Table of Contents
The furnace filter is usually located inside of the blower compartment, where the return air enters the blower compartment. Most units have built-in furnace racks. The large metal furnace compartment contains a filter and blower.
Where is my furnace filter?
Your furnace filter will most likely be found in the blower of your furnace.Where Is My Furnace Filter? Horizontal HVAC unit – Furnace filter will be located on the intake side, slid into a rack. Vertical HVAC unit with air moving upwards – You can find your furnace filter in the bottom door.
Does every furnace have a filter?
Do All Furnaces Have Filters? Yes, all furnaces & heat pumps have filters. If your home uses another type of heating system, like a boiler which uses water to heat the home, you will not have filters, but for a furnace or heat pump, a filter is a vital component.
Is a furnace filter the same as an air filter?
While many people refer to air conditioning and furnace filters as if they’re different, this is not the case. Your furnace and your air conditioning system use the exact same filter, so there’s no need to worry about purchasing separate filters for each piece of equipment.
Where is my air filter located?
The air filter is typically located at the point where the return duct enters the air handler. Larger houses often have more than one HVAC system. Each system will typically have at least one air filter. Therefore, your home may have air filters located at the air handler AND in the returns.
How often do you change your furnace filter?
In general, this is how often changing furnace filters needs to be done: For 1- to 2-inch filters, replace them every 1 to 3 months. For 3- to 4-inch filters, replace them every 6 to 9 months. For 5- to 6-inch filters, replace them every 9 to 12 months.
Do I need to turn off furnace to change filter?
1. To Change Your Home Air Filter, You’ll Need To Turn Off Your Furnace. To prevent the HVAC unit from turning on while you are changing the filter, make sure you turn the thermostat to the “off” position. For maximum safety, disconnect power from your furnace system while you are doing maintenance.
What happens when you don’t change your furnace filter?
Short Cycling. If the air filter is not serviced often enough, it will eventually become clogged to the point that air cannot pass through it. When the furnace is operating, the lack of air flow will trap the heat in the system. Without a new air filter, the furnace will overheat every time it starts up again.
Will furnace stop working if filter dirty?
1. Dirty furnace filters. Dirty air filters are often the culprit behind an inefficiently performing furnace. That’s because air filters trap dust, dirt and debris like hair, which over time can restrict or block vital airflow, overheating the heat exchanger and preventing your furnace from working as it should.
Can you run a furnace without a filter for one night?
If you run a furnace without a filter for one night, it won’t affect your HVAC system detrimentally. However, the longer you run your heating system without an air filter, the more contaminants will accumulate inside your heating unit’s inner mechanisms.
Why is my heat blowing cold air?
A clogged filter is one of the leading reasons for a heater blowing cold air. But even if you swap the air filter with a brand new one, dirt and debris can still be found within the unit. This could eventually lead to overheating. If your furnace looks pretty dirty, call an HVAC provider for a professional clean.
How many filters are in a furnace?
Most furnaces will have a V shape filter system; the system will take 2 filters. The filters go up into the plenum in a V shape. Make sure that when you re-install the top door, it goes over the furnace frame so it engages the safety switch.
What does an air filter look like?
A clean air filter appears white or off-white in color, but as it accumulates dust and dirt, it will look darker in color. However, very often, the inner layers of filter paper inside the air filter might have dust and debris that is not visible even in bright light.
Do HVAC systems have filters?
All central heating and cooling systems should have an air filter, but the filter can be harder to locate on some HVAC units than others. The air filter is usually located in the return air duct or blower compartment before the return air reaches the air handler.
Why are my air filters so dirty?
Ducts that have holes, gaps, or leaks should be sealed up properly to prevent good air from getting out and bad air from getting in. If there is a leak in the return air ducts, the dusty, dirty air from spaces like that attic or crawl space gets sucked up into the ducts, dirtying the air filter and causing clogging.
How much is a furnace filter?
Although flat filter designs offer the most savings upfront, they need to be replaced more frequently and may cost you more in the long run. Replacing these filters can cost anywhere from $40 to $200 a year.
How often should you clean furnace ducts?
Experts advise having your air ducts cleaned every 2 to 3 years to prevent many maintenance and health problems before they start. However, homes with pets or children with allergies should have their air ducts professionally cleaned more frequently than the recommended average.
