Table of Contents
The EGR valve is usually located near or attached to the intake manifold, with a tube running to the exhaust manifold. There should also be a vacuum or electrical connector (or both) running to the valve which will need to be detached.
How do I find the EGR valve?
Answer: You’re going to be looking towards the side of the engine. The hose for the EGR valve connects to the engine just below the upper, large, radiator hose. The EGR hose is smaller than the radiator hose and easy to spot. Follow the hose back on the side of the engine and you will find the EGR valve.
Can I replace my EGR valve myself?
Can I Do It Myself? Although it’s possible to complete an EGR valve replacement yourself, due to the need to access the engine chamber, it’s not recommended unless you’re an experienced mechanic.
What are the symptoms of a faulty EGR valve?
What are the symptoms of a failing EGR valve? Your engine has a rough idle. Your car has poor performance. You have increased fuel consumption. Your car frequently stalls when idling. You can smell fuel. Your engine management light stays on. Your car produces more emissions. You hear knocking noises coming from the engine.
How much does it cost to fix EGR valve?
The average cost of replacing the EGR valve in your vehicle is anywhere from $250 to $350 on average, depending on your vehicle’s year, make, and model as well as the type of system it has. The cost of parts will be somewhere around $190 to $270, while the cost of labor will be anywhere from $60 to $80.
Does fuel injector cleaner clean EGR valve?
No the EGR passes exhaust gas that contains fine carbon particles. The carbon sticks to the valve and clogs it. Injector cleaner can only clean the inlet ports and back of inlet valves on port injection petrol engines.
What is the best EGR cleaner?
Best EGR Cleaner On The Market Wynn’s WY23381 Diesel EGR Cleaner. This is an aerosol product is especially developed for cleaning the air intake system of all diesel engines. Liqui Moly 2033 Pro-Line Intake System Purge. Holts EGR & Carb Cleaner.
Can you use brake cleaner to clean EGR valve?
When cleaning the egr valve, people say to use carb cleaner, but when your cleaning the valley where the oil cooler sits people say to use brake cleaner. in my limited experience, brake cleaner leaves behind residue but carb cleaner doesn’t.
What causes EGR valve failure?
The failures are usually caused by a build-up of deposits in the EGR valve over a period of time that causes them to stick. This build-up is part of the ordinary operation of the vehicle and should be regarded as a serviceable item requiring repair or replacement.
What is the code P0404?
When P0404 is triggered, it means that the PCM has been told that the valve is performing in a way that is outside of its specified parameters. More specifically, the PCM has been told that the valve is closed when it should be open, or vice-versa.
How long does it take to replace the EGR valve?
How long does an EGR valve replacement take? Looking once again at the averages delivered by our data, an EGR valve replacement should take around 3/4 of an hour.
How many miles should an EGR valve last?
An EGR valve may last 100,000 miles if the part is designed well, or it may last only 30,000 miles. Occasionally a part is faulty and requires replacing, but this is often covered under warranty depending on the age of the vehicle.
Is it hard to replace EGR valve?
In most models, replacing an exhaust gas recirculation (EGR) valve is not difficult. You can do it in your garage in about an hour or two, depending on your particular system, using some common tools and a good solvent like carburetor cleaner.
What happens if EGR valve is stuck open?
Symptoms of an EGR valve that is stuck open include rough unstable idle and stalling. If the EGR system is clogged up, or the valve is stuck closed, the combustion temperature increases. This may cause pinging (detonation), as well as surging on light acceleration.
Can EGR cause limp mode?
A faulty EGR can result in excessive carbon/soot at the turbine end of the turbo charger. This could cause the VNT mechanism to become clogged and stick which in many cases will cause engine management lights to appears along with reduced performance known as “limp mode”.
Under what conditions is the EGR valve open?
The EGR valve is closed when the engine is starting up. During idle and at low speeds, only a small amount of power is required, and therefore only a small amount of oxygen, so the valve gradually opens – it can be up to 90% open at idle.
Can you clean an EGR valve with wd40?
EGR I do not recommend cleaning with WD-40.
Can a blocked EGR cause smoke?
Dirty EGR valve. The EGR helps to re-circulate the engine emission by returning them to the combustion chamber and not sending them directly to the exhaust emission system. The carbon chucks could clog your EGR valve, which will result in loss of power, fuel inefficiency and emission of black smoke from your exhaust.
