt tensioner is noise from the belts or tensioner. If the tensioner is loose the belts may squeak or squeal, especially when the engine is first started.
Which one is the belt tensioner?
Symptoms of a Broken Tensioner The tensioner is located on the outside of a serpentine belt which is the smooth side of the belt. It puts tension on the belt to keep it tight. The serpentine belt stretches over time, so the tensioner puts more tension on it to keep it tight. A broken tensioner might click or squeal.
How much does a belt tensioner cost?
The average cost for drive belt tensioner replacement is between $236 and $268. Labor costs are estimated between $80 and $101 while parts are priced between $156 and $167.
Can you replace a belt tensioner yourself?
Serpentine belt replacement is easy because today’s automatic drive belt tensioners eliminate the need to loosen bolts or pry components into position for retensioning. Just rotate the tensioner, remove the old belt and install a new one.
Can you tighten a tensioner pulley?
Turn the adjustment bolt on the side, top or bottom of the pulley counterclockwise with the ratchet and socket until the accessory belt is loose enough to remove. Tighten the tensioner pulley by turning the adjustment bolt clockwise with the ratchet and socket until the belt is tight.
Can a belt tensioner making noise?
If any tensioner pulley begins to wear out with time, it’ll create more of a chirping noise. You’ll also hear the chirping noise if the pulley grooves are damaged. This happens over the years due to friction, leading to cracks in the belt.
Can I drive with a bad tensioner?
Driving with a bad belt tensioner is unsafe since the tensioner is meant to guarantee ample tension that powers accessories. Wear on the belt tensioner will eventually cause the belt to slip, generate loud noise, and also create an unsafe level of heat along the accessory pulleys.
Should I replace tensioner with serpentine belt?
Tensioners add pressure from an adjustable pivot point or spring mechanism to keep your serpentine belt taut as it circulates around the engine. There is no recommended timeframe in which to replace your tensioner, especially as the belt itself usually needs replacing before the tensioner does.
What happens when a drive belt tensioner fails?
When a timing belt tensioner fails, it loses tension. As a result, the timing belt becomes loose and the valve timing can be thrown off. This leads to engine performance issues. So if any suspicion arises that the timing belt tensioner has failed, it’s important to check the tensioner and replace it if necessary.
How do I know if I need a new tensioner?
Appearance: Cycle the tensioner (mounted on the engine) through the entire range of motion (from stop to stop) by applying torque to the arm with a wrench. The tensioner arm should move smoothly and freely. Solution: If you notice a binding, sticking or grinding tensioner arm, the tensioner should be replaced.
Are all belt tensioners the same?
There are three main types of belt tensioners found in the replacement auto parts market. Each one works a little differently, but all ensure that your alternator and auxiliary pumps receive the power needed to keep your car or truck moving.
Can you over tighten an alternator belt?
Dear Anthony: A belt should never be over-tightened. An over-tightened belt can burn out any bearing that the belt rotates on, including alternator, power steering pump, A/C compressor, idler pulleys, etc. An over-tightened timing belt can ruin any pulley bearing it is connected with.
How long does it take to replace a tensioner pulley?
What Is Tensioner Pulley Replacement? Replacing the pulley should only take an hour or two, and the parts will vary in cost from one type of car to the next.
Is the idler pulley and tensioner pulley the same?
The primary distinction between tensioners and idler pulleys is the presence of an adjustable bolt. Tensioners are positioned on the bolt through mounting. Idler pulleys are not mounted to an adjustable bolt. However, if bearings fail, tensioner and idler pulleys both require replacement.
How long does it take to replace a serpentine belt and tensioner?
It can take anything from 15 minutes to an hour (two at the most) to repair or replace a bad serpentine belt with a new belt.
What is the lifespan of a serpentine belt?
Serpentine belts are built to last—much longer than before because of advancements in rubber technology. Under ideal conditions, a belt should stick with you for an average of 60,000 to 100,000 miles.
Can you drive a car with a broken serpentine belt?
Can I Continue Driving My Car If the Serpentine Belt Is Broken? Technically, yes, you can continue driving your car, but not for long. For instance, without power steering, you’re likely to get exhausted very quickly from driving. Without a functioning belt, the water pump can’t cool the engine.
