Table of Contents
The anode rod will be located on the top side of the unit. In some cases, it may be directly connected to the hot water outlet line on top of the heater. If you have the user manual for the water heater, it will include a diagram which shows where the anode rod is located, otherwise consult the manufacturer’s website.
Do all water heaters have an anode rod?
Anode rods are an essential component of tank-style water heaters. Most anode rods are sacrificial, meaning they are designed to corrode (instead of your water heater lining). Tankless water heaters don’t have anode rods, but all standard tank-style water heaters do.
How often should you change anode rod in water heater?
Most water heater manufacturers will recommend inspecting the condition of the sacrificial anode every one (1) to three (3) years and replacing it when it has been consumed more than 50%. This is especially true if you have hard water or use a water softener.
How do I know if I need a new anode rod?
A bad anode rod can cause discolored water, a rotten egg smell, air in the lines and intermittent hot water. The anode rod protects the tank of electric water heaters & signs it should be replaced are a rotten egg smell, no heat & strange sounds.
Can you run a water heater without an anode rod?
Without a working anode rod, your water heater tank will be vulnerable to rust, corrosion, and other damaging effects of chemicals and minerals in your water supply.
How do you check an anode rod?
Turn Off Water and Fuel Supply (Gas or Electric) Locate the gas line near the bottom of your water heater. Drain Some Water. Drain a couple gallons of water—about 10% of the tank’s volume. Locate Anode Rod. Now, try to find the anode rod. Loosen the Hex Head and Remove the Anode Rod. Install New Sacrificial Anode Rod.
Are anode rods universal?
In most cases, water heater anode rods are universal. The only exceptions are : Buderus : They use another type of threading to install the magnesium anode. All other water heater brands use a regular magnesium anode with 3/4 ” NPT threads.
What size socket do you need to remove an anode rod?
4 Use a ratchet wrench and 1 1/16-inch deep socket to unscrew the anode rod from the heater.
How long will water heater last without anode rod?
Diminished Water Heater Lifespan: Without a sacrificial anode rod replacement, the average tank water heater will last a maximum of 8-12 years. However, your water heater may start failing as early as 5 years old without this essential care.
How much does it cost to replace an anode rod?
An anode rod costs about $50. Some homeowners may feel comfortable replacing it themselves. If not, call a professional plumber, who can assist. The cost of having it replaced professionally may be around $250 or $300.
Is it OK to remove anode rod?
Yes, you can cut your sacrificial anode rod, whether it is magnesium or aluminum, to replace it. To do this, use a pair of gloves and a saw and cut as you remove the old anode.
How often should you flush a water heater?
Tip: To maintain the upkeep of your water heater, flush your water heater every six months or so. If you have harder water, or water that contains more minerals, you may want to flush it more often.
What happens if you don’t change your anode rod?
When the rod itself becomes so corroded that it can no longer do its job, the tank soon rusts out, leaks and needs replacement. However, if you replace your water heater anode rod before it fails, about every five years, you can double the life of your water heater.
How do I know if my water heater has an anode rod?
First, you should look for your water heater’s manual. That will usually indicate where the rod is placed and probably even tell you how to remove it. As noted previously, most anode rods are near the top of the heater. Anode rods may also be closer to the hot water outlet.
How do I know what size anode rod to buy?
As a rule you want the anode to be “tip to toe” running the full height or length of the tank. If you cant see your brand on the chart then just measure the length of the tank and pick the closest length of anode. If the anode is too long they can be simply cut to length with a hack saw.
Do Bradford White water heaters have anode rods?
The anode rod in your Bradford White water heater is located at the hot water outlet of your tank. Unfortunately, it is not easily accessible. You must remove the hot water outlet to access it.
Which anode rod is better aluminum or magnesium?
For harder water an aluminum anode rod is the best choice for your heater and if you live in an area with soft water then a magnesium anode rod is your best choice. Aluminum anodes tend to be cheaper than magnesium anode rods. A magnesium rod will generally last less than an aluminum rod.
Is it too late to replace anode rod?
Anode rods are relatively cheap, usually costing between $30 and $40, and a plumbing pro can install them safely and quickly. The downside is that if you wait too long to replace the anode rod, it may be too late. If more than five years has passed, it may be too late to save the water heater.
Can anode rod causing rotten egg smell?
The most common cause of smelly water is anaerobic bacteria that exist in some water and react with the magnesium and aluminum sacrificial anodes that come with most water heaters to produce hydrogen sulfide gas, making the classic rotten egg odor.
Are anode rods standard size?
The diameter of residential water heater anode rods is universal at 3/4 inches. However, the length and type of the anode rod may not be the same. Also, some anode rods are attached to the top of the water heater, while others are connected to the hot water outlet.
