Table of Contents
The Sync Module has a physical reset button located next to the USB port on the side of the device (pictured below). This button should only be used to put your Sync Module into setup mode. Pressing this button will bring your system offline until you reconfigure your Sync Module.
Where is the blink module reset button?
The reset button is located on the right-hand side of the Sync Module next to the USB port. Please note that this could take between 15-30 seconds. This will cause the Sync Module to reboot into setup mode.
How do I reset my Blink Sync module?
To reset the module, you will press and hold the reset button on the device’s side—next to the USB port—until the light turns red. This may take 15-30 seconds. You will know that the reset was successful when you see one solid green light and one flashing blue light.
How do I reset my blink xt2 sync module?
How to reset Blink Module? Press and hold the reset button located at the side of the module for 10-15 seconds. Hold it until the light turns red. You will see the solid green and blue light when the reset is complete.
How do I get my sync module back online?
Follow the suggested steps from the Sync Module Offline screen. Verify Wi-Fi connection is working: Reboot the router and wait for internet to return. Verify your Sync Module is displaying a solid green and solid blue light. If your Sync Module falls offline again, try moving it closer to your wireless router.
What happens if you unplug Blink Sync module?
When the power goes out or your Wi-Fi drops (often for no good reason), your Blink cameras can become disconnected. Therefore, you may need to reset your Sync Module to reconfigure its network connection. This reset will allow you to reconfigure your device settings and prompt you to put in new Wi-Fi credentials.
How do I reset my Blink Wi-Fi?
From the the Camera Settings screen scroll down to the bottom and tap Change Wi-Fi. In the Change Wi-Fi screen, follow the instruction to “Press and release the reset button on the camera until red and blue lights flash. When ready, the lights will display: Blinking Blue, Steady Green.”.
How do I sync Blink module?
Adding a Sync Module From the home screen, tap the Add Device + icon. The Add Device screen displays your device options. The serial number is also printed as a QR code. Create a new system by tapping the text entry box and providing a name.
How do I unregister Blink module?
Tap the settings icon in the home screen’s footer. Select the system that contains the Sync Module you want to remove. Tap on Sync Module. Choose “Delete Sync Module” and then OK.
Why is my Blink Sync module blinking blue?
The blinking blue light indicates that your camera has already acquired the router information, but the network is poor. You can try as following: Reboot your router.
Why does my Blink Sync module keep going offline?
If you receive a “Camera Offline” notification that “Your Blink Mini is offline”, it means the Blink servers no longer have communication with the camera. The first, is to check the Wi-Fi internet and the power supply, then check the camera power connection.
What is the USB port on Blink Sync module for?
The Sync Module has a USB port as well, we intend to release a firmware update for it that will allow video clips to be stored locally in the sync module rather than in the cloud. The camera has a micro-USB port for power in case you don’t want to run the camera with batteries.
Can’t connect to Wi-Fi blink module?
Restart your device, or try switching the Wi-Fi setting off and on again to establish a connection. Make sure your mobile device is within range of your router or access point. Check that your router and any access points are powered on. Restarting your Wi-Fi router may also resolve this issue.
Does Blink Sync module need to be plugged in all the time?
Answer: Hello! Blink cameras cannot function without an active WiFi connection or an online Sync Module. If internet connectivity is lost or if the Sync Module is powered off, the system will go offline until it both are restored.
What does the red light on Blink camera mean?
The red light appears when you first insert batteries. If the red light is not visible, make sure the batteries are fresh. It is also possible to see a brief red flash during motion detection. When the batteries are failing, the camera LED flashes Red 5 or 6 times after the Blue recording light goes out.
What does blue blinking light mean?
Unless it is explicitly disabled, and ETE or ITE are not installed, the blue LED flashes if any of the following are true: Battery Charge is below 10% Battery Life is less than 15% RAM Memory Load is over 90% Storage Memory is over 90%Apr 2, 2017.
What does blue light mean on Blink camera?
Hello, the blue light flashing indicates that the camera is detecting movement. It will continue to blink blue for as long as movement is being detected.
What does blue light mean on Blink Mini?
Blink Mini On – Displays a green light on the front of the Mini camera when it is active and ready to use, then shows a blue light while recording. Off – Never display the Status LED. Recording – Displays a blue light while recording.
Why is my blink system not working?
If one of your Blink cameras isn’t responding, you may see error messages like “Camera Busy” or “Thumbnail Failed”. Wait two minutes for Internet service to be restored, then try using your camera again. Power cycle your camera. To do this, remove the batteries for 10 seconds and reinsert them.
Will any USB flash drive work with Blink?
No matter what generation USB 3.1 you have (USB 3.1 Gen 1 or USB 3.1 Gen 2), it will work with the Blink Sync Module 2. The Sync Module 2 has a USB 2.0 Type A port. The USB standard is backwards compatible, meaning all USB drives can be used with the Sync Module 2, so long as the size is between 1GB and 256 GB.
What is the difference between Blink Module 1 and 2?
With Module 2, you can either view your video clips on the Blink Home Monitor app or plug your drive into your computer and upload any clips you wish to save. For comparison, the Blink XT2 ships with the Sync Module 1, which offers free video cloud storage but has no local storage option.
